Manual

HP NonStop Time Synchronization User’s Guide Page 42 of 81
messages to be logged. The default value of 3 should be used under normal
circumstances.
Value Range: 1 through 4
Default Value: 3 (All error and warning messages are logged.)
Example: Level = 4
Suppress True | False
If True, duplicate messages logged in succession are suppressed and counted, and a
summary message is written to the log file indicating how many times the message
occurred. If False, no suppression is performed and all log messages are written directly
to the log file.
Value Range: True or False
Default Value: True
Example: Suppress = False
4.3.5 Tracing Options
Tracing configuration options are contained in the Tracing section of the configuration
file. These options define what data is traced, where trace data is written, and how much
data is captured and retained.
Enabled True | False
True if tracing is enabled and False if tracing is disabled. Tracing is disabled by default
and should remain disabled unless you are trying to diagnose a problem and are
instructed to enable it by HP support personnel.
Value Range: True or False
Default Value: False
Example: Enabled = True
FileName <value>