Owner manual

Starts the LIF.
Stop
Rather than automatically stopping the LIF (as the Abort action does), this action first warns you if
the LIF is currently in use (and stops it only after you confirm).
Maintenance Switch
An Ethernet switch that allows the OSM console to communicate with the Maintenance Entity (ME)
in the ServerNet switch board.
Location in OSM Tree: System > Monitored Service LAN Devices > LanSwitch
Example: LanSwitch SRSLAN
Attributes
Logical
Contact
Configurable contact name set in the web interface (launched by the Link to
Web Interface action) by selecting Configuration tab > System Info > System
Contact.
Device Name
Configurable identifier set in the web interface (launched by the Link to Web
Interface action) by selecting Configuration tab > System Info > System Name.
Device Status Indicates whether the switch is up or down.
Firmware Revision The version of the firmware running on the switch.
IP Address The IP address of the switch.
Lines Connected Lists the port numbers of ports on the switch that have lines connected.
Lines Disconnected
Lists the port numbers of ports on the switch that have been disconnected
(since the OSM server has been running).
Location
Configurable location identifier set in the web interface (launched by the Link
to Web Interface action) by selecting Configuration tab > System Info >
System Name.
MAC Address The media access control (MAC) address of the switch.
ROM Version The version of the startup bootcode for the switch.
Serial Number A unique identification number assigned to each switch in manufacturing.
Actions
Link to Web Interface
Opens a Web interface that provides detailed device configuration and information for the
maintenance switch.