Owner manual

Owning Processor The processor to which the G4SA SAC is connected.
Processor Access List
The currently available processors that can access the resource.
Example: 0,1,4,8,9
Firmware
Version The version of the boot firmware for the SAC.
Default File Name
The name of the file to be used for a (boot) Firmware Update.
Default File Version
The version of the firmware to be used for a (boot) Firmware Update.
Compare State
The differences, if any, between the current and default boot firmware
versions.Values
Actions
Abort
Terminates operation of the G4SA ServerNet addressable controller. When the Abort action finishes,
the SAC is in the Stopped state.
Dump
Copies a memory image from a G4SA SAC to a specified file on the local system.
Firmware Update
Updates the boot firmware for the G4SASAC.
Responsive Test
Runs an online test that verifies the SAC is integrated with the LAN subsystem, is owned, and is in
the Started state.
Start
Loads the controller operational code and starts the ServerNet addressable controller. The SAC must
be in the Stopped state before you perform this action. When the Start action completes, the SAC is
in the Started state.
Stop
Rather than automatically stopping the G4SA SAC (as the Abort action does), this action first warns
you if the SAC is currently in use (and stops it only after you confirm).
Test Verify
Runs the power-on self-test for the SAC.