User guide

Disabled ServerNet Ports
Which, if any, ServerNet router ports on this CRU are disabled. OSM
actions to disable or enable a ServerNet port are performed as directed by
OSM alarm repair actions.
Actions
Disable ServerNet Port
Disables the specified ServerNet port on this CRU. Perform this action only as directed by OSM
alarm repair actions.
Note: If the port being disabled is an NNA port connected to an External Servernet Switch, you
must issue a Reset on the Primary SP in Group 1.
Parameter: Port Number
Enable ServerNet Port
Enables the specified ServerNet port on this CRU. Perform this action only as directed by OSM
alarm repair actions.
Note: If the port being enabled is an NNA port connected to an External Servernet Switch, you
must issue a Reset on the Primary SP in Group 1.
Parameter: Port Number
Replace
Launches the Replace MSEB guided procedure, which provides step-by-step instructions for
replacing the MSEB CRU.
PIC
Attributes
Actions
A replaceable component of MSEB or IOMF2 CRUs that provides connectivity to internal*
ServerNet fabrics.
* In port 6 of the MSEBs located in slot 51 and 52 of group 01 only, NNA-type ServerNet PICs can
be used to provide connectivity to external ServerNet fabrics.
Location in OSM Tree: System > Group > Module > IOMF2 > PIC
Example: PIC (1.1.52.1)