Owner's manual

OSM Interfaces
OSM Service Connection
The OSM Service Connection is the primary OSM management component.You use the OSM Service Connection
to log on and establish a connection with a NonStop server. From the Management window, you can manage the
resources of your server. If your server is part of a ServerNet cluster, you can also manage cluster resources.
OSM Notification Director
The OSM Notification Director is a component of the OSM client software package that receives, forwards, and displays
information about the servers for which it is configured. The OSM Notification Director can be configured to run as a
Windows service whether or not anyone is currently logged onto the PC. For more information, see the OSM Notification
Director online help.
If you do not configure OSM Notification Director to start automatically as a Windows service, you must manually open
it every time you start your system console.To verify that the OSM Notification Director is running, check for the OSM
Notification Director icon in the Windows system tray, located on the main Windows task bar.
Opening the OSM Notification Director Window If It Is Running:
In the Windows system tray, double-click the OSM Notification Director icon.
Starting the OSM Notification Director If It Is Not Running:
On the main Windows task bar, click Start and then select Programs>HP OSM>OSM Notification Director>Start.
OSM Notification Director Main Window
The OSM Notification Director window has three parts:
Allows you to access all OSM Notification Director dialog boxesMain menu
Allows you to view, sort, authorize, and delete incident reports from several serversReport List
Allows you to view, save, or delete status and error messages from the time you start the applicationStatus box
OSM Notification Director Functions
• Receives, displays, and allows you to take action on problem incident reports, periodic incident reports, software
configuration incident reports, and test dial-out incident reports
• Configuration of remote access (dial-in) and remote notification (dial-out) information
• Configuration of dial-out point status for your system console
• Specification of the interval at which your OSM server generates periodic incident reports
• Authorization (automatically or manually) of incident reports to be dialed out to your service provider
NOTE: You can receive and dial out incident reports only from systems for which your system console is a primary
or backup dial-out point.
OSM Guided Procedures
Guided procedures are launched by OSM actions:
For ObjectOSM ActionOSM Guided Procedure
Each CRUReplaceReplace PMF, IOMF, SNDA, SEB,
MSEB
HP NonStop Cluster Switch (model 6770) and
subcomponents (UPS and AC transfer switch)
ReplaceReplace Switch II Component
HP NonStop ServerNet Switch (model 6780)
and subcomponents (logic board and PIC)
ReplaceReplace 6780 Switch
IOAM Enclosure and ServerNet Switch BoardFor the IOAM Enclosure, the action is
Replace IOAM Enclosure or ServerNet
Switch Board.
For the ServerNet Switch Board, the
action is Replace.
Replace ServerNet Switch Board or
IOAM Enclosure
Disk Drive Enclosure and subcomponents
(Fibre Channel disk drive, FC-AL I/O module,
EMU, power supply, and blower)
ReplaceReplace Disk Drive Enclosure (or
component)*
32 Introducing OSM