User guide

Reason for Suppression
Why the creation ability was suppressed, displayed as free
form text.
This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.
Time of Suppression
The date and time the creation ability was suppressed.
This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.
Duration of Suppression
How long the suppression will last (in minutes). The
default value is 40 minutes. You can extend he time using
the Extend Problem Incident Report Suppression Time
action.
This attribute is shown only if the Problem Incident Report
Creation State value is Suppressed.
Actions
Add Node to ServerNet Cluster
Launches a guided procedure that adds the local system to a ServerNet Cluster. This procedure is
also used to configure or display information for Expand-over-ServerNet line handlers.
Collect Diagnostic Data
This action collects diagnostic data for your system. Upon performing the action, you are prompted
to specify date and time parameters. Based on the date and time specified:
Diagnostic events are collected for a period of 12 hours (configurable through OSMCONF
file) before and three hours after the specified date and time.
●
Diagnostic Data files, such as ZZAAxxxx, ZZSNxxxx, and ZZPSxxxx, are collected for a
period of three hours starting from the specified date and time.
●
The volume in which this diagnostic data is collected is specified by the Set Data Collection Volume
action.
Disable Advanced Storage Configuration
Disables the system's Advanced Storage Configuration State attribute. In the disabled state, no
advanced storage configuration changes, such as Flexible Disk Configuration or configuration of
ESS disks, can be made on the system.
Enable Advanced Storage Configuration
This action changes the system's Advanced Storage Configuration State attribute to Enabled. This
state must be enabled before you can configure ESS disks in SCF or perform Flexible Disk
Configuration.