Owner manual

G4SA SAC
A ServerNet addressable controller mounted on a G4SA (Gigabit Ethernet 4-port ServerNet adapter).
Each G4SA SAC contains up to four G4SA PIFs, which correspond to the four Ethernet ports on
each G4SA.
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > G4SA > G4SA SAC
Example: G4SA SAC $ZZLAN.G4SA1.0
Attributes
G4SA SAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required. Values
Logical
Automatic Boot
Indicates whether the SAC boot firmware is automatically reloaded if it
terminates abnormally.
Enabled: The boot firmware is automatically reloaded.
Disabled: The boot firmware is not automatically reloaded.
Unknown: Automatic Boot state could not be read.
Automatic Dump
Indicates whether the SAC will dump information about the reasons the
SAC aborts operations.
Values, as established through the SCF AUTODUMP command, are:
Off: Indicates that the SAC will not autodump.
On: Indicates that SAC will autodump.
Extended: Indicates that additional information is dumped. The size of an
extended G4SA dump file is significantly larger. Use this option only at the
direction of HP service provider.
Device State
The state of the component as known to the NonStop Kernel operating
system on the server. Values
Download File Name The file name of the operational firmware running on the SAC.
Download File Version The version of the operational firmware running on the SAC.
Dump File Name
Displays the default naming convention for dump files. The default value
($SYSTEM.SYS00.C061D00) can be altered in SCF. The first dump file
name ends in 00. Each subsequent dump file automatically receives the
next sequential number.