User guide

Ethernet port on each FESA CRU.
Location in OSM Tree: System > Group > Module > FESA
Slot Location: FESA CRUs can be located in slots 53 and 54 in processor enclosures (service side)
or in slots 51, 52, 53, and 54 in IOMF or IOMF2 enclosures (service side).
Example: FESA $ZZLAN.FESA1 (1.1.53)
Attributes
FESA
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Manufacturer Identifies the manufacturer of the component.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Power State
Whether the component is powered on. Values
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Logical
Configured Type
The configuration type of this resource.
Values: CCSA, E4SA, FESA, G4SA, GESA, TRSA, Unknown
Device State
The state of the component as known to the operating system on the server.
Values
Actions
Abort
Terminates operation of the Fast Ethernet ServerNet adapter (FESA) and the associated Ethernet
ServerNet addressable controller (SAC). When the Abort action finishes, the FESA and the SAC are
in the Stopped state.
Start
Starts the Fast Ethernet ServerNet adapter (FESA) and the associated Ethernet ServerNet addressable
controller (SAC). The FESA and the SAC must be in the Stopped state before you perform this