User guide

Responsive Test
Verifies that the CLIM is installed and responding. The CLIM must be in Started state before you
can perform this action.
Start
Puts the CLIM in a state to accept regular I/O commands. When the Start action completes
successfully, the CLIM is in the Started state.
Stop
Puts the CLIM in a state to disallow regular I/O commands. When the Stop action completes
successfully, the CLIM is in the Stopped state.
Common Attribute Values
Battery Charge Status
Compare State
Device State
Enabled State
Group Type
Path State
Power State
Processor State
Processor Type
Service State
Tape Types
Topology
Battery Charge Status
Value Meaning
Absent The battery is not installed.
Charged The battery is fully charged
Charging The battery is in the process of being charged.
Disabled
The battery cannot supply power and cannot be charged, possibly because the Disable
Battery action has been performed. You should disable a battery before removal.
Discharged The battery needs recharging or replacement.
Discharging The system is currently drawing power from the battery.