HP ProBook User Guide - Windows XP

Initiating Standby
CAUTION: To reduce the risk of information loss, save your work before initiating Standby.
Press fn+f3 to initiate Standby.
When Standby is initiated, your information is stored in system memory, the screen is cleared, and power
is conserved. While the computer is in Standby, the power lights blink.
CAUTION: To reduce the risk of information loss, save your work before initiating Standby.
The computer must be on before you can initiate Standby.
NOTE: If a critical battery level occurs while the computer is in Standby, the computer initiates
Hibernation and the information stored in memory is saved to the hard drive. The factory setting for
critical battery action is Hibernate, but this setting can be changed in advanced power settings.
To exit Standby, briefly press the power button
The function of the fn+f3 hotkey can be changed. For example, you can set the fn+f3 hotkey to initiate
Hibernation instead of Standby.
NOTE: In all Windows operating system windows, references to the sleep button apply to the fn+f3
hotkey.
42 Chapter 3 Pointing devices and keyboard