User guide

Actions
Set LED State
Turns on or off the amber LED located on the fan. The current state is indicated by the LED State
attribute.
FC-AL I/O Module
Attributes
Actions
Subcomponent of a FCDM.
There are two FC-AL I/O modules in each FCDM. These modules are the interface between the
FCDM elements and the host controller. They route data to and from the drives using loop A and
loop B.
Location in OSM Tree: System > Group > FCDM Collection > FCDM > FC-AL I/O Module
Example: FC-AL I/O Module (111.211.1.93)
Attributes
FC-AL I/O Module
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
LED State
Indicates whether or not the FC-AL I/O Modules (amber) fault LED is
blinking.
Value: Blinking or Off
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Type The vendor hardware type.
Logical
Device State
The state of the component as known to the operating system on the
server. Values