Manual

SL500 (M852x) Tape Library Installation and User’s Guide—541531-002

6-1

Configuring the M8521 Tape Library

for the Integrity NonStop NS-Series

Server

The section covers:

Supported Connection

You can attach the M8521 tape library (control path and data path) to a Fibre Channel

ServerNet adapter (FCSA) on an Integrity NonStop NS-series server.

Adding the Control Path and Data Path

To add the control path, issue this SCFcommand:

SCF> ADD SCSI $device, SENDTO STORAGE, PRIMARYLOCATION

(group, module, slot), PRIMARYSAC sac-id, LUN lun-id,

PRIMARYPORT 64-bit-portname

Example:

SCF> ADD SCSI $M8521, SENDTO STORAGE, PRIMARYLOCATION

(110,2,2), PRIMARYSAC 2, LUN 0, PRIMARYPORT 1234567891234567

Supported Connection 6-1

Adding the Control Path and Data Path 6-1

Note. The control path is used to control the robot, and the data path is used to control the

tape drive or drives.

Note. To obtain the portname numbers for your control path and data path, contact a service

representative from STK. The portname numbers used in this section are examples only.