Owner's manual

The differences, if any, between the current and default configuration files. ValuesCompare State
FPGA
The VPROC of the FPGA (field programmable gate array) image currently loaded
on the switch logic board.
Version
The full path name of the default FPGA file on the server.Default File Name
The version of the FPGA image in the default FPGA file.Default File Version
The differences, if any, between the current and default FPGA versions. ValuesCompare State
Actions
Blink LED Off
Turns off the blinking of the fault LED.
Blink LED On
Causes the fault LED to blink to make it easier to identify the component.
Configuration Update
Loads a configuration file from the local node to the switch logic board and prompts the user to change the numeric
selector to the desired value. For details, see the ServerNet Cluster 6780 Planning and Installation Guide.
Optional Parameter: File Name— the name of the configuration file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
Dump
Copies a memory image from a 6780 switch to a specified file on the local system.
Firmware Update
Loads a firmware file from the local node to the switch logic board. For details, see the ServerNet Cluster 6780 Planning
and Installation Guide.
Optional Parameter: File Name—the name of the firmware file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
FPGA Update
Loads an FPGA code file from the local node to the switch logic board. For details, see the ServerNet Cluster 6780
Planning and Installation Guide.
Optional Parameter: File Name—the name of the FPGA code file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
Hard Reset
Hard resets the switch logic board.
SCF Equivalent: RESET SWITCH, HARD
Replace
Invokes the Replace Switch Component guided procedure that helps to replace the switch logic board.
Soft Reset
Soft resets the switch logic board.
SCF Equivalent: RESET SWITCH, SOFT
Switch Logic Board 255