User guide

Location in OSM Tree: System > Group > FCDM Collection > FCDM
Example: FCDM (111.211.1)
Attributes
FCDM
Service State
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Manufacturer Identifies the manufacturer of the component.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Serial Number
The serial number of the component assigned to it by the supplier of the
component.
Type The vendor hardware type.
Physical Location
The values displayed by these attributes are assigned through the Set Physical Location action.
Rack Name
A user-defined name assigned to identify the rack in which the FCDM is
located.
Rack Offset A number assigned to describe the location of the FCDM within the rack.
Locator
An optional text string assigned to further identify the physical location of
the FCDM.
This attribute is displayed only if a value is specified using the Set Physical
Location action.
Alarm Panel Identifier
For Telco systems only.
This attribute is displayed only if a value is specified using the Set Physical
Location action.
Logical
Vendor Product ID
The product identifier of the component assigned to it by the supplier of
the component.
Vendor Product Revision
A code that identifies the generation of the component. Assigned by the
supplier of the component.
World Wide Name A unique, 64-bit number assigned to the hardware ports.