Instruction Manual

Custom Views
OEM User’s Guide—520330-001
5-15
Working With Custom Views
The properties dialog box for the Custom View appears.
2. Configure the window layout:
•
To enable the toolbar, check the Toolbar check box in the Display panel.
To disable the toolbar, clear the Toolbar check box in the Display panel.
•
To enable the status bar, check the Status Bar check box in the Display panel.
To disable the status bar, clear the Status Bar check box in the Display panel.
•
To enable the links bar, check the Links Bar check box in the Display panel.
To disable the links bar, clear the Links Bar check box in the Display panel.
You can change the Links Bar setting only while in hierarchical display mode;
the links bar is automatically disabled when in object view display mode.
3. Click OK or Apply to save the change, or click Cancel to discard it.
Working With Custom Views
This subsection describes how to work with Custom Views and includes the following
sections:
•
Creating a New Custom View on page 5-16
•
Opening an Existing Custom View on page 5-16
•
Saving a Custom View Configuration on page 5-17
•
Sorting Custom View Window Items on page 5-17
•
Sizing Custom View Window Columns on page 5-17
•
Locking the Custom View Window on page 5-18
•
Keeping the Custom View Window on Top on page 5-18
•
Refreshing Custom View Window Contents on page 5-19
•
Navigating to Client Applications on page 5-19
•
Closing a Custom View Window on page 5-19
Note. As a shortcut, you can disable the links bar by dragging the divider located
between the links bar and the object list off the left side of the window.