User guide

you if the PIF is currently in use (and stops it only after you confirm).
G4SA SAC
Attributes
Actions
A ServerNet addressable controller mounted on a G4SA (Gigabit Ethernet 4-port ServerNet adapter).
Each G4SA SAC contains up to four G4SA PIFs, which correspond to the four Ethernet ports on
each G4SA.
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > G4SA > G4SA SAC
Example: G4SA SAC $ZZLAN.G4SA1.0
Attributes
G4SA SAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Logical
Automatic Boot State
Indicates whether the SAC boot firmware is automatically reloaded if it
terminates abnormally.
Enabled: The boot firmware is automatically reloaded.
Disabled: The boot firmware is not automatically reloaded.
Unknown: Automatic Boot state could not be read.
Automatic Dump State
Indicates whether the SAC will dump information about the reasons the
SAC aborts operations.
Values, as established through the SCF AUTODUMP command, are:
Disabled: Indicates that the SAC will not autodump.
Enabled: Indicates that SAC will autodump.
Extended: Indicates that additional information is dumped. The size of an
extended G4SA dump file is significantly larger. Use this option only at the
direction of HP service provider.
Device State
The state of the component as known to the operating system on the server.
Values
Download File Name The file name of the operational firmware running on the SAC.
Download File Version The version of the operational firmware running on the SAC.