Owner manual

IOAM 13.2 is located in group 13, module 2. The other IOAM in this IOAM group is IOAM 13.3.
Each IOAM contains:
A ServerNet Switch Board●
Two IOAM Power Supplies●
Two IOAM Fans●
Up to five FCSA or G4SAs●
Note: If for any reason a ServerNet switch board is not present in a module, the fans, power
supplies, and adapters in that module will not appear in OSM.
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM
Example: IOAM 13.2
Attributes
Physical
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Locator
User-assigned text that can be used to help identify the module. The text is
assigned by using the Set Locator action.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Actions
Read LCD
Displays all 16 lines of the IOAMs LCD text in the Action Detail dialog box.
Rediscover
Causes OSM to refresh and reanalyze the I/O adaper module (IOAM) and all subcomponents.
Refresh refers to OSM updating the attribute values displayed in the OSM Service Connection
interface. Reanalyze refers to the running of OSM incident analysis, which checks EMS event
messages and creates alarms in OSM if certain conditions exist.
Set Locator
Allows you to assign identification text, up to 64 characters, that is displayed by the IOAM Locator
attribute.