Operation Manual

3. Insert the envelope print-side up and the long-edge ap on the left or the short-edge ap at the top.
NOTE: Do not load envelopes while the printer is printing.
4. Slide the paper-width guides till they t snugly against the sides of the envelope.
To load cards and photo paper
1. Open the top cover and lift the control panel.
2. Slide the two paper-width guides out as far as possible.
3. Insert the paper print-side up and slide the paper-width guides till they t snugly against the sides of
the paper.
NOTE: Do not load paper while the printer is printing.
Change or set paper settings
To change paper settings from the printer control panel
1. From the printer control panel, press the Home button ( ).
2. From the Home screen, select Setup and then press OK.
3. Select Printer Settings, and then pressOK.
4. Select Paper Settings, and then press OK.
5. Select the option for paper size or paper type, and then scroll down to select the size or type of the
paper loaded.
14 Chapter 2 Get started ENWW