Owner's manual

FSAC (Fiber ServerNet Addressable Controller)
The Fiber SAC (ServerNet addressable controller) is a fiber-optic plug-in card mounted on the ServerNet/DA CRU.
External storage devices are physically connected to the Fiber SACs.There can be up to four Fiber SACs on each
ServerNet/DA CRU.
Location in OSM Tree: System > Group > Module > SNDA > FSAC
Example: FSAC (11.1.53.1)
Attributes
FSAC
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK. Values
Service State
Physical
The track ID of the switch logic board.Track ID
The part number of the switch logic board.Part Number
The hardware revision of the switch logic board.Hardware Revision
The type of CRU this SAC is connected to.
Values: SSAC, FSAC, SCSI
CRU Type
Logical
The type of storage device supported by this Fiber SAC.
Values: Disk, Tape, SCSI Controller, Not Configured, Unknown
Configured Type
Actions
Responsive Test
Verifies that the component is connected and responding.
FSAC (Fiber ServerNet Addressable Controller) 133