User guide

Parameter: Port Number
Enable ServerNet Port
Enables the specified ServerNet router port on this CRU. Perform this action only as directed by
OSM alarm repair actions.
Parameter: Port Number
Start
Starts the Ethernet 4 ServerNet Adapter (E4SA) CRU and the associated Ethernet ServerNet
addressable controller (ESAC). The E4SA CRU and the ESAC must be in the Stopped state before
you perform this action.
During startup, the controller operational code is automatically loaded into the ESAC. When the
Start action completes, both the E4SA CRU and the ESAC are in the Started state.
Stop
Rather than automatically stopping the E4SA (as the Abort action does), this action first warns you if
the E4SA is currently in use (and stops it only after you confirm).
EMU
Attributes
Actions
The Environmental Monitoring Unit (EMU) is a subcomponent of a FCDM.
Location in OSM Tree: System > Group > FCDM Collection > FCDM > EMU
Example: EMU (111.211.1.99)
Attributes
EMU
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.