Owner's manual

5157/5157 ACL S-Series DLT Subsystems installation Users Guide
Installing and Configuring the 5157 ACL Tape Subsystem 5-14
5.6.11 Set Autoclean Mode:
This setting allows the user to enable an automatic cleaning cycle
which operates as part of the cartridge unload sequence whenever
the Use Cleaner LED comes on. To use this option, reserve a slot
for a cleaning cartridge using the Reserve Slots option. The default
is disabled.
NOTE: The Autoclean Mode can only be used when operating in the
Random Mode and using host library software, such as TSI’s
Autocartridge Loader Media Manager (ACLMM).
5.6.12 Set Negotiation:
This option offers two choices: Initiate Synchronous Negotiation
and Set Transfer Rate. Initiate Negotiate, if set, allows the 5157
ALC to initiate SCSI Synchronous Negotiation with the host (the
default is No). The 5157 ACL always responds to host-initiated
negotiation.
Set Transfer Rate can be set to 10 Mbytes/sec, 5 Mbytes/sec or
Asynchronous. The default is 10 Mbytes/sec.
5.6.13 Set Reserved Slots:
This setting enables to withdraw from use a specified number of the
slots in the magazine. At least one reserved slot is required in order
to use the Autoclean option.
NOTE: Reserved Slots can only be set when operating in the Random
Mode and using host library software, such as TSI’s Autocartridge Loader
Media Manager (ACLMM).