Owner manual

(FRUs) allow servers to communicate with NonStop K-series servers using a fiber-optic ring.
Location in OSM Tree: System > Group > Module > FX2SA
Slot Location: FXSA and FX2SA FRUs can be installed in slots 51 through 54 in processor or I/O
enclosures (service side).
Example: FX2SA (41.1.53)
Attributes
FX2SA
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required. Values
Physical
Power State
Whether the component is powered on. Values
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical
Right Squelch Detected
Indication of whether the carrier level is detected by the receiver
from the right direction:
True: Squelch is detected, meaning that the carrier signal cannot
be received.
False: Squelch is not detected, meaning that the carrier signal can
be received.
Unknown: Status or type of signal being received is unknown.
FOX Cluster Number
An integer, between 1 and 14, that identifies the node to which the
ServerNet/FX or ServerNet/FX2 adapter field-replaceable unit
(FRU) is connected.