Owner's manual

5157/5157 ACL S-Series DLT Subsystems Installation/Users Guide
Unpacking and Installing the 5157/5157 ACL Tape Subsystem
2-21
Figure 2-19 is a picture of the pushbutton rivets.
Figure 2-19 Pushbutton Rivets
2.7.1 Installation of the Rear Cover
Four of the rivets and screws will be used to install the rear cover.
To install the rear cover, line up the holes on the cover with the
holes on the cabinets. Place a rivet in each of holes and then push
in the screw.
2.8 Installation of the 5157/5157 ACL Tape Subsystem
Because the 5157/5157 ACL drives are shipped already in the tape
subsystem, there is minimal installation involved unless spare drives
need to be installed into the subsystem.