User guide

Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Manufacturer Identifies the manufacturer of the component.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Flash Firmware
Information about the version of the operational firmware located in the Flash memory of the FCSA.
This firmware is not used in NonStop S-series systems as they do not support system load through
the FCSA.
Version The version of the flash firmware running on the FCSA.
Default File Name The name of the file to be used for a firmware update.
Default File Version The version of the firmware to be used for a firmware update.
Compare State
Indication of the differences, if any, between the current and default firmware
versions. Values
Flash Boot Firmware
Information about the version of the boot firmware located in the Flash memory of the FCSA.
Version The version of the boot firmware running on the FCSA.
Default File Name The name of the file to be used for a firmware update.
Default File Version The version of the firmware to be used for a firmware update .
Compare State
Indication of the differences, if any, between the current and default firmware
versions. Values
Actions
Flash Boot Firmware Update
Updates the boot firmware in Flash memory of the FCSA. It is not possible to do this update unless
the FCSA has a disk configured through it. If the Flash Boot Firmware Compare State is Unknown,
an update attempt will likely fail.
Flash Firmware Update
Updates the operational firmware in Flash memory of the FCSA.