Owner's manual

VIO Logic Board
Component of a VIO enclosure (represented in the OSM Service Connection as VIO module), the VIO logic board
provides ServerNet connectivity between processors, ServerNet adapters, and attached hardware devices. Each VIO
logic board contains five ports. Ports 1 through 4 providing connectivity to processors 0 through 3. Port 5 represents
the crosslink connectivity to the VIO enclosure on the opposite fabric.
OSM software communicates with an internal part of the board, represented by an IME (integrated maintenance entity)
object in the OSM Low-Level Link.
Attributes
VIO Logic Board
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK. Values
Service State
Physical
A code that identifies the generation of the component. Hardware revision codes are
used for tracking components.
Hardware Revision
Indicates whether the VIO logic board LED is on or off.LED State
Identifies the manufacturer of the component.
Displayed for VIO logic board in S-series VIO modules only.
Manufacturer
The part number of the component that was assigned in manufacturing. Use part
numbers for identifying and ordering parts.
Part Number
A unique serial number that identifies the component.Track IDs are used for tracking
components.
Track ID
Logical
The date and time of the last soft reset of the VIO logic board.Time of Last Reset
This attribute is displayed only within the Multi-Resource Actions dialog box, to
indicate whether the VIO logic board is on the X or Y fabric.
Fabric Side
ME FPGA
The VPROC of the ME FPGA (Field Programmable Gate Array) image currently
loaded on the VIO logic board.
Version
The full path name of the default ME FPGA file on the server.Default File Name
The version of the ME FPGA image in the default FPGA file.Default File Version
The differences, if any, between the current and default ME FPGA versions. ValuesCompare State
ME Firmware
The version of the ME firmware running on the VIO logic board.Version
The name of the file to be used for a firmware update.Default File Name
The version of the firmware to be used for a firmware update .Default File Version
The differences, if any, between the current and default firmware versions. ValuesCompare State
Actions
Dump Memory
Dumps a snapshot of the VIO logic board's memory, created by the Enable Memory Snapshot action, to a file in
$SYSTEM.ZSERVICE.
You can view the filename in the Action Detail dialog box for this action.
The filename convention is ZMmmmssn, where:
VIO Logic Board 219