Owner's manual

Chapter Five - SCSI Bridge Electronics
5.13.2 Activating a hardware self-test
Enter
Set-Up 3
PRESS to
Select
Hdwr
Test
PRESS to
Run
Hdwr
Test
Testing
Scsi
Hdwr
Test
Ram Test
& Reset
InFourmm
========
Power On
SelfTest
C7438A
Rev L610
5242
T133BID5
Enter
Set-Up 3
PRESS to
Select
Hdwr
Test
PRESS to
Run
Hdwr
Test
Testing
Scsi
Hdwr
Test
Ram Test
& Reset
InFourmm
========
Power On
SelfTest
C7438A
Rev L610
5242
T133BID5
Figure 42 Activating a hardware self-test
This diagnostic item provides you with a more thorough method of testing memory and peripheral
hardware.
5.13.3 Making a code tape
Figure 43 Making a code tape
The firmware for the SCSI bridge electronics can be copied to another unit by making a code
tape. Configuration settings are not carried across in this tape. They must be entered
manually. You are prompted to insert a scratch tape. During operation, the Performance
display appears using 64k transfers. Upon successful completion, the tape unloads and you
return to the menu system.
HP StorageWorks DAT 72 (Model 5242-2SE) User's Guide 27 HP Part Number 528297-003 July 2005