User Manual

NonStop AutoTMF Software Commands
HP NonStop AutoTMF Software User’s Guide—429952-014
6-32
ALTER FILE
specifies whether TMF auditing is on. If NO is specified, auditing is off.
The audit mode is propagated to alternate key files.
AUDITCOMPRESS | NO AUDITCOMPRESS
specifies whether or not compression of audit records is occurring for this file.
BUFFERED | NO BUFFERED
specifies whether buffered writes are performed. If NO BUFFERED is
specified, writes are not buffered.
The default is buffered mode for audited files and not buffered for non audited
files.
CLEARONPURGE | NO CLEARONPURGE
erases disk free space when files are purged.
CODE file-code
numeric file code of the file. file-code is an integer between 0 and 65535.
Codes 100 to 999 are reserved for use by HP.
LOCKLENGTH key-length
the byte count of the record key for generic locks. key-length is between 0 and
the key length of the file.
MAXEXTENTS size
the maximum disk allocation extents. size is an integer between 16 and 978,
where the maximum value depends on the free space in the file label.
NOPURGEUNTIL [ ok-time-to-purge ]
date after which a PURGE of the file is allowed.
ok-time-to-purge is [ date ] time or [ time ] date,
where: time is hh:mm[:ss]
date is: dd mmm yyyy or mmm dd yyyy
(ex: 10:30:00 Jun 15 2008)
If ok-time-to-purge is omitted, the current time is used, thereby making the file
purgeable immediately.
OWNER group-num, user-num
the user ID of the owner of the files. For example: 100,004.
RESETBROKEN
resets BROKEN flag in the file label for non audited files.
SECURE "rwep"