User guide

Power Supply (FCDM)
Attributes
Actions
Subcomponent of a FCDM. There are two power supplies in each FCDM.
Location in OSM Tree: System > Group > FCDM Collection > FCDM > Power Supply
Example: Power Supply (111.211.1.95)
Attributes
Power Supply
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
LED State
Indicates whether or not the power supplys (amber) fault LED is blinking.
Value: Blinking or Off
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Type The vendor hardware type.
Logical
AC Power State Whether the power source is On or Off.
Device State
The state of the component as known to the operating system on the
server. Values
Vendor Hardware Revision
A code that identifies the generation of the component provided by its
supplier.
Actions
Blink LED Off
Turns off the blinking of the power supplys (amber) fault LED.
SCF Equivalent: SCF Control SAC $ZZSTO.#sac-name, deviceid(shelf,bay), LED OFF
Blink LED On