Owner manual

SCSI Bus Number
The bus to which the device is attached:
Bus 1 or 2: Internal device
Bus 3: External device
Actions
Responsive Test
Verifies that the component is installed and responding.
SEB
The ServerNet expansion boards (SEBs) and cables allow processors in one enclosure to
communicate with processors in another enclosure. Each SEB CRU provides either the ServerNet X
fabric or the ServerNet Y fabric for a group.
Location in OSM Tree: System > Group > Module > SEB
Slot Location: SEBs must be located in slots 51 and 52 of processor enclosures (service side).
Example: SEB (1.1.52)
Attributes
SEB
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required. Values
Physical
Power State
Whether the component is powered on. Values
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical
Disabled ServerNet Ports
Which, if any, ServerNet router ports on this CRU are disabled. OSM
actions to disable or enable a ServerNet port are performed as directed by
OSM alarm repair actions.