Manual

If all checks are O
K then the component(s) activation should be OK, if not
then corrective (using the appropriate steps) action is required to satisfy the
checklist.
[Back to TOC]
8.3. General
If the PE status column is present but no data is displayed
 For the SIM Plug-in component check the following;
o Use Refresh PE from SIM menu: Configure -> NonStop Cluster
Essentials -> Refresh PE... to resync Performance Essentials with
SIM and Cluster Essentials.
o And use the checks for the NonStop and Linux agents to see that they
are running.
 For the NonStop Host Agent component check the following;
o Measure Subsystem (Meassubsys) needs to be running.
o License file (Licfile) within your Performance Essentials NonStop
subvolume needs to be populated with the correct license. License
version should match VPROC of HSCWRK.
o Files running needs to match file list from 4.2.4 (NonStop) Agents
Running.
 For the Linux Host Agent component check the following;
o License file (in the following location /var/www/html
/simagent-
0.1/license.dat) needs to be populated with the correct license. License
version should match Linux Host Agent version.
o Files running needs to match file list from 4.1.4 (Linux) Agents
Running.
If all checks are OK then the component(s) activation should be OK, if not
then corrective (using the appropriate steps) action is required to satisfy the
checklist.
Performance Essentials HP SIM Client and NonStop & Linux Host User Guide – 544813 – 004
76