Owner manual

action completes, the MIOE is in the Started state.
Stop
Rather than automatically stopping the MIOE (as the Abort action does), this action first warns you if
the MIOE is currently in use (and stops it only after you confirm).
MIOE PIF
The physical interface through which the MIOE is logically connected to the system.
Location in OSM Tree: System > Group > Module > PMF2 > MIOE >MIOE SAC > MIOE PIF
Example: MIOE PIF $ZZLAN.MIOE0.0.A
Attributes
MIOE PIF
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required. Values
Logical
Device State
The state of the component as known to the NonStop Kernel operating
system on the server. Values
Processors with Data Path
Lists the processor numbers for processors that have a successful data
path to the PIF. If no processor has a path, "None" is shown.
Example: (1)
Hardware MAC Address The media access control (MAC) address of the PIF hardware.
Actions
Abort
Terminates operation of the MIOE PIF. When the Abort action finishes, the PIF is in the Stopped
state.
Configure LIF
Configures the associated LIF.
Start
Starts the MIOE PIF. The PIF must be in the Stopped state before you perform this action. When the
Start action completes, the PIF is in the Started state.