Owner's manual

5157/5157 ACL S-Series DLT Subsystems Installation/Users Guide
Installing and Configuring the 5157/5157 ACL Digital Linear Tape Subsystem
for S-Series Servers
7-15
Issue the SCF INFO TAPE command after the ADD TAPE
command is finished to verify that the tape drive has been properly
configured. For example:
->INFO TAPE $TAPE0, DETAIL
STORAGE - Detailed Info TAPE configuration \TSIS72.$STK
Adapter Name.......................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50
*Adapter Location (Group,Module,Slot).. (1,1,50)
*BackupCpu............................. 1
*Compression........................... ON
*Density............................... 6250
*DeviceID.............................. 5
*HighPin............................... ON
*MaxOpens.............................. 4
*PrimaryCpu............................ 0
*Program............................... $SYSTEM.SYSTEM.OTPPROCP
*RecSize............................... 2048
SAC Name.............................. $ZZSTO.#PMF.SAC-3.GRP-1.MOD-1.SLOT-
50
*StartState............................ STARTED
The following ADD TAPE command adds a 5158 ACL tape drive
connected to the PMF CRU in group 02, module 1, and slot 50 to
the system configuration using the name $TAPE1:
->ADD TAPE $TAPE1, SENDTO STORAGE, LOCATION
(2,1,50), DEVICEID 5, &
->PRIMARYCPU 2, BACKUPCPU 3,
For more information on the ADD and INFO commands, see the
SCF Reference Manual for the Storage Subsystem.