Owner manual

G4SA FRU PMCU Tape Collection
G4SA PIF PMF CRU Tape Drive
G4SA SAC PMF2 CRU TRSA CRU
Group Power Supply Unknown CRU
Internal ServerNet Fabric Processor UPS (IOAM)
SAC
ATM3SA (ATM Adapter) CRU
A customer-replaceable unit (CRU) that connects the ServerNet SAN inside a server to an
Asynchronous Transfer Mode (ATM) network through a logical connection known as an ATM line.
Each ATM CRU contains one ATM line.
Location in OSM Tree: System > Group > Module > ATM3SA
Slot Location: ATM CRUs can be located in slots 53 and 54 in processor enclosures (service side)
or in slots 51, 52, 53, and 54 in I/O enclosures (service side).
Example: ATM3SA (12.1.53)
Attributes
ATM3SA
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required. Values
Physical
Power State Indication of whether the component is powered On or Off.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical
Dump Filename The name of the file used to store dumps of the ATM CRU memory.
Physical Transmission Type
The type of transmission used by the ATM CRU. This might be either
a standard, such as SONET, or a line speed, such as 155 Mbps.
MAC Address The media access control (MAC) address of the ATM CRU.