Manual

Configuring the MSMM Server on the NonStop
System
Mid-Range Silo Media Manager Installation and User’s Guide—541530-003
3-27
Running the Server Processes on the NonStop
System
Running the Server Processes on the NonStop System
Once MSMM has been configured on the HP NonStop S-series system, the TCP/IP
process name PARAM needs to be set and the process executed before connecting to
the robot using the GUI.
1. Create an obey file to run the MSMM server as shown in Figure 3-26.
2. Type “OBEY STATUS” to see if the MSMM processes have started. Figure 3-27
shows the files and processes that are running.
3. Press Enter.
Note. Use the appropriate home terminal process for your system. Server files and client files need to be run by
using SUPER.GROUP access.
Figure 3-26. OBEY_GO