Owner's manual

Nomadic Disk Manager Interface

ServerNet Nomadic Disk User’s Guide—425485-001

7-15

RESET Command

Use the RESET command to perform an SCF RESET DISK command on a set of

objects. The RESET command places objects that are in a HARDDOWN state into a

DOWN state.

VOLUMES

specifies to reset all volumes in the specified segments.

PATHS { -P | -B | -M | -MB | PRIMARY | MIRROR | ALL }

specifies that the command affects only the selected path for each volume in either

the specified segments, or all segments.

SEGMENT { segname | * }

specifies to reset all volumes or paths in the specified segment (segname), all

segments (*), or in the current segment (if you do not include the SEGMENT

parameter).

Examples

>ND RESET VOLUMES

>ND RESET VOLUMES, SEGMENT *

>ND RESET PATHS -MB, SEGMENT ONE

RESET { VOLUMES|PATHS { -P|-B|-M|-MB|PRIMARY|MIRROR|ALL } }

[ , SEGMENT { segname | * } ]

-P resets the primary path

-B resets the backup path

-M resets the mirror path

-MB resets the mirror backup path

PRIMARY resets both the primary and backup path in a single operation

MIRROR resets both the mirror and mirror backup path in a single

operation

ALL resets all four paths in a single operation. Specifying ALL is

not equivalent to specifying VOLUMES.