Owner's manual

Nomadic Disk Manager Interface
ServerNet Nomadic Disk User’s Guide—425485-001
7-19
TAKE Command
TAKE Command
Use the TAKE command to change the status of a segment to OWNED. The prior status
of the segment can be anything; that is, it need not be NOT OWNED.
SEGMENT segname
species which segments are to be taken.
If the assumed or specified segment name (
segname) is a data segment, then all
data segments are taken. If the SEGMENT parameter is not included, the TAKE
command operates on the current segment.
DATA
specifies that the Nomadic Disk Manager take all data segments. If the data
parameter is not included, the SEGMENT parameter is assumed.
ADDSQLVOL
do not use this parameter.
ADDVOLS
do not use this parameter.
LOCALTMF
do not use this parameter.
NOFIXUP
do not use this parameter.
NOSTART
do not use this parameter.
ONLY
specifies that only the named segment is to be taken, regardless of its type. This
parameter is intended only for emergencies.
TAKE [ SEGMENT segname | DATA ]
[ , ADDSQLVOL ]
[ , ADDVOLS ]
[ , LOCALTMF ]
[ , NOFIXUP ]...
[ , NOSTART ]
[ , ONLY ]
[ , UPPATH { -P|-B|-M|-MB|PRIMARY|MIRROR } ]