Owner's manual

Switch Command Interface (SWCI)
ServerNet Nomadic Disk User’s Guide—425485-001
6-18
STATUS Commands
Displaying Switch Module Environmental Information
The STATUS ENV command displays environmental information about the switch
module. This includes information about the power supply voltage, temperature readings
inside the module, and the position of the key switch on the SCC.
env-attr specifies one of these environmental attributes:
If
env-attr is not present, the STATUS ENV command displays all switch module
environmental information, including the power supply voltage, temperature, and key
switch information.
Examples
•
To retrieve general status information about the switch module:
SWCI $NDSWA.#TERM>STATUS ENV
SCM Environment: Power Temp 1 Temp 2 Keyswitch
------ ------ ------ ---------
5.70 V 35.7 C 35.9 C REMOTE
STATUS ENV [ , env-attr ]
POWER Displays only switch module power supply voltage.
TEMP Displays only switch module temperature sensor readings.
KEYSWITCH Displays only communications card key switch position.