Owner's manual

Nomadic Disk Manager Interface
ServerNet Nomadic Disk User’s Guide—425485-001
7-12
LISTDEV Command
LISTDEV Command
Use the LISTDEV command to perform an SCF STATUS DISK command on a set of
objects.
SEGMENT { segname | * }
specifies which segments are affected by the LISTDEV command. You can specify
the volumes in only a particular segment (segname) or all volumes in all segments
(*).
If you do not include the SEGMENT parameter, the volumes in the current segment
are affected. An implicit LISTDEV command is performed following each UP or
DOWN command, whether that command is explicit or implicit.
Examples
ND> LISTDEV
ND> LISTDEV, SEGMENT *
ND> LISTDEV, SEGMENT ONE
LISTDEV [ , SEGMENT { segname | * } ]