Owner manual

Attributes
Switch Node Port
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or
service is required. Values
Transceiver Physical
Type
The type of transceiver.
Example: 9/125 Micron SMF
Part Number The vendor part number of the transceiver.
Serial Number The vendor serial number of the transceiver.
Hardware Revision The vendor hardware revision of the transceiver.
Logical
Connectivity Status
The status of the port.
Values:
Port reset
Loss of optical signal
Transceiver absent
PIC absent
No link alive
Link Alive - Port disabled
Neighbor check in progress
Neighbor check complete - Port disabled
Neighbor check failed - No link alive
Connected to switch
Connected to switch with wrong numeric selector
Connected to switch with invalid configuration version identifier
Connected to wrong port
Connected to different switch
Connected to switch with incompatible configuration
No response to Manage Port command from neighbor port
Manage Port command not acknowledged (NACKed) from
neighbor port
Port enabled
Invalid
Unknown