Owner's manual

5157/5157 ACL S-Series DLT Subsystems Installation Users Guide
Operating the 5157 ACL Tape Drive 6-11
The first line in Figure 6-6 shows a numerical fault symptom code
(FSC). The second line shows a brief description of the error, in
place of the words ‘Error Description.’ The third and fourth lines
will contain a one- or two-line message describing the initial error
recovery procedure (ERP).
6.6 Selecting Control Panel Display Modes
As previously described, the POST Screens, the Initialization
Screen and the Default Screen appear without operator or host
intervention. The Fault Screens appear whenever a fault occurs.
The screens that follow appear in response to operator actions.
6.7 The 5157 ACL Menu Structure
Figure 6-7 on the next page shows the structure of the 5157 ACL
menus.