Owner manual

Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Flash Firmware
Information about the version of the operational firmware located in the Flash memory of the FCSA.
This firmware is not used in NonStop S-series systems as they do not support system load through
the FCSA.
Version The version of the flash firmware running on the FCSA.
Default File Name The name of the file to be used for a firmware update.
Default File Version The version of the firmware to be used for a firmware update.
Compare State
Indication of the differences, if any, between the current and default firmware
versions. Values
Flash Boot Firmware
Information about the version of the boot firmware located in the Flash memory of the FCSA.
Version The version of the boot firmware running on the FCSA.
Default File Name The name of the file to be used for a firmware update.
Default File Version The version of the firmware to be used for a firmware update.
Compare State
Indication of the differences, if any, between the current and default firmware
versions. Values
Actions
Flash Boot Firmware Update
Updates the boot firmware in Flash memory of the FCSA.
Flash Firmware Update
Updates the operational firmware in Flash memory of the FCSA. Not required on NonStop S-series
systems.
Replace
Launches an interactive action to assist with replacement of an FCSA.
Note: This replacement procedure is intended for authorized service providers only.
When initiated, OSM checks for any connected paths that do not have a backup and warns you of
any connectivity loss that could result from continuing with the action. OSM also directs you to the
online help for precautionary guidelines for handling the hardware. See: