Owner's manual

5157/5157 ACL S-Series DLT Subsystems Installation/Users Guide
Installing and Configuring the 5157/5157 ACL Digital Linear Tape Subsystem
for S-Series Servers
7-9
7.3.2.2.3 Module
A module is a set of components sharing a common hardware
interconnection, such as a backplane. A module is a subset of a
group, and it is usually contained in a system enclosure. A module
contains one or more slots. In a Himalaya S-Series server, there is
exactly one module in a group.
7.3.2.2.4 Slot
A slot is a labeled physical space in an enclosure into which a CRU
or field-replaceable unit (FRU) can be installed. Service providers
trained by Tandem replace FRUs.
7.3.2.2.5 Identifying CRUs
CRUs in Himalaya S-Series servers are identified by their
physical location. There are no subchannel addresses as there
were in previous Tandem systems. To locate any CRU, the
following must be known:
group number The group number identifies all objects
connected through the service processors
(SPs) located on the processor multifunction
(PMF) CRUs. For Himalaya S-Series
servers, this includes everything
in the system enclosure.
module number For Himalaya S-Series servers, there is only
one module in a group, so the module
number is always “1”.
slot number The slot number identifies a position within
a module. A label beneath the slot indicates
the slot number.