HP Officejet 2620 All-in-One Series Get started 1. Follow the illustrations on the setup flyer to set up your printer. 2. Install software. Go to www.hp.com/ePrint/OJ2620, and then follow the on-screen instructions. If your computer is not connected to the Internet, insert the software CD in your computer. If the CD does not start, browse to Computer, double-click the CD/DVD drive icon with the HP logo, double-click setup.exe, and then follow the on-screen instructions.
Control Panel English 1 On button: Turns the printer on or off. 2 Home button: Returns you to the Home screen, where you can access the Copy, Fax, or Scan menu to make a copy, send a fax or change fax settings, or scan a document. 3 Up button: Use this button to navigate menus and select number of copies. 4 Down button: Use this button to navigate menus and select number of copies. 5 Keypad: Use the keypad to enter numbers and text. 6 Back button: Returns to the previous screen.
Basic Troubleshooting If you are unable to print: 1. Make sure the cable connections are secure by unplugging them completely and then plugging them back in. 2. Make sure the printer is powered on. The On button will be lit white. Windows Make sure that the printer is set as your default printing device: •• Windows 8: Point to or tap the upper-right corner of the screen to open the Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices and printers.
Set up fax You can set up fax using the software wizard (recommended) during the software installation or after installation using Fax Setup Wizard from the software (Windows) or Basic Fax Settings from HP Utility (OS X), or continue with the steps below. 1. If your country or region is listed below, visit www.hp.com/uk/faxconfig for setup information. Otherwise, follow the instructions in this guide.
Use fax Send a standard fax 1. Load your original print-side up in the Automatic Document Feeder (ADF) or print-side down on the right front corner of the scanner glass. 2. From the Home screen on the printer display, press the Up and Down buttons to select Fax, and then press OK. 3. Select Black Fax or Color Fax. Tip: To add a pause in the fax number, press * repeatedly, until a dash (-) appears on the display.
Use fax (continued) Receive a fax manually If you are on the phone with another person, you can receive faxes manually without hanging up the phone. 1. Make sure the printer is turned on and paper is loaded. 2. Remove any originals from the ADF. Note: Set Rings to Answer to a higher number to allow you time to answer the incoming call before the printer does. Or turn off Auto Answer so that the printer does not automatically answer incoming calls. English 3. Ask the sender to start sending the fax. 4.
If you still have problems using fax after successfully completing the fax test, follow the steps below: Cannot send but can receive faxes 1. Perform a copy or scan to ensure that the printer is working properly. 2. Check the physical fax connections. 3. Check if other fax devices can send to the same phone number. The receiving fax device might have blocked your phone number, or it might be having technical problems. 4.
HP printer limited warranty statement English HP product Duration of limited warranty Software Media 90 days Printer 1 year Print or Ink cartridges Until the HP ink is depleted or the “end of warranty” date printed on the cartridge has been reached, whichever occurs first. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with.
HP Officejet 2620 All-in-One Series Erste Schritte 1. Befolgen Sie die Einrichtungsanweisungen, um den Drucker zu konfigurieren. 2. Installieren Sie die Software. Windows® Rufen Sie www.hp.com/ePrint/OJ2620 auf und befolgen Sie die angezeigten Anweisungen. Wenn der Computer nicht mit dem Internet verbunden ist, legen Sie die Software-CD in den Computer ein. Wenn die CD nicht startet, navigieren Sie zu Computer, doppelklicken Sie auf das Symbol für das CD/DVD-Laufwerk mit dem HP Logo.
Bedienfeld Deutsch 1 2 3 4 5 6 7 8 9 Netztaste: Dient zum Ein-/Ausschalten des Druckers. Startanzeige (Schaltfläche): Ruft die Startanzeige auf. Hier können Sie die Menüs Kopieren, Faxen oder Scannen aufrufen, um Kopien zu erstellen, Faxe zu senden oder Faxeinstellungen zu ändern oder ein Dokument zu scannen. Nach oben (Schaltfläche): Diese Schaltfläche dient zum Navigieren in Menüs und zum Auswählen der Kopienanzahl.
Grundlegende Fehlerbehebung Wenn kein Drucken möglich ist: 1. Vergewissern Sie sich, dass die Kabel korrekt angeschlossen sind, indem Sie diese komplett entfernen und dann erneut anschließen. 2. Vergewissern Sie sich, dass der Drucker eingeschaltet ist und mit Strom versorgt wird. Die Netztaste (Ein) leuchtet weiß. Besuchen Sie die Website HP Diagnostic Tools unter www.hp.com/go/tools, um kostenlose Diagnoseprogramme (Tools) herunterzuladen, die zum Beheben allgemeiner Druckerprobleme dienen.
Faxeinrichtung Deutsch Sie können die Faxfunktion einrichten, indem Sie beim Installieren der Software den Softwareassistenten (empfohlen) verwenden. Sie können dazu aber auch nach dem Installieren den Faxeinrichtungsassistenten in der Software (Windows) oder im HP Dienstprogramm (OS X) die Option „Grundlegende Faxeinstellungen“ verwenden. Darüber hinaus können Sie auch mit den Schritten weiter unten fortfahren. 1. Wenn Ihr Land oder Ihre Region unten aufgeführt ist, finden Sie unter www.hp.
Verwenden der Faxfunktion Senden einer Standardfaxnachricht 1. Legen Sie das Original mit der bedruckten Seite nach oben in den automatischen Vorlageneinzug (ADF – Automatic Document Feeder) oder mit der bedruckten Seite nach unten an der vorderen rechten Ecke ausgerichtet auf das Scannerglas. 2. Drücken Sie auf dem Druckerdisplay in der Startanzeige die Schaltflächen Nach oben und Nach unten, um Fax auszuwählen. Drücken Sie dann OK. 3. Wählen Sie S/W-Fax oder Farbfax aus. 4.
Verwenden der Faxfunktion (Fortsetzung) Manuelles Empfangen einer Faxnachricht Wenn Sie mit einer anderen Person telefonieren, können Sie Faxe empfangen, ohne das Telefon auflegen zu müssen. 1. Stellen Sie sicher, dass der Drucker eingeschaltet und Papier eingelegt ist. 2. Nehmen Sie alle Originale aus dem ADF. Hinweis: Legen Sie für die Einstellung Signale bis Antwort einen höheren Wert fest, damit Sie den Anruf vor dem Drucker entgegennehmen können. Oder deaktivieren Sie die Einstellung Autom.
Sollten nach erfolgreicher Durchführung des Faxtests Probleme mit dem Faxen auftreten, gehen Sie wie folgt vor: Faxe können empfangen, aber nicht gesendet werden 1. Erstellen Sie eine Kopie oder einen Scan, um sicherzustellen, dass der Drucker korrekt funktioniert. 2. Überprüfen Sie die physischen Faxverbindungen. 3. Prüfen Sie, ob andere Faxgeräte Faxe an dieselbe Telefonnummer senden können. Das empfangende Faxgerät hat möglicherweise Ihre Telefonnummer blockiert oder es gibt ein technisches Problem. 4.
Erklärung zur beschränkten Gewährleistung für HP Drucker HP Produkt Dauer der beschränkten Gewährleistung Softwaremedien 90 Tage Drucker 1 Jahr Druckpatronen Bis die HP Tinte verbraucht oder das auf der Druckpatrone angegebene Enddatum für die Garantie erreicht ist, je nachdem, welcher Fall zuerst eintritt. Diese Garantie gilt nicht für nachgefüllte, nachgearbeitete, recycelte, zweckentfremdete oder in anderer Weise manipulierte HP Tintenprodukte.
HP Officejet All-in-One série 2620 Démarrage 1. Suivez les illustrations figurant sur le prospectus pour configurer votre imprimante. 2. Installez le logiciel. Windows® Allez sur www.hp.com/ePrint/OJ2620 et suivez les instructions à l'écran. Si votre ordinateur n'est pas connecté à Internet, insérez le CD du logiciel dans votre ordinateur. Si le CD ne s'exécute pas, allez dans Ordinateur, doublecliquez sur l'icône du lecteur CD/DVD à l'effigie du logo HP, double-cliquez ensuite sur setup.
Panneau de commande 1 2 3 Bouton Marche/Arrêt : permet d'allumer ou d'éteindre l'imprimante. Bouton Accueil : vous êtes redirigé vers l'écran d'accueil, où vous pouvez accéder au menu Copier, Télécopier ou Numériser pour faire une photocopie, envoyer un fax ou modifier les paramètres du télécopieur, ou numériser un document. Bouton Haut : permet de parcourir les menus et de sélectionner le nombre de copies. Français 4 Bouton Bas : permet de parcourir les menus et de sélectionner le nombre de copies.
Résolution des problèmes de base Si vous ne parvenez pas à imprimer : 1. Assurez-vous que les branchements de câble sont sûrs en les débranchant complètement et en les rebranchant. 2. Assurez-vous que l'imprimante est sous tension. Le bouton Marche/Arrêt s'allumera en blanc. Rendez-vous sur le site Internet Outils de diagnostic HP sur www.hp.com/go/tools pour télécharger les utilitaires (outils) de diagnostic gratuits que vous pouvez utiliser pour résoudre les problèmes d'impression.
Configuration du télécopieur Vous pouvez configurer le télécopieur à l'aide de l'assistant du logiciel (recommandé) pendant ou après l'installation du logiciel en utilisant l'Assistant de configuration du télécopieur à partir du logiciel (Windows) ou des Paramètres de base du télécopieur dans HP Utility (OS X), ou passer aux étapes suivantes. 1. Si votre pays ou votre région apparaît dans la liste ci-dessous, rendez-vous sur www.hp.com/uk/faxconfig pour en savoir plus sur la configuration.
Utilisation du télécopieur Envoi d'une télécopie standard 1. Vous pouvez charger votre original, face imprimée orientée vers le haut, dans le bac d'alimentation automatique, ou face imprimée vers le bas dans le coin avant droit de la vitre du scanner. 2. Sur l'écran de l'écran de l'imprimante, appuyez sur les boutons Haut et Bas pour sélectionner Télécopie, puis appuyez sur OK. 3. Sélectionnez Télécopie noir et blanc ou Télécopie couleur. 4.
Utilisation du télécopieur (suite) Réception manuelle d'une télécopie Si vous êtes au téléphone avec une autre personne, vous pouvez recevoir les télécopies manuellement sans raccrocher le téléphone. 1. Pour ce faire, assurez-vous que l'imprimante est sous tension et que le bac contient du papier. 2. Retirez tous les originaux du bac d'alimentation automatique.
Si vous rencontrez toujours des problèmes pour utiliser le télécopieur après avoir effectué le test de télécopie, suivez les étapes ci-dessous : Le télécopieur ne peut pas envoyer de télécopies mais peut en recevoir 1. Effectuez une copie ou une numérisation pour vous assurer que l'imprimante fonctionne correctement. 2. Vérifiez les connexions physiques du télécopieur. 3. Vérifiez si d'autres télécopieurs peuvent envoyer des télécopies au même numéro de téléphone.
Déclaration de garantie limitée de l'imprimante HP Produit HP Durée de la garantie limitée Supports logiciels 90 jours Imprimante 1 an Cartouches d'encre Jusqu'à épuisement de l'encre HP ou jusqu'à expiration de la date de garantie imprimée sur la cartouche (selon le cas qui se produira en premier). Cette garantie ne couvre pas les produits utilisant de l'encre HP qui ont été reconditionnés, mal utilisés ou altérés.
HP Officejet 2620 All-in-One Series Informazioni preliminari 1. Attenersi alle istruzioni riportate nel pieghevole di installazione per configurare la stampante. 2. Installare il software. Windows® Visitare www.hp.com/ePrint/OJ2620 e attenersi alle istruzioni a video. Se il computer non è connesso a Internet, inserire il CD del software nel computer. Se il CD non viene avviato, selezionare Computer, fare doppio clic sull'icona dell'unità CD/DVD con il logo HP, fare doppio clic su setup.
Pannello di controllo 1 2 3 4 5 6 7 8 9 Pulsante di accensione: consente di accendere o spegnere la stampante. Pulsante Pagina iniziale: consente di tornare alla schermata principale, in cui è possibile accedere al menu Copia, Fax o Scansione per effettuare una copia, inviare un fax, modificare le impostazioni fax o eseguire la scansione di un documento. Pulsante di spostamento in alto: pulsante utilizzato per esplorare i menu e selezionare il numero di copie.
Risoluzione dei problemi di base Se non è possibile stampare: 1. Assicurarsi che i cavi siano correttamente connessi, scollegandoli completamente e collegandoli nuovamente. 2. Assicurarsi che la stampante sia accesa. Il pulsante di accensione (On) deve essere acceso con una luce bianca. Visitare il sito Web HP Diagnostic Tools all’indirizzo www.hp.com/go/tools per scaricare utilità di diagnostica gratuite da utilizzare per risolvere i problemi comuni della stampante.
Impostazione del fax È possibile configurare il fax utilizzando la procedura guidata del software (scelta consigliata) durante l'installazione o in seguito all'installazione utilizzando la Configurazione guidata Fax del software (Windows) o Impostazioni fax di base da HP Utility (OS X). In alternativa, procedere con la procedura seguente. 1. Se il proprio paese o regione figura nell'elenco seguente, visitare il sito www.hp.com/uk/faxconfig per le informazioni di installazione.
Uso del fax Invio di un fax standard 1. Caricare gli originali con il lato di stampa verso l'alto nell'alimentatore automatico di documenti oppure con il lato di stampa verso il basso posizionandoli in corrispondenza dell'angolo anteriore destro del piano di scansione. 2. Nella schermata principale sul display della stampante, premere i pulsanti Su e Giù per selezionare Fax, quindi premere OK. 3. Selezionare Fax nero o Fax a colori. 4.
Uso del fax (continua) Ricezione manuale di un fax Se si è impegnati in una conversazione telefonica, è possibile ricevere i fax manualmente senza riagganciare. 1. Verificare che la stampante sia accesa e che la carta sia stata caricata. 2. Rimuovere tutti gli originali dall'ADF. Nota: impostare l'opzione Squilli prima di rispondere su un valore più elevato per consentire all'utente di rispondere alla chiamata in entrata prima che risponda la stampante.
Se i problemi con il fax persistono anche se il test del fax è risultato positivo, attenersi alle procedure seguenti. Controllo delle impostazioni fax della stampante 1. Eseguire una copia o una scansione per verificare il corretto funzionamento della stampante.
Dichiarazione di garanzia limitata della stampante HP Prodotto HP Durata della garanzia limitata Supporti del software 90 giorni Stampante 1 anno Cartucce di stampa o di inchiostro Fino ad esaurimento dell'inchiostro HP o fino al raggiungimento della data di "scadenza della garanzia" stampata sulla cartuccia, a seconda di quale evento si verifichi per primo.
HP Officejet 2620 All-in-One Series Primeros pasos 1. Siga las ilustraciones del folleto de configuración para configurar la impresora. 2. Instale el software. Visite www.hp.com/ePrint/OJ2620 y siga las instrucciones que aparecerán en la pantalla. Si el equipo no está conectado a Internet, inserte el CD de software en el equipo. Si el CD no se inicia, vaya a Equipo, haga doble clic en el icono de la unidad CD/DVD con el logo de HP, haga doble clic en setup.exe y siga las instrucciones en la pantalla.
Panel de control Español 1 2 3 4 5 6 7 8 9 Botón Encender: Enciende o apaga la impresora. Botón Inicio: Le devuelve a la pantalla Inicio, donde puede acceder al menú Copia, Fax o Escaneo para hacer una copia, enviar un fax o cambiar los ajustes de fax, o escanear un documento. Botón de desplazamiento hacia arriba: Utilice este botón para navegar por los menús y seleccionar el número de copias.
Solución de problemas básicos Si no puede imprimir: 1. Asegúrese de que los cables están conectados correctamente, desenchufándolos completamente y volviéndolos a enchufar. 2. Compruebe que la impresora esté encendida. El botón Encender estará encendido con luz blanca.
Configuración del fax Español Puede configurar el fax utilizando el asistente del software (recomendado) durante la instalación del mismo o después de la instalación utilizando el Asistente para la instalación del fax en el software (Windows) o Ajustes fundamentales de fax en HP Utility (OS X), o continuar con los pasos siguientes. 1. Si su país o región aparece en la siguiente lista, visite www.hp.com/uk/faxconfig para obtener información sobre la configuración.
Usar el fax Enviar un fax estándar 1. Cargue su original con la cara de impresión hacia arriba en el alimentador automático de documentos (ADF) o hacia abajo en la esquina frontal derecha del cristal del escáner. 2. En la pantalla Inicio del panel de la impresora, pulse los botones Arriba y Abajo para seleccionar Fax y después pulse Aceptar. 4. Introduzca el número de fax en el teclado numérico y pulse Aceptar.
Usar fax (continuación) Recibir un fax manualmente Si está al teléfono con otra persona, puede recibir faxes manualmente sin colgar el teléfono. 1. Asegúrese de que la impresora esté encendida y de que haya papel cargado. 2. Retire todos los originales del ADF. Español Nota: Establezca Timbres antes de responder en un número mayor para darle tiempo para responder a la llamada entrante antes de que lo haga la impresora.
Si sigue teniendo problemas para usar el fax después de haber completado la prueba del fax correctamente, realice los siguientes pasos: No puedo enviar faxes, pero sí recibirlos 1. Haga una copia o un escaneo para verificar el funcionamiento correcto de la impresora. 2. Compruebe las conexiones físicas del fax. 3. Compruebe si otros dispositivos de fax pueden enviar al mismo número de teléfono.
Declaración de garantía limitada de la impresora HP Producto HP Duración de la garantía limitada Medio de almacenamiento del software 90 días Impresora 1 año Cartuchos de tinta o impresión La garantía es válida hasta que se agote la tinta HP o hasta que se alcance la fecha de “fin de garantía” indicada en el cartucho, cualquiera de los hechos que se produzca en primer lugar.
HP Officejet 2620 All-in-One Series Primeiros passos 1. Siga as imagens do folheto de configuração para configurar a impressora. 2. Instale o software. Windows® Acesse www.hp.com/ePrint/OJ2620 e siga as instruções na tela. Se seu computador não estiver conectado à internet, insira o CD do software no computador. Se o CD não iniciar, navegue até Computador, clique duas vezes no ícone da unidade de CD/DVD com o logotipo HP e clique duas vezes em setup.exe. Siga as instruções na tela.
Painel de Controle Português 1 2 3 Botão Liga/Desliga: Liga ou desliga a impressora. Botão Início: Faz você retornar à tela Início, em que é possível acessar o menu Cópia, Fax ou Digitalizar, para fazer cópias, enviar um fax ou alterar as configurações de fax, ou digitalizar um documento. Botão Para cima: Use esse botão para navegar pelos menus e selecionar o número de cópias. 4 Botão Para baixo: Use esse botão para navegar pelos menus e selecionar o número de cópias.
Solução Básica de Problemas Se você não conseguir imprimir: 1. Certifique-se de que as conexões dos cabos estejam firmes desconectando-as completamente e conectando-as novamente. 2. Verifique se a impressora está ligada. O botão Liga/Desliga acenderá na cor branca. Confira o site das Ferramentas de Diagnóstico da HP em www.hp.com/go/tools para baixar gratuitamente utilitários (ferramentas) de diagnóstico que podem ser usados para corrigir problemas comuns da impressora.
Configurar fax É possível configurar o fax usando o assistente de software (recomendado) durante a instalação do software, ou após a instalação usando o Assistente de Configuração de Fax do software (Windows) ou as Configurações Básicas de Fax do Utilitário HP (OS X), ou prosseguir nas etapas abaixo. 1. Se seu país ou região estiver listado abaixo, visite www.hp.com/uk/faxconfig para obter informações de configuração. Caso contrário, siga as instruções deste manual.
Usar o fax Enviar um fax padrão 1. Carregue o original com o lado impresso voltado para cima no Alimentador Automático de Documentos (ADF) ou voltado para baixo no canto frontal direito do vidro do scanner. 2. Na tela Início do visor da impressora, pressione Para cima e Para baixo para selecionar Fax, e então pressione OK. 3. Selecione Fax Preto ou Fax Colorido. 4. Insira o número do fax usando o teclado numérico e pressione OK.
Usar o fax (continuação) Receber um fax manualmente Se você estiver no telefone com outra pessoa, será possível receber faxes manualmente sem desligar o telefone. 1. Verifique se a impressora está ligada e se há papel carregado. 2. Remova todos os originais do ADF. Observação: Defina Toques para Atender com um número mais alto para que você tenha tempo de atender à chamada recebida antes da impressora.
Se você ainda tiver problemas ao utilizar o fax após a conclusão bem-sucedida do teste de fax, siga as etapas abaixo: Não é possível enviar, mas é possível receber faxes 1. Faça uma cópia ou digitalização para ter certeza de que a impressora está funcionando corretamente. 2. Verifique as conexões físicas de fax. 3. Verifique se outros dispositivos de fax conseguem fazer o envio para o mesmo número de telefone.
Declaração de garantia limitada da impressora HP Produto HP Mídia de software Impressora Cartuchos de impressão ou de tinta Cabeças de impressão (aplicável somente aos produtos com cabeças de impressão substituíveis pelo cliente) Acessórios Duração da garantia limitada 90 dias 1 ano Até que a tinta HP acabe ou até a data do “fim da garantia” impressa no cartucho, o que ocorrer primeiro.
HP Officejet 2620 All-in-One Series Aan de slag 1. Volg de illustraties op de instelflyer om uw printer in te stellen. 2. Installeer de software. Windows® Ga naar www.hp.com/ePrint/OJ2620 en volg dan de instructies op het scherm. Als de computer niet met internet is verbonden, plaatst u de software-cd in uw computer. Als de cd niet start, bladert u naar Computer, dubbelklikt u op het cd-/dvd-station met het HP-logo, dubbelklikt u op setup.exe, en volgt u de instructies op het scherm.
Bedieningspaneel 1 2 3 4 Nederlands 5 6 7 8 9 Aan/Uit-knop: hiermee zet u de printer uit of aan. Beginscherm -knop: brengt u terug naar het startscherm, hier kunt u het menu Kopiëren, Faxen of Scannen openen om een kopie te maken, een fax te verzenden, de faxinstellingen aan te passen of een document te scannen. Knop Omhoog: Gebruik deze knop om door de menu's te bladeren en het aantal te maken kopieën in te stellen.
Basisproblemen oplossen Als u niet kunt afdrukken: 1. Controleer of de kabels goed zijn aangesloten door ze los te maken en daarna opnieuw te verbinden. 2. Controleer of de printer is ingeschakeld. De Aan-knop zal wit oplichten. Ga naar de website HP Diagnostic Tools op www.hp.com/go/tools om gratis diagnosehulpprogramma's (tools) te downloaden die u kunt gebruiken om gebruikelijke printerproblemen op te lossen.
De fax instellen U kunt de fax instellen door de installatiewizard (aanbevolen) te gebruiken tijdens het installeren van de software of u kunt de fax na de installatie instellen met de Faxinstallatiewizard van de software (Windows) of Basis Faxinstellingen van HP Utility (OS X), of de onderstaande stappen volgen. 1. Als uw land of regio hieronder wordt vermeld, kunt u de website www.hp.com/uk/faxconfig openen voor informatie over instellingen. Anders moet u de instructies in deze handleiding volgen.
Fax gebruiken Een standaardfax versturen 1. Voer uw oorspronkelijke document in met de afdrukzijde naar boven in de automatische documentinvoer (ADF) of met de afdrukzijde naar beneden in de rechterhoek van het glas van de scanner. 2. Druk in het Startscherm van het printerbeeldscherm op de toetsen Omhoog en Omlaag om Fax te selecteren en druk vervolgens op OK. 3. Selecteer Zwart-wit- fax of Kleurenfax. 4. Voer met behulp van het toetsenblok het faxnummer in en druk vervolgens op OK.
Fax gebruiken (vervolg) Een faxbericht handmatig ontvangen Als u in gesprek bent met een andere persoon, kunt u de faxen handmatig ontvangen zonder de telefoon op te hangen. 1. Controleer of de printer is ingeschakeld en of er papier in de lade aanwezig is. 2. Verwijder alle originelen uit de ADF. Opmerking: Stel Aantal beltonen voor antwoord in op een hoge waarde zodat u de binnenkomende oproepen kunt beantwoorden voordat de printer de oproep beantwoordt.
Als u nog steeds problemen ondervindt met uw fax nadat u de faxtest op pagina 5 hebt uitgevoerd, moet u de onderstaande procedure volgen: Kan geen faxen verzenden maar wel ontvangen 1. Voer een kopieeropdracht uit of maak een scan om na te gaan of de printer correct werkt. 2. Controleer de fysieke faxverbindingen. 3. Controleer of andere faxapparaten werken op hetzelfde telefoonnummer. Het ontvangende faxapparaat kan uw telefoonnummer hebben geblokkeerd of er zijn mogelijk technische problemen. 4.
Beperkte garantieverklaring voor de HP-printer HP-product Softwaremedia Printer Print- of inktcartridges Printkoppen (geldt alleen voor producten met printkoppen die door de klant kunnen worden vervangen) Accessoires Duur van beperkte garantie 90 dagen 1 jaar Tot het HP-cartridge leeg is of de "einde garantie"-datum (vermeld op de inktcartridge) is bereikt, afhankelijk van wat het eerst van toepassing is.