User guide

FCSA FSAC
Attributes
Actions
A fibre channel SAC (ServerNet addressable controller) is one of two fiber-optic plug-in cards
mounted on an FCSA (Fibre Channel ServerNet adapter).
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > FCSA > FSAC
Example: FCSA FSAC (13.3.1.1)
Note: The ports on the FCSA are numbered from top down when viewing the FCSA installed in
a rack. Thus, FCSA FSAC 1 is attached to the upper port (port 1), FCSA FSAC 2 is
attached to the lower port (port 2).
Attributes
FCSA FSAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Node Name
A number (read from the hardware) that uniquely identifies each FCSA FSAC. Until
an attached disk is configured and started, the Node Name attribute is displayed as
0xFFFFFFFFFFFFFFF.
Port Name
A number (read from the hardware) that uniquely identifies each fibre channel port
connected to the FCSA FSAC. Until an attached disk is configured and started, the
Port Name attribute is displayed as 0xFFFFFFFFFFFFFFF.
Actions
Responsive Test
Verifies that the FCSA FSAC is present and responding. (To pass the test, a disk using this FSAC
must be configured and started.)
FESA (Fast Ethernet ServerNet Adapter)
Attributes
Actions
An adapter that connects the ServerNet connections inside a server to a 10/100Base-TX local area
network (LAN).
The Fast Ethernet ServerNet adapter (FESA) CRU contains one Fast Ethernet ServerNet addressable
controller (SAC), which contains one Ethernet physical interface, that corresponds to the one