User guide

Stop Disk
Terminates all paths for this disk drive. When the Stop action finishes, the paths are in a Down state.
If the disk drive is currently in use, a dialog box warns you and asks whether or not you want to
continue with the action.
Stop Primary Path
Terminates the primary path to the disk. When the Stop action finishes, the path is in a Down state. If
the disk drive is currently in use, a dialog box warns you and asks whether or not you want to
continue with the action.
Stop Volume
Terminates all paths for the primary and mirror drives of this volume. When the Stop action finishes,
the paths are in a Down state.
Switch Process Pair
Switches the primary and backup disk I/O processes.
Switch to Backup Path
Switches processing from the primary to the backup path.
Switch to Primary Path
Switches processing from the backup to the primary path.
Test Verify
Runs the power-on self-test for the disk and tests the internal circuitry of the drive.
Verify Physical Connectivity
Verifies connectivity to the disk on a particular path.
E4SA (Ethernet 4 ServerNet Adapter)
Attributes
Actions
An adapter that connects the ServerNet connections inside a server to an Ethernet local area network
(LAN). The Ethernet 4 ServerNet Adapter (E4SA) CRU contains two Ethernet ServerNet
addressable controllers (SACs), each of which contains two Ethernet physical interfaces, for a total
of four Ethernet ports on each E4SA CRU.
Location in OSM Tree: System > Group > Module > E4SA