User guide

Rack Name
A user-defined name assigned to identify the rack in which the IOAM
enclosure is located. You can enter up to eight alphanumeric characters.
Rack Offset
A number assigned to describe the location of the IOAM enclosure within
the rack.
Locator
An optional text string assigned to further identify the physical location of
the IOAM enclosure.
This attribute is displayed only if a value is specified using the Set Physical
Location action.
Alarm Panel Identifier
For Telco systems only.
This attribute is displayed only if a value is specified using the Set Physical
Location action.
Actions
Replace IOAM Enclosure or ServerNet Switch Board
Launches a guided procedure, which provides step-by-step instructions for replacing the entire
IOAM enclosure or an individual ServerNet switch board within the enclosure.
Set Physical Location
Allows you to assign these Physical Location attributes for the IOAM enclosure:
Rack Name is a user-defined name for the rack containing the IOAM enclosure. You can enter
up to eight alphanumeric characters.
●
Rack Offset is a numerical value representing the location of the IOAM enclosure within the
rack. A valid integer must be specified when performing the Set Physical Location action, or
the action will fail.
●
Locator is an optional text string to help identify the physical location of the IOAM enclosure.
It must contain alphanumeric characters only.
●
Alarm Panel Identifier is used for Telco systems only.●
IOMF (I/O Multifunction)
Attributes
Actions
Each I/O multifunction (IOMF) CRU contains these components:
A service processor (SP)●
A power supply●
Three SCSI controllers●