User Guide HP Officejet 6700
HP Officejet 6700 e-All-inOne series User Guide
Copyright information © 2014 Copyright Hewlett-Packard Development Company, L.P. Edition 2, 1/2014 Hewlett-Packard Company notices The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws.
Contents 1 Get started Accessibility................................................................................................................................9 Eco............................................................................................................................................10 Understand the printer parts.....................................................................................................11 Front view.........................................................
Print brochures.........................................................................................................................29 Print brochures (Windows).................................................................................................30 Print brochures (Mac OS X)................................................................................................30 Print on envelopes.........................................................................................................
Contents Receive a fax............................................................................................................................51 Receive a fax manually......................................................................................................51 Set up backup fax...............................................................................................................52 Reprint received faxes from memory.......................................................................
Use Web Services....................................................................................................................70 HP ePrint............................................................................................................................70 Print using HP ePrint....................................................................................................70 Find the printer’s email address...................................................................................
Contents Solve scan problems................................................................................................................97 Scanner did nothing............................................................................................................98 Scan takes too long............................................................................................................98 Part of the document did not scan or text is missing.........................................................
Printer specifications..............................................................................................................138 Physical specifications......................................................................................................138 Product features and capacities.......................................................................................138 Processor and memory specifications..............................................................................
Contents Environmental product stewardship program.........................................................................156 Paper use.........................................................................................................................156 Plastics.............................................................................................................................156 Material safety data sheets.......................................................................................
D E Network setup Set up the printer for wireless communication........................................................................195 Before you begin..............................................................................................................195 Set up the printer on your wireless network.....................................................................196 Set up the printer using the HP printer software (Recommended)...................................
1 Get started This guide provides details about how to use the printer and how to resolve problems.
Chapter 1 Eco Hewlett-Packard is committed to providing quality products in an environmentally sound manner. Design for recycling has been incorporated into this product. For more information, see Environmental product stewardship program. HP is committed to helping customers reduce their environmental footprint. HP has provided these features to help you focus on ways to assess and reduce the impact of your printing choices. For more information about HP's environmental initiatives, visit www.hp.
Understand the printer parts This section contains the following topics: • • • Front view Printing supplies area Back view Front view 1 Automatic document feeder (ADF) 2 Scanner glass 3 Output tray 4 Front universal serial bus (USB) port 5 Output tray extension 6 Input tray 7 Power button 8 Control panel display 9 Control panel 10 Document feeder tray 11 Width guides Printing supplies area Understand the printer parts 11
Chapter 1 1 Ink cartridge access door 2 Ink cartridges 3 Printhead NOTE: Printing supplies should be kept in the printer to prevent possible print quality issues or printhead damage. Avoid removing supplies for extended periods of time. Do not turn off the printer when a cartridge is missing.
Overview of buttons and lights The following diagrams and related tables provide a quick reference to the printer control panel features. Label Name and Description 1 Home button: Returns to the home screen from any other screen. 2 Control panel display: Touch the screen to select menu options. For information about the icons that appear on the display, see Control panel display icons. 3 Help button: Opens the Help menu. 4 Cancel button: Stops a job, exits a menu, or exits settings.
Chapter 1 (continued) Icon Purpose Displays a screen where you can make copies or select other options. Displays a screen where you can send a fax, or choose fax settings. Displays a screen where you can make a scan, or change scan settings. Displays a screen where you can use HP Apps. Displays a screen where you can adjust photo printing options. Displays the Setup screen for generating reports, changing fax and other maintenance settings, and accessing the Help screen.
To select a mode, touch (left arrow) or (right arrow) to see the available modes, and then touch the icon to select the desired mode. Follow the prompts on the control panel display to complete the job. The control panel display returns to the main menu when the job is finished. To select a different mode (Back button) to return to the main menu. Touch (left arrow) or (right Touch arrow) to scroll through the available modes, and then touch the icon to select the desired mode.
Chapter 1 HP Digital Fax (Fax to PC and Fax to Mac) Never lose important faxes misplaced within a stack of paper pages again! Use Fax to PC and Fax to Mac to automatically receive faxes and save faxes directly to your computer. With Fax to PC and Fax to Mac, you can store digital copies of your faxes easily and eliminate the hassle of dealing with bulky paper files. In addition, you can turn off fax printing altogether, saving money on paper and ink, and reduce paper consumption and waste.
(continued) It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. HP Printing Paper HP Printing Paper is a high-quality multifunction paper. It produces documents that look and feel more substantial than documents printed on standard multipurpose or copy paper. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors. HP Office Paper HP Office Paper is a high-quality multifunction paper.
Chapter 1 (continued) (4 x 6 inch), 13 x 18 cm (5 x 7 inch), and two finishes – glossy or softgloss (satin matte). It is acid-free for longer lasting documents. HP Advanced Photo Paper This thick photo paper features an instant-dry finish for easy handling without smudging. It resists water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to a store processed photo. It is available in several sizes, including A4, 8.
◦ ◦ Media that is too lightweight or stretches easily Media that contains staples or clips NOTE: To scan, copy, or fax documents that contain pages that do not conform to these guidelines, use the scanner glass. For more information, see Load an original on the scanner glass. Load an original on the scanner glass You can copy, scan, or fax originals by loading them on the scanner glass. NOTE: Many of the special features do not work correctly if the glass and lid backing are not clean.
Chapter 1 To load an original in the ADF Use these steps to load a document in the ADF. 1. Load your original print-side up into the ADF. a. If you are loading an original printed in portrait orientation, place the pages so that the top edge of the document goes in first. If you are loading an original printed in landscape orientation, place the pages so that the left edge of the document goes in first. b.
Load standard-size media To load standard-size media Use these instructions to load standard media. 1. 2. Lift the output tray. Slide the paper width guide out as far as possible. NOTE: If you are loading larger sized media, pull up the front edge of the input tray to extend it. 3. Insert the media print-side down in the tray. Make sure the stack of media is inserted as far inside the printer as possible and does not exceed the line marking in the tray.
Chapter 1 Load envelopes To load envelopes Use these instructions to load an envelope. 1. 2. Lift the output tray. Slide out the paper width guides in the input tray as far as possible. NOTE: If you are loading larger sized envelopes, pull up the front edge of the input tray to extend it. 3. Insert the envelopes print-side down and load according to the graphic. Make sure the stack of envelopes does not exceed the line marking in the tray. NOTE: Do not load envelopes while the printer is printing. 4.
Load cards and photo paper To load cards and photo paper Use these instructions to load photo paper. 1. 2. Lift the output tray. Slide out the paper width guide in the input tray as far as possible. NOTE: If you are loading larger sized media, pull up the front edge of the input tray to extend it. 3. Insert the media print-side down in the tray. Make sure the stack of media is inserted as far inside the printer as possible and does not exceed the line marking in the tray.
Chapter 1 3. Insert the media print-side down in the tray. Make sure the stack of media is inserted as far inside the printer as possible and does not exceed the line marking in the tray. NOTE: Do not load paper while the printer is printing. 4. 5. 6. Slide the media guides in the tray until they touch the edge of the stack of media. Lower the output tray. Pull out the tray extender. Insert a memory device Using the USB port on the front of the printer, you can connect a USB storage device.
Maintain the printer This section provides instructions for keeping the printer in top working condition. Perform these maintenance procedures as necessary. • • • Clean the scanner glass Clean the exterior Clean the automatic document feeder Clean the scanner glass NOTE: Dust or dirt on the scanner glass, scanner lid backing, or scanner frame can slow down performance, degrade the quality of scans, and affect the accuracy of special features such as fitting copies to a certain page size.
Chapter 1 Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the case. Keep fluids away from the interior of the printer, as well as from the printer control panel. Clean the automatic document feeder If the automatic document feeder picks up multiple pages or if it does not pick up plain paper, you can clean the rollers and separator pad.
To update the printer, complete the following steps: 1. 2. (HP ePrint), touch Settings, and then On the printer control panel, touch touch Product Updates. Touch Check for Product Update, and then follow the instructions on the display. TIP: To enable the printer to automatically check for updates, touch Settings, touch Product Updates, touch Auto Update, and then touch Automatically. Turn off the printer Turn the printer off by pressing (Power) button located on the printer.
2 Print Most print settings are automatically handled by the software application. Change the settings manually only when you want to change print quality, print on specific types of paper, or use special features. For more information about selecting the best print media for your documents, see Select print media.
Print documents (Windows) 1. 2. 3. 4. 5. 6. 7. Load paper in the tray. For more information, see Load media. On the File menu in your software application, click Print. Make sure the printer you want to use is selected. To change settings, click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.
Chapter 2 Print brochures (Windows) NOTE: To set print settings for all print jobs, make the changes in the HP software provided with the printer. For more information on the HP software, see Printer management tools. 1. 2. 3. 4. 5. 6. 7. Load paper in the tray. For more information, see Load media. On the File menu in your software application, click Print. Make sure the printer you want to use is selected. To change settings, click the button that opens the Properties dialog box.
• • Thick, irregular, or curled edges Areas that are wrinkled, torn, or otherwise damaged Make sure the folds of envelopes you load in the printer are sharply creased. NOTE: For more information about printing on envelopes, see the documentation available with the software program you are using. Follow the instructions for your operating system. • • Print on envelopes (Windows) Print on envelopes (Mac OS X) Print on envelopes (Windows) 1. 2. 3. 4. 5. 6. Load envelopes print-side down in the tray.
Chapter 2 6. Select the Orientation option. NOTE: If you do not see these options, click the disclosure triangle next to the Printer pop-up menu or click Show Details. 7. Select any other print settings that you want, and then click Print to begin printing. Print photos Do not leave unused photo paper in the input tray. The paper might start to curl, which could impair the quality of your printout. Photo paper should be flat before printing. Follow the instructions for your operating system.
Print photos on photo paper (Mac OS X) 1. 2. Load paper in the tray. For more information, see Load media. Select a paper size: a. From the File menu in your software application, click Page Setup. NOTE: If you do not see a Page Setup menu item, go to step 3. b. 3. 4. 5. 6. Make sure the printer you want to use is selected in the Format For pop-up menu. c. Select the paper size from the Paper Size pop-up menu, and then click OK. From the File menu in your software application, click Print.
Chapter 2 Follow the instructions for your operating system. • Print on special or custom-size paper (Mac OS X) Print on special or custom-size paper (Mac OS X) NOTE: Before you can print on custom-size paper, you must set up the custom size in the HP software provided with the printer. For instructions, see Set up custom sizes (Mac OS X). 1. 2. Load the appropriate paper in the tray. For more information, see Load media. Select a paper size: a.
Print borderless documents Borderless printing lets you print to the edges of certain photo media types and a range of standard media sizes. NOTE: You cannot print a borderless document if the paper type is set to Plain paper. NOTE: Before printing a borderless document, open the file in a software application and assign the image size. Make sure the size corresponds to the media size on which you are printing the image. NOTE: Not all applications support borderless printing.
Chapter 2 6. Click Paper Type/Quality from the pop-up menu, and then select the following settings: • Paper Type: The appropriate paper type • Quality: Best or Maximum dpi NOTE: If you do not see these options, click the disclosure triangle next to the Printer pop-up menu or click Show Details. 7. 8. 9. Make sure the Print Borderless check box is selected.
5. 6. Make sure the printer you want to use is selected. Select the paper size from the Paper Size pop-up menu (if available). NOTE: You might need to select the paper-size option labeled Two-Sided margins. 7. Click the Two-Sided Printing pop-up menu, select Print Both Sides, and then click the appropriate binding options for the document. - OR Click the Layout pop-up menu, and then select the appropriate binding options for the document from the Two-Sided pop-up menu.
3 Scan You can use the printer’s control panel to scan documents, photos, and other originals and send them to a variety of destinations, such as a folder on a computer. You can also scan these originals from your computer using either the HP software provided with the printer or TWAIN-compliant or WIA-compliant programs. When scanning documents, you can use the HP software to scan documents into a format that you can search, copy, paste, and edit.
Use these steps to scan from the control panel. 1. 2. 3. 4. Load your original print-side down in the right-front corner of the glass or in the ADF. For more information, see Load an original on the scanner glass or Load an original in the automatic document feeder (ADF). Touch Scan, and then select Computer. Make changes to scan options, if needed. Touch Start Scan. To scan an original from HP scanning software 1. Load your original print-side down in the right-front corner of the glass or in the ADF.
Chapter 3 Scan using Webscan Webscan is a feature of the embedded web server that lets you scan photos and documents from your printer to your computer using a web browser. This feature is available even if you did not install the printer software on your computer. NOTE: If you are unable to open Webscan in the EWS, your network administrator might have turned it off. For more information, contact your network administrator or the person who set up your network.
3. Select the type of editable text you want to use in the scan: I want to... Follow these steps Extract just the text, without any of the formatting of the original Select the Save as Editable Text (OCR) shortcut from the list, and then select Text (.txt) from the File Type drop-down menu. Extract the text, as well as some of the formatting of the original Select the Save as Editable Text (OCR) shortcut from the list, and then select Rich Text (.rtf) from the File Type drop-down menu.
Chapter 3 Guidelines for scanning documents as editable text To ensure that the software can convert your documents successfully, do the following: • • • • • 42 Scan Make sure the scanner glass or ADF window is clean. When the printer scans the document, smudges or dust on the scanner glass or ADF window can be scanned, as well, and can prevent the software from converting the document to editable text. Make sure the document is loaded correctly.
4 Copy You can produce high-quality color and grayscale copies on a variety of paper types and sizes. NOTE: If you are copying a document when a fax arrives, the fax is stored in the printer's memory until the copying finishes. This can reduce the number of fax pages stored in memory. This section contains the following topics: • • Copy documents Change copy settings Copy documents You can make quality copies from the printer control panel. To copy documents 1.
Chapter 4 You can use these settings for single copy jobs, or you can save settings to be used as defaults for future jobs. To change copy settings for a single job 1. Touch Copy. 2. Select the copy function settings you want to change. 3. Touch Start Black or Start Color. To save the current settings as defaults for future jobs 1. Touch Copy. 2. Make any changes to the copy function settings, and then touch Settings. 3. Touch (down arrow), and then select Set As New Defaults. 4.
5 Fax You can use the printer to send and receive faxes, including color faxes. You can schedule faxes to be sent at a later time and set up speed-dials to send faxes quickly and easily to frequently used numbers. From the printer control panel, you can also set a number of fax options, such as resolution and the contrast between lightness and darkness on the faxes you send. NOTE: Before you begin faxing, make sure you have set up the printer correctly for faxing.
Chapter 5 TIP: You can also send a fax manually from a phone or by using monitor dialing. These features allow you to control the pace of your dialing. They are also useful when you want to use a calling card to charge the call and you have to respond to tone prompts while dialing. To send a standard fax from the printer control panel 1. Load your original print-side down in the right-front corner of the glass or in the ADF.
Mac OS X 1. Open the document on your computer that you want to fax. 2. From the File menu in your software application, click Print. 3. Select the printer that has “(Fax)” in the name. 4. Select Fax Recipients from the pop-up menu below the Orientation setting. NOTE: If you cannot find the pop-up menu, try clicking the disclosure triangle next to the Printer selection. 5. 6. Enter the fax number and other information in the boxes provided, and then click Add to Recipients.
Chapter 5 4. If the recipient answers the telephone, you can engage in a conversation before sending your fax. NOTE: If a fax machine answers the call, you will hear fax tones from the receiving fax machine. Proceed to the next step to transmit the fax. 5. When you are ready to send the fax, touch Start Black or Start Color. NOTE: If prompted, select Send Fax.
Send a fax from memory You can scan a black-and-white fax into memory and then send the fax from memory. This feature is useful if the fax number you are trying to reach is busy or temporarily unavailable. The printer scans the originals into memory and sends them once it is able to connect to the receiving fax machine. After the printer scans the pages into memory, you can immediately remove the originals from the document feeder tray or scanner glass.
Chapter 5 To cancel a scheduled fax 1. Touch the Send Fax Later message on the display. – OR – Touch Fax, and then select Fax Options or Fax Settings. 2. Touch Cancel Scheduled Fax. Send a fax to multiple recipients You can send a fax to multiple recipients at once by grouping individual speed dial entries into group speed dial entries. To send a fax to multiple recipients using group speed dial 1. Load your originals.
Receive a fax You can receive faxes automatically or manually. If you turn off the Auto Answer option, you must receive faxes manually. If you turn on the Auto Answer option (the default setting), the printer automatically answers incoming calls and receives faxes after the number of rings that are specified by the Rings to Answer setting. (The default Rings to Answer setting is five rings.
Chapter 5 4. If you are currently on the phone with the sender, instruct the sender to press Start on their fax machine. When you hear fax tones from a sending fax machine, do the following: a. Touch Fax, and then select Start Black or Start Color. b. After the printer begins to receive the fax, you can hang up the phone or remain on the line. The phone line is silent during fax transmission. 5.
NOTE: After the memory becomes full, the oldest, printed faxes are overwritten as new faxes are received. If all the stored faxes are unprinted, the printer does not receive any fax calls until you print or delete the faxes from memory. You might also want to delete the faxes in memory for security or privacy purposes. Depending on the sizes of the faxes in memory, you can reprint up to eight of the most recently printed faxes, if they are still in memory.
Chapter 5 4. Touch On (Print and Forward) to print and forward the fax, or select On (Forward) to forward the fax. NOTE: If the printer is not able to forward the fax to the designated fax machine (for example, if it is not turned on), the printer prints the fax. If you set up the printer to print error reports for received faxes, it also prints an error report. 5. 6. At the prompt, enter the number of the fax machine intended to receive the forwarded faxes, and then touch Done.
When an incoming fax call is received, the printer compares the number to the list of junk fax numbers to determine if the call should be blocked. If the number matches a number in the blocked fax numbers list, the fax is not printed. (The maximum number of fax numbers you can block varies by model.) NOTE: This feature is not supported in all countries/regions. If it is not supported in your country/region, Junk Fax Blocker does not appear in the Fax Options or Fax Settings menu.
Chapter 5 Print a Junk Fax Report Use the following procedure to print a list of blocked junk fax numbers. To print a Junk Fax Report 1. Touch (right arrow), and then touch Setup. 2. Touch Fax Setup, and then touch Basic Fax Setup. 3. Touch Junk Fax Blocker. 4. Touch Print Reports, and then touch Junk Fax List.
Activate Fax to PC and Fax to Mac On a computer running Windows, you can use the Digital Fax Setup Wizard to activate Fax to PC. On a Macintosh computer, you can use the HP Utility. To set up Fax to PC (Windows) 1. From the computer desktop, click Start, select Programs or All Programs, select the folder for your HP printer, and then select the option for your HP printer. 2. Double-click Fax Actions, and then double-click Digital Fax Setup Wizard. 3. Follow the on-screen instructions.
Chapter 5 To modify settings from the HP software (Mac OS X) 1. Open HP Utility. For more information, see HP Utility (Mac OS X). 2. Click the Applications icon on the HP Utility toolbar. 3. Double-click HP Setup Assistant, and then follow the on-screen instructions. Turn off Fax to PC or Fax to Mac 1. Touch (right arrow), and then touch Setup. 2. Touch Fax Setup, touch Basic Fax Setup, and then touch Fax to PC. 3. Touch Turn Off.
4. If you want to change the fax number, type the new number, and then touch Next. NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix. 5. If you want to change the name of the speed-dial entry, type the new name, and then touch Done. Set up and change group speed-dial entries You can store groups of fax numbers as group speed-dial entries.
Chapter 5 Print a list of speed-dial entries To print a list of all of the speed-dial entries that have been set up, complete the following steps: 1. 2. 3. 4. Load paper in the tray. For more information, see Load media. On the printer’s control panel, touch (right arrow), and then touch Setup. Touch Fax Setup, and then touch Speed Dial Setup. Touch Print Speed Dial List.
To set the answer mode 1. Touch (right arrow), and then touch Setup. 2. Touch Fax Setup, and then touch Basic Fax Setup. 3. Touch Auto Answer, and then select On or Off. Set the number of rings before answering If you turn on the Auto Answer setting, you can specify how many rings occur before incoming calls are automatically answered.
Chapter 5 To change the answer ring pattern for distinctive ring 1. Verify that the printer is set to answer fax calls automatically. 2. Touch (right arrow), and then touch Setup. 3. Touch Fax Setup, and then select Advanced Fax Setup. 4. Touch Distinctive Ring. 5. A message appears stating that this setting should not be changed unless you have multiple numbers on the same telephone line. Touch Yes to continue. 6.
To set the redial options 1. Touch (right arrow), and then touch Setup. 2. Touch Fax Setup, and then touch Advanced Fax Setup. 3. Touch Busy Redial or No Answer Redial, and then select the appropriate options. Set the fax speed You can set the fax speed used to communicate between your printer and other fax machines when sending and receiving faxes.
Chapter 5 Fax and digital phone services Many telephone companies provide their customers with digital phone services, such as the following: • • • • DSL: A Digital subscriber line (DSL) service through your telephone company. (DSL might be called ADSL in your country/region.) PBX: A private branch exchange (PBX) phone system. ISDN: An integrated services digital network (ISDN) system. FoIP: A low-cost phone service that allows you to send and receive faxes with your printer by using the Internet.
Use reports You can set up the printer to print error reports and confirmation reports automatically for each fax you send and receive. You can also manually print system reports as required; these reports provide useful system information about the printer. By default, the printer is set to print a report only if there is a problem sending or receiving a fax. A confirmation message that indicates whether a fax was successfully sent appears briefly on the control panel display after each transaction.
Chapter 5 3. 4. Touch Fax Confirmation. Touch to select one of the following options. Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the default setting. On (Fax Send) Prints a fax confirmation report for every fax you send. On (Fax Receive) Prints a fax confirmation report for every fax you receive. On (Send and Receive) Prints a fax confirmation report for every fax you send and receive. To include an image of the fax on the report 1.
NOTE: Clearing the fax log also deletes all faxes stored in memory. To clear the fax log 1. Touch (right arrow), and then touch Setup. 2. Do one of the following: • Touch Tools. - Or • Touch Fax Setup, and then touch Fax Tools. 3. Touch Clear Fax Log. Print the details of the last fax transaction The Last Fax Transaction report prints the details of the last fax transaction to occur. Details include the fax number, number of pages, and the fax status. To print the Last Fax Transaction report 1.
6 Web Services The printer offers innovative, web-enabled solutions that can help you quickly access the Internet, obtain documents, and print them faster and with less hassle—and all without using a computer. NOTE: To use these web features, the printer must be connected to the Internet (either using an Ethernet cable or wireless connection). You cannot use these web features if the printer is connected using a USB cable.
Set up Web Services To set up Web Services, complete the following steps. NOTE: Before you set up Web Services, make sure you are connected to the Internet using either a wired (Ethernet) or wireless connection. Set up Web Services using the HP printer software In addition to enabling key printer features, you can use the HP printer software that came with your printer to set up Web Services.
Chapter 6 5. 6. If your network uses proxy settings when connecting to the Internet, enter these settings: a. Touch Enter Proxy. b. Enter the proxy server settings, and then touch Done. Follow the instructions on the Web Services information sheet to finish the setup. Set up Web Services using the embedded web server You can use the printer’s embedded web server (EWS) to set up and manage Web Services. To set up Web Services, complete the following steps: 1. 2. 3. 4. 5. 6. Open the EWS.
NOTE: Make sure that the printer’s email address is the only address listed in the “To” line of the email message. If other email addresses are listed in the “To” line, the attachments you are sending might not print. Find the printer’s email address To display your printer’s HP ePrint email address, complete the following steps: From the Home screen, touch (HP ePrint). The email address for the printer appears on the display. TIP: To print the email address, touch Print.
Chapter 6 NOTE: To remove all Web Services, see Remove Web Services. Remove Web Services To remove Web Services, complete the following steps: 1. 2. 72 On the printer’s control panel display, touch Settings. Touch Remove Web Services.
7 Work with ink cartridges To ensure the best print quality from the printer, you need to perform some simple maintenance procedures. This section provides guidelines for handling the ink cartridges, instructions for replacing the ink cartridges, and aligning and cleaning the printhead. TIP: If you have problems copying documents, see Print quality troubleshooting.
Chapter 7 Check the estimated ink levels You can check the estimated ink levels from the printer software or from the printer control panel. For information about using these tools, see Printer management tools and Use the printer control panel. You can also print the Printer Status page to view this information (see Understand the Printer Status Report). NOTE: Ink level alerts and indicators provide estimates for planning purposes only.
Replace the ink cartridges NOTE: For information on recycling used ink supplies, see HP inkjet supplies recycling program. If you do not already have replacement ink cartridges for the printer, see HP supplies and accessories. NOTE: At this time, some portions of the HP web site are available in English only. NOTE: Not all cartridges are available in all countries/regions.
Chapter 7 Make sure that you insert the ink cartridge into the slot that has the same colored letter as the color you are installing. 6. 7. Repeat steps 3 through 5 for each ink cartridge you are replacing. Close the print-carriage access door. Related topics HP supplies and accessories Store printing supplies Ink cartridges can be left in the printer for extended periods of time. However, to assure optimal ink cartridge health, be sure to turn off the printer properly.
If you are concerned about providing this anonymous information, you can make this information inaccessible by turning off the memory chip's ability to collect the printer's usage information: To turn off usage information collection 1. On the printer control panel, touch (right arrow), and then touch Setup. 2. Select Preferences, and then touch Cartridge Chip Information. 3. Touch OK to turn off usage information collection.
8 Solve a problem The information in this section suggests solutions to common problems. If your printer is not operating correctly and these suggestions did not solve your problem, try using one of the following support services to obtain assistance.
Obtain electronic support To find support and warranty information, go to the HP web site at www.hp.com/go/ customercare. This website provides information and utilities that can help you correct many common printer problems. If prompted, select your country/region, and then click Contact HP for information about calling for technical support. This web site also offers technical support, drivers, supplies, ordering information and other options such as: • • • • Access online support pages.
Chapter 8 • • Messages that appear when the situation occurs Answers to these questions: ◦ Has this situation happened before? ◦ Can you re-create it? ◦ Did you add any new hardware or software to your computer at about the time that this situation began? ◦ Did anything else occur prior to this situation (such as a thunderstorm or moving the printer)? Phone support period One year of phone support is available in North America, Asia Pacific, and Latin America (including Mexico).
For the most current list of telephone support numbers, see www.hp.com/go/ customercare. This website provides information and utilities that can help you correct many common printer problems.
Chapter 8 After the phone support period After the phone support period, help is available from HP at an additional cost. Help may also be available at the HP online support web site: www.hp.com/go/ customercare. This website provides information and utilities that can help you correct many common printer problems. Contact your HP dealer or call the support phone number for your country/region to learn more about support options.
• • • Blank or partial page printed Something on the page is missing or incorrect Placement of the text or graphics is wrong The printer shuts down unexpectedly Check the power and power connections Make sure the printer's power cord is connected firmly to a functioning power outlet. For voltage requirements, see Electrical specifications. The printer is making some unexpected noises You might hear some unexpected noises made by the printer.
Chapter 8 installed correctly. To resolve this, uninstall the HP software completely, and then reinstall the HP software. For more information, see Uninstall and reinstall the HP software. Check the cable connections • Make sure both ends of the USB cable or Ethernet cable are secure. • If the printer is connected to a network, check the following: ◦ Check the Link light on the back of the printer. ◦ Make sure you are not using a phone cord to connect the printer.
For more information, see: Check the estimated ink levels Cause: The ink cartridges might have insufficient ink. If this did not solve the issue, try the next solution. Solution 3: Contact HP support Solution: Contact HP support for service. Go to: www.hp.com/go/customercare. This website provides information and utilities that can help you correct many common printer problems. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Chapter 8 Check the margin settings Make sure the margin settings for the document do not exceed the printable area of the printer. For more information, see Set minimum margins. Check the color print settings Make sure Print in Grayscale is not selected in the printer driver. Check the printer location and length of USB cable High electromagnetic fields (such as those generated by USB cables) can sometimes cause slight distortions to printouts.
TIP: If you are using a computer running Windows, you can visit the HP online support website at www.hp.com/go/customercare. This website provides information and utilities that can help you correct many common printer problems. Print quality troubleshooting Try the solutions in this section to resolve print quality problems in your printout.
Chapter 8 NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When you receive a low-ink alert, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the ink cartridges until prompted to do so. CAUTION: While ink cartridges are not damaged when left outside of the printer, the printhead does need to have all cartridges installed at all times after the printer is set up and in use.
paper you plan to use immediately. When you have finished printing, return any unused photo paper to the plastic bag. This prevents the photo paper from curling. NOTE: For this issue, there is not a problem with your ink supplies. Therefore, replacing the ink cartridges is not necessary. For more information, see: Select print media Cause: The wrong kind of paper was loaded in the input tray. If this did not solve the issue, try the next solution.
Chapter 8 If defects are seen on the Print Quality Diagnostic report, follow the steps below: 1. 2. 3. If the lines in Test Pattern 1 are not straight and connected, align the printer. For more information, see Align the printhead. If you see white lines in any of the color blocks in Test Pattern 2, clean the printhead. For more information, see Clean the printhead. If you see white or dark lines where the arrows are pointing in Test Pattern 3, align the printer.
TIP: If you are using a computer running Windows, you can visit the HP online support website at www.hp.com/go/customercare. This website provides information and utilities that can help you correct many common printer problems. Cause: There was a problem with the printhead. Printhead maintenance If you are experiencing problems with printing, you might have a problem with the printhead.
Chapter 8 3. 4. From the Device Services tab, click the icon to the left of Clean Printheads. Follow the onscreen instructions. To clean the printhead from HP Utility (Mac OS X) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size media. 2. Open HP Utility. For more information, see HP Utility (Mac OS X). 3. In the Information And Support section, click Clean Printheads. 4. Click Clean, and then follow the onscreen instructions.
To align the printhead from the embedded web server (EWS) 1. Load Letter, A4, or Legal unused plain white paper into the main input tray. For more information, see Load standard-size media. 2. Open the EWS. For more information, see To open the embedded web server. 3. Click the Tools tab, and then click Print Quality Toolbox in the Utilities section. 4. Click Align Printhead and follow the onscreen instructions. Solve paper-feed problems TIP: You can visit the HP online support website at www.hp.
Chapter 8 Pages are skewing • Make sure the media loaded in the trays is aligned to the paper guides. If needed, pull out the trays from the printer and reload the media correctly, making sure that the paper guides are aligned correctly. • Load media into the printer only when it is not printing. • Remove and replace the automatic two-sided printing accessory (duplexer). ◦ Push the button on either side of the duplexer, and then remove the unit. ◦ Reinsert the duplexer into the printer.
No copy came out • • • Check the power Make sure that the power cord is securely connected, and the printer turned on. Check the status of the printer ◦ The printer might be busy with another job. Check the control panel display for information about the status of jobs. Wait for any job that is processing to finish. ◦ The printer might be jammed. Check for jams. See Clear jams. Check the trays Make sure that media is loaded. For more information, see Load media.
Chapter 8 Size is reduced • • The reduce/enlarge or other copy feature might have been set from the printer control panel to reduce the scanned image. Check the settings for the copy job to make sure that they are for normal size. The HP software settings might be set to reduce the scanned image. Change the settings, if needed. For more information, see the onscreen Help for the HP software. Copy quality is poor • • • Take steps to improve the copy quality ◦ Use quality originals.
• • • • Unclear text ◦ Try adjusting the contrast and copy-quality settings. ◦ The default enhancement setting might not be suitable for the job. Check the setting and change it to enhance text or photographs, if needed. For more information, see Change copy settings. Incompletely filled text or graphics Try adjusting the contrast and copy-quality settings. Large, black typefaces look splotchy (not smooth) The default enhancement setting might not be suitable for the job.
Chapter 8 Scanner did nothing • • • Check the original Make sure that the original is loaded correctly. For more information, see Load an original on the scanner glass or Load an original in the automatic document feeder (ADF). Check the printer The printer might be coming out of Sleep mode after a period of inactivity, which delays processing a short while. Wait until the printer displays the Home screen.
Text cannot be edited • • Make sure that the OCR has been installed: ◦ Make sure that the OCR has been installed: Windows: On the computer desktop, click Start, select Programs or All Programs, click HP, select your printer name, and then click Printer Setup & Software. Click Add More Software, click Customize Software Selections, and make sure the OCR option is selected. Mac OS X: If you have installed the HP software using the Minimum installation option, the OCR software might not have been installed.
Chapter 8 Error messages appear • • Unable to activate TWAIN source or An error occurred while acquiring the image ◦ If you are acquiring an image from another device, such as another scanner, make sure that the other device is TWAIN-compliant. Devices that are not TWAIN-compliant do not work with the HP software provided with the printer. ◦ If you are using a USB connection, make sure that you have connected the USB Device Cable to the correct port on the back of your computer.
The scanned image shows blots, lines, vertical white stripes, or other defects ◦ If the scanner glass is dirty, the image produced does not have optimum clarity. See Maintain the printer for cleaning instructions. ◦ The defects might be on the original and are not a result of the scanning process. Graphics look different from the original Scan at a higher resolution. NOTE: Scanning at high resolution can take a long time, and it can take up a large amount of space on your computer.
Chapter 8 • • Unclear text Try adjusting the settings. Make sure that the resolution and color settings are correct. Size is reduced The HP software settings might be set to reduce the scanned image. See the HP printer software Help for more information about changing the settings. Solve fax problems This section contains fax setup troubleshooting information for the printer. If the printer is not set up correctly for faxing, you might experience problems when sending faxes, receiving faxes, or both.
The "Fax Hardware Test" failed Solution: • Turn the printer off by pressing the • • • • (Power) button located on the printer control panel and then unplug the power cord from the back of the printer. After a few seconds, plug the power cord in again, and then turn the power on. Run the test again. If the test fails again, continue reviewing the troubleshooting information in this section. Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be a problem.
Chapter 8 • • Try connecting a working phone and phone cord to the telephone wall jack that you are using for the printer and check for a dial tone. If you do not hear a dial tone, contact your telephone company and have them check the line. Try to send or receive a test fax. If you can send or receive a fax successfully, there might not be a problem. After you resolve any problems found, run the fax test again to make sure it passes and the printer is ready for faxing.
• • Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you plug in the phone cord that came with the printer, run the fax test again. If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.
Chapter 8 • • Make sure you use the phone cord that came with the printer. If you do not use the supplied phone cord to connect from the telephone wall jack to the printer, you might not be able to send or receive faxes. After you plug in the phone cord that came with the printer, run the fax test again. If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that plugs into a telephone wall jack.
continues to fail, contact your telephone company and have them check the phone line. The "Fax Line Condition" test failed Solution: • Make sure you connect the printer to an analog phone line or you cannot send or receive faxes. To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do not hear a normal sounding dial tone, it might be a phone line set up for digital phones.
Chapter 8 cord, which can be a standard phone cord that you might already have in your home or office. Solution: Other equipment that uses the same phone line as the printer might be in use. Make sure extension phones (phones on the same phone line, but not connected to the printer) or other equipment are not in use or off the hook. For example, you cannot use the printer for faxing if an extension phone is off the hook, or if you are using a computer dial-up modem to send email or access the Internet.
connected to the port labeled 1-LINE on the back of the printer and the other end to your telephone wall jack, as shown in the illustration. • • • • • 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the "1LINE" port If the phone cord that came with the printer is not long enough, you can use a coupler to extend the length. You can purchase a coupler at an electronics store that carries phone accessories.
Chapter 8 • • • Make sure the printer is not connected to a telephone wall jack that is set up for digital phones. To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do not hear a normal sounding dial tone, it might be a phone line set up for digital phones.
• • Make sure the telephone you use to initiate the fax call is connected directly to the printer. To send a fax manually, the telephone must be connected directly to the port labeled 2-EXT on the printer, as shown in the illustration.
Chapter 8 • If you have an answering machine on the same phone line with the printer, you might have one of the following problems: ◦ Your answering machine might not be set up correctly with the printer. ◦ Your outgoing message might be too long or too loud to allow the printer to detect fax tones, and the sending fax machine might disconnect. ◦ Your answering machine might not have enough quiet time after your outgoing message to allow the printer to detect fax tones.
• • If the printer shares the same phone line with other types of phone equipment, such as an answering machine, a computer dial-up modem, or a multi-port switch box, the fax signal level might be reduced. The signal level can also be reduced if you use a splitter or connect extra cables to extend the length of your phone. A reduced fax signal can cause problems during fax reception.
Chapter 8 Fax tones are recorded on my answering machine Solution: • When you have an answering machine on the same phone line you use for fax calls, try connecting the answering machine directly to the printer as described in Case I: Shared voice/fax line with answering machine. If you do not connect the answering machine as recommended, fax tones might be recorded on your answering machine. • Make sure the printer is set to receive faxes automatically and that the Rings to Answer setting is correct.
The computer cannot receive faxes (Fax to PC and Fax to Mac) Cause: The computer selected to receive faxes is turned off. Solution: Make sure the computer selected to receive faxes is switched on at all times. Cause: Different computers are configured for setup and receiving faxes and one of them may be switched off. Solution: If the computer receiving faxes is different from the one used for setup, both computers should be switched on at all times.
Chapter 8 • • If you are using HP ePrint, check the following: ◦ Make sure the printer’s email address is correct. ◦ Make sure that the printer’s email address is the only address listed in the “To” line of the email message. If other email addresses are listed in the “To” line, the attachments you are sending might not print. ◦ Make sure you are sending documents that meet the HP ePrint requirements. For more information, see Web Services specifications.
The printer cannot read the memory device • • Check the memory device ◦ Make sure that the memory device is one of the supported types. For more information, see Memory device specifications. ◦ Some memory devices have a switch that controls how they can be used. Make sure that the switch is set so that the memory device can be read. ◦ Inspect the ends of the memory device for dirt or material that closes a hole or spoils a metal contact.
Chapter 8 • • All applications, including virus protection programs, spyware protection programs, and firewalls, are closed or disabled for computers running Windows. The printer is installed on the same subnet as the computers that use the printer. If the installation program cannot discover the printer, print the network configuration page, and enter the IP address manually in the installation program. For more information, see Understand the network configuration page.
To print a Wireless Test Report, touch (right arrow), touch Setup, touch Network, and then select Print Wireless Network Test. If a problem is detected, the printed test report includes recommendations that might help solve the problem. TIP: If the Wireless Network Test indicates the signal is weak, try moving the printer closer to the wireless router.
Chapter 8 To check a wireless connection 1. Make sure that your computer's wireless has been turned on. For more information, see the documentation that came with your computer. 2. If you are not using a unique network name (SSID), then it is possible that your wireless computer could be connected to a nearby network that is not yours. The following steps can help you determine if your computer is connected to your network. Windows a.
A: Make sure the printer is on the network 1. If the printer supports Ethernet networking and is connected to an Ethernet network, make sure an Ethernet cable is not plugged into the back of the printer. If an Ethernet cable is plugged into the back, then wireless connectivity is disabled. 2. If the printer is connected to a wireless network, print the network configuration page. For more information, see Understand the network configuration page. 3.
Chapter 8 communicate with each other over the network. For more information, see Configure your firewall software to work with the printer. If you are able to access the EWS, but are still unable to use the printer even with the firewall turned off, try enabling the firewall software to recognize the printer. For more information, see the documentation provided with your firewall software.
you have difficulties printing or connecting to the printer, make sure the correct version of the printer driver is set as the default. 1. 2. 3. Click Start, and then click Printers or Printers and Faxes or Devices and Printers. - Or Click Start, click Control Panel, and then double-click Printers. Determine if the version of the printer driver in the Printers or Printers and Faxes or Devices and Printers folder is connected wirelessly: a.
Chapter 8 Mac OS X 1. Open HP Utility. For more information, see HP Utility (Mac OS X). 2. Click the Applications icon on the toolbar, double-click HP Setup Assistant, and then follow the onscreen instructions. Configure your firewall software to work with the printer A personal firewall, which is security software running on your computer, can block network communication between your printer and your computer.
NOTE: At this time, some portions of this site are not available in all languages. Solve printer management problems This section provides solutions to common problems that involve managing the printer. This section contains the following topic: • Embedded web server cannot be opened NOTE: To use the embedded web server, the printer must be connected to a network using either an Ethernet or a wireless connection.
Chapter 8 Check the printer IP address • To check the IP address of the printer, obtain the IP address by printing a network configuration page. Touch (right arrow), touch Setup, touch Network, and then touch Print Network Settings. • Ping the printer using the IP address from the command prompt (Windows) or from Network Utility (Mac OS X). (Network Utility is located in the Utilities folder in the Applications folder at the top level of the hard disk.) For example, if the IP address is 123.123.123.
Check the ink cartridges Make sure that all of the ink cartridges are firmly installed and aligned in their correct, color-coded slot. A correctly installed ink cartridge should not move when pulled slightly. The printer cannot work if all the ink cartridges are not installed. HP software installation suggestions Check the computer system • Make sure that your computer is running one of the supported operating systems. For more information, see System requirements.
Chapter 8 ◦ • Make sure the printer is installed on the same subnet as the computers that use the printer. ◦ If the installation program cannot discover the printer, print the network configuration page and enter the IP address manually in the installation program. For more information, see Understand the network configuration page.
If you need to call HP, it is often useful to print the printer status report before calling. 1. 2. Printer Information: Shows printer information (such as the printer name, model number, serial number, and firmware version number), the accessories that are installed (such as the automatic two-sided printing accessory or duplexer), and the number of pages printed from the trays and accessories.
Chapter 8 help troubleshoot network connectivity problems. If you need to call HP, it is often useful to print this page before calling. 1. 2. 3. 4. 130 General Information: Shows information about the current status and active connection type of the network, and other information, such as the URL of the embedded web server. 802.3 Wired: Shows information about the active wired network connection, such as the IP address, subnet mask, default gateway, as well as the hardware address of the printer.
• • SLP: Service Location Protocol (SLP) is an Internet standard network protocol that provides a framework to allow networking applications to discover the existence, location, and configuration of networked services in enterprise networks. This protocol simplifies discovery and use of network resources such as printers, web servers, fax machines, video cameras, files systems, backup devices (tape drives), databases, directories, mail servers, calendars.
Chapter 8 To clear a jam inside the printer 1. Remove all media from the output tray. CAUTION: Trying to clear a paper jam from the front of the printer can damage the print mechanism. Always access and clear paper jams through the automatic two-sided printing accessory (duplexer). 2. Check the duplexer. a. Push the buttons on either side of the duplexer, and then remove the duplexer. b. Locate any jammed media inside the printer, grasp it with both hands, and then pull it towards you.
c. Move the carriage to the left, locate any jammed media inside the printer on the right side of the carriage, free any paper scraps or wrinkled media, and pull the media towards you through the front of the printer. WARNING! Do not reach into the printer when it is turned on and the carriage is stuck. When you open the ink cartridge access door, the carriage should return to its position on the right side of the printer. If it does not move to the right, turn off the printer before you remove any jam.
Chapter 8 3. Gently pull the paper out of the rollers. CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the printer. If you do not remove all the pieces of paper from the printer, more paper jams are likely to occur. 4. Close the cover of the automatic document feeder, pressing down firmly until it snaps into place. Avoid paper jams To help avoid paper jams, follow these guidelines.
A Technical information This section contains the following topics: • Warranty information • Printer specifications • Regulatory information • Environmental product stewardship program • Third-party licenses Warranty information This section contains the following topics: • Hewlett-Packard limited warranty statement • Ink cartridge warranty information Technical information 135
Appendix A Hewlett-Packard limited warranty statement 136 Technical information
Ink cartridge warranty information The HP cartridge warranty is applicable when the product is used in its designated HP printing . This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with. During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not been reached.
Appendix A Printer specifications This section contains the following topics: • Physical specifications • • Product features and capacities Processor and memory specifications • System requirements • • Network protocol specifications Embedded web server specifications • Media specifications • • Print specifications Copy specifications • Fax specifications • • Scan specifications Web Services specifications • HP website specifications • • Environmental specifications Electrical specificat
(continued) Feature Capacity Font support US fonts: CG Times, CG Times Italic, Universe, Universe Italic, Courier, Courier Italic, Letter Gothic, Letter Gothic Italic. Duty cycle Up to 12,000 pages per month Printer control panel language support Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Simplified Chinese, Slovak, Slovenian, Spanish, Swedish, Traditional Chinese, Turkish.
Appendix A • • Mac OS X v10.5, v10.6, v10.7 Microsoft Windows 2003 Server Terminal Services • Microsoft Windows 2003 Server Terminal Services with Citrix Presentation Server 4.0 • • Microsoft Windows 2003 Server Terminal Services with Citrix Presentation Server 4.5 Microsoft Windows 2003 Server Terminal Services with Citrix XenApp 5.
Understand supported sizes Media size Input tray ADF Duplexer Standard media sizes 10x15cm* 2L U.S. Letter (216 x 279 mm; 8.5 x 11 inches) 8.5 x 13 inches (216 x 330 mm) U.S. Legal (216 x 356 mm; 8.5 x 14 inches) A4 (210 x 297 mm; 8.3 x 11.7 inches)* U.S. Executive (184 x 267 mm; 7.25 x 10.5 inches) U.S. Statement (140 x 216 mm; 5.5 x 8.5 inches) B5 (JIS) (182 x 257 mm; 7.17 x 10.12 inches)* A5 (148 x 210 mm; 5.8 x 8.3 inches)* Edge-to-Edge A4* Edge-to-Edge Letter* Envelopes U.S.
Appendix A (continued) Media size Input tray ADF Duplexer Japanese Envelope Chou #4 (90 x 205 mm; 3.5 x 8.1 inches) Cards Index card (76.2 x 127 mm; 3 x 5 inches) Index card (102 x 152 mm; 4 x 6 inches) Index card (127 x 203 mm; 5 x 8 inches) A6 card (105 x 148.5 mm; 4.13 x 5.83 inches) A4 index card (210 x 297 mm; 8.3 x 11.7 inches) Hagaki** (100 x 148 mm; 3.9 x 5.8 inches) Ofuku Hagaki** (200 x 148 mm; 7.8 x 5.8 inches) Index Card Letter (216 x 279 mm; 8.5 x 11 inches) Photo media Photo media (76.
(continued) Media size Input tray ADF Duplexer mm long (5 to 8.5 inches wide and 9.5 to 12 inches long) * These sizes can be used for borderless printing. ** The printer is compatible with plain and inkjet hagaki from Japan Post only. It is not compatible with photo hagaki from Japan Post.
Appendix A Set minimum margins The document margins must match (or exceed) these margin settings in portrait orientation. Media (1) Left margin (2) Right margin (3) Top margin (4) Bottom margin U.S. Letter 3.3 mm (0.13 inch) 3.3 mm (0.13 inch) 3.3 mm (0.13 inch) 3.3 mm (0.13 inch) Windows and 12mm (0.47 inch) Macintosh and Linux 3.3 mm (0.13 inch) 3.3 mm (0.13 inch) 16.5 mm (0.65 inch) 16.5 mm (0.65 inch) U.S. Legal A4 U.S. Executive U.S. Statement 8.
• For auto-duplexing, when printing finishes on one side of the media, the printer holds the media and pauses while the ink dries. Once the ink dries, the media is pulled back into the printer and the second side is printed. When printing is complete, the media is dropped onto the output tray. Do not grab it before printing is complete. • You can print on both sides of supported custom-sized media by turning the media over and feeding it into the printer again.
Appendix A • Resolution: ◦ Scanner glass: 1200 x 1200 ppi • • Color: 24-bit color, 8-bit grayscale (256 levels of gray) Maximum scan size: ◦ ADF: 600 x 600 ppi ◦ Scanner glass: 216 x 297 mm (8.5 x 11.7 inches) ◦ ADF: 216 x 356 mm (8.5 x 14 inches) Web Services specifications An Internet connection using either a wired (Ethernet) or wireless connection.
Power requirements Input voltage: 100 to 240 VAC, 50/60 Hz Output voltage: +32V/+12V at 1094 mA/250 mA Power consumption 26.64 watts printing (Fast Draft Mode); 17.76 watts copying (Fast Draft Mode) Acoustic emission specifications Print in Draft mode, noise levels per ISO 7779 • Sound pressure (bystander position) • Sound power LpAm 55 (dBA) (mono Draft print) LwAd 6.
Appendix A Regulatory information The printer meets product requirements from regulatory agencies in your country/region. This section contains the following topics: • • Regulatory Model Number FCC statement • Notice to users in Korea • • VCCI (Class B) compliance statement for users in Japan Notice to users in Japan about the power cord • Noise emission statement for Germany • • LED indicator statement Gloss of housing of peripheral devices for Germany • Notice to users of the U.S.
FCC statement Notice to users in Korea Regulatory information 149
Appendix A VCCI (Class B) compliance statement for users in Japan Notice to users in Japan about the power cord Noise emission statement for Germany LED indicator statement Gloss of housing of peripheral devices for Germany 150 Technical information
Notice to users of the U.S.
Appendix A Notice to users of the Canadian telephone network Notice to users of the German telephone network 152 Technical information
Australia wired fax statement European Union Regulatory Notice Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable: Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/EC, Ecodesign Directive 2009/125/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following website: www.hp.
Appendix A Regulatory information for wireless products This section contains the following regulatory information pertaining to wireless products: • Exposure to radio frequency radiation • Notice to users in Brazil • Notice to users in Canada • Notice to users in Taiwan Exposure to radio frequency radiation Notice to users in Brazil Notice to users in Canada 154 Technical information
Notice to users in Taiwan Regulatory information 155
Appendix A Environmental product stewardship program Hewlett-Packard is committed to providing quality products in an environmentally sound manner. Design for recycling has been incorporated into this product. The number of materials has been kept to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been designed to separate easily. Fasteners and other connections are easy to locate, access, and remove using common tools.
www.hp.com/hpinfo/globalcitizenship/environment/recycle/ Disposal of waste equipment by users This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service, or go to http://www.hp.com/ recycle.
Appendix A Battery Notice for Brazil Disposal of Waste Electronic Equipment in Brazil Attention California users The battery supplied with this product may contain perchlorate material. Special handling may apply. For more information, go to the following web site: www.dtsc.ca.
EU battery directive Environmental product stewardship program 159
Appendix A RoHS notices (China only) Toxic and hazardous substance table RoHS notices (Ukraine only) Restriction of hazardous substance (India) 160 Technical information
Third-party licenses LICENSE.aes-pubdom--crypto --------------------/* rijndael-alg-fst.c * * @version 3.0 (December 2000) * * Optimised ANSI C code for the Rijndael cipher (now AES) * * @author Vincent Rijmen * @author Antoon Bosselaers * @author Paulo Barreto * * This code is hereby placed in the public domain.
Appendix A THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. LICENSE.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.
Appendix A ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] ==================================================================== Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Appendix A "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)" THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
Appendix A 168 Technical information
B HP supplies and accessories This section provides information on HP supplies and accessories for the printer. The information is subject to changes, visit the HP web site (www.hpshopping.com) for the latest updates. You may also make purchases through the web site. NOTE: Not all cartridges are available in all countries/regions.
Appendix B NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace cartridges until prompted to do so. HP media To order media such as HP Premium Paper, go to www.hp.com. HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents.
C Additional fax setup After completing all the steps in the getting started guide, use the instructions in this section to complete your fax setup. Keep your getting started guide for later use. In this section, you learn how to set up the printer so that faxing works successfully with equipment and services you might already have on the same phone line.
Appendix C Countries/regions with a parallel-type phone system (continued) Mexico Philippines Poland Portugal Russia Saudi Arabia Singapore Spain Taiwan Thailand USA Venezuela Vietnam If you are unsure which kind of telephone system you have (serial or parallel), check with your telephone company.
3. • Answering machine: An answering machine that answers voice calls at the same phone number you use for fax calls on the printer. • Voice mail service: A voice mail subscription through your telephone company at the same number you use for fax calls on the printer. From the following table, select the combination of equipment and services applicable to your home or office setting. Then look up the recommended fax setup.
Appendix C (continued) Other equipment or services sharing your fax line DSL PBX Distinct ive ring service Voice calls Computer dial-up modem Answering machine Voice mail service Recommended fax setup Case J: Shared voice/fax line with computer modem and answering machine Case K: Shared voice/fax line with computer dial-up modem and voice mail Case A: Separate fax line (no voice calls received) If you have a separate phone line on which you receive no voice calls, and you have no other equipment co
To set up the printer with a separate fax line 1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully.
Appendix C To set up the printer with DSL 1. Obtain a DSL filter from your DSL provider. 2. Using the phone cord supplied in the box with the printer, connect one end to the open port on the DSL filter, and then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region.
Case D: Fax with a distinctive ring service on the same line If you subscribe to a distinctive ring service (through your telephone company) that allows you to have multiple phone numbers on one phone line, each with a different ring pattern, set up the printer as described in this section. Back view of the printer 1 Telephone wall jack 2 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
Appendix C 4. 5. (Optional) Change the Rings to Answer setting to the lowest setting (two rings). Run a fax test. The printer automatically answers incoming calls that have the ring pattern you selected (Distinctive Ring setting) after the number of rings you selected (Rings to Answer setting). The printer begins emitting fax reception tones to the sending fax machine and receives the fax.
3. 4. Now you need to decide how you want the printer to answer calls, automatically or manually: • If you set up the printer to answer calls automatically, it answers all incoming calls and receives faxes. The printer cannot distinguish between fax and voice calls in this case; if you suspect the call is a voice call, you need to answer it before the printer answers the call. To set up the printer to answer calls automatically, turn on the Auto Answer setting.
Appendix C To set up the printer with voice mail 1. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. You might need to connect the supplied phone cord to the adapter provided for your country/region. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region.
(continued) You might need to connect the supplied phone cord to the adapter provided for your country/region. 3 Computer with modem To set up the printer with a computer dial-up modem 1. Remove the white plug from the port labeled 2-EXT on the back of the printer. 2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the printer. 3.
Appendix C 1 Telephone wall jack 2 Parallel splitter 3 DSL/ADSL filter Connect one end of the phone jack that was supplied with the printer to connect to the 1-LINE port on the back of the printer. Connect the other end of the cord to the DSL/ADSL filter. You might need to connect the supplied phone cord to the adapter provided for your country/region. 4 Computer 5 Computer DSL/ADSL modem NOTE: You need to purchase a parallel splitter.
NOTE: If your computer has only one phone port, you need to purchase a parallel splitter (also called a coupler), as shown in the illustration. (A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a two-line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.
Appendix C 1. 2. Remove the white plug from the port labeled 2-EXT on the back of the printer. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the printer. 3. Connect a phone to the "OUT" port on the back of your computer dial-up modem. 4.
Shared voice/fax with computer DSL/ADSL modem Use these instructions if your computer has a DSL/ADSL modem 1 Telephone wall jack 2 Parallel splitter 3 DSL/ADSL filter 4 Use the phone cord provided to connect to the 1-LINE port on the back of the printer. You might need to connect the supplied phone cord to the adapter provided for your country/region. 5 DSL/ADSL modem 6 Computer 7 Telephone NOTE: You need to purchase a parallel splitter.
Appendix C To set up the printer with a computer DSL/ADSL modem 1. Obtain a DSL filter from your DSL provider. NOTE: Phones in other parts of the home/office sharing the same phone number with DSL service need to be connected to additional DSL filters to avoid noise when making voice calls. 2. Using the phone cord supplied in the box with the printers, connect one end to the DSL filter, then connect the other end to the port labeled 1-LINE on the back of the printer.
(continued) 3 Answering machine 4 Telephone (optional) To set up the printer with a shared voice/fax line with answering machine 1. Remove the white plug from the port labeled 2-EXT on the back of the printer. 2. Unplug your answering machine from the telephone wall jack, and connect it to the port labeled 2-EXT on the back of the printer.
Appendix C NOTE: Since your computer dial-up modem shares the phone line with the printer, you cannot use both your modem and the printer simultaneously. For example, you cannot use the printer for faxing while you are using your computer dial-up modem to send an email or access the Internet.
(continued) 7 Use the phone cord supplied in the box with the printer to connect to the 1-LINE port. You might need to connect the supplied phone cord to the adapter provided for your country/region. 1. Remove the white plug from the port labeled 2-EXT on the back of the printer. 2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack.
Appendix C Shared voice/fax line with computer DSL/ADSL modem and answering machine 1 Telephone wall jack 2 Parallel splitter 3 DSL/ADSL filter 4 Phone cord provided with the printer connected to the 1-LINE port on the back of the printer You might need to connect the supplied phone cord to the adapter provided for your country/region. 5 DSL/ADSL modem 6 Computer 7 Answering machine 8 Telephone (optional) NOTE: You need to purchase a parallel splitter.
To set up the printer with a computer DSL/ADSL modem 1. Obtain a DSL/ADSL filter from your DSL/ADSL provider. NOTE: Phones in other parts of the home/office sharing the same phone number with DSL/ADSL service need to be connected to additional DSL/ADSL filters, to avoid noise when making voice calls. 2. Using the phone cord supplied in the box with the printer, connect one end to the DSL/ ADSL filter, then connect the other end to the port labeled 1-LINE on the back of the printer.
Appendix C Since your computer dial-up modem shares the phone line with the printer, you cannot use both your modem and the printer simultaneously. For example, you cannot use the printer for faxing if you are using your computer dial-up modem to send an email or access the Internet. There are two different ways to set up the printer with your computer based on the number of phone ports on your computer. Before you begin, check your computer to see if it has one or two phone ports.
4. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer. NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region. If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not be able to fax successfully.
Appendix C (continued) Italy www.hp.com/it/faxconfig Test fax setup You can test your fax setup to check the status of the printer and to make sure it is set up correctly for faxing. Perform this test after you have completed setting up the printer for faxing.
D Network setup You can manage network settings for the printer through the printer control panel as described in the next section. Additional advanced settings are available in the embedded web server, a configuration and status tool you access from your web browser using an existing network connection to the printer. For more information, see Embedded web server.
Appendix D TIP: If you are using a computer running Windows, HP provides a tool called HP Home Network Diagnostic Utility that can help retrieve this information for some systems. To use this tool, visit the HP Wireless Printing Center (www.hp.com/go/wirelessprinting), and then click Network Diagnostic Utility in the Quick Links section. (At this time, this tool might not be available in all languages.
To connect the printer using the Push Button Method 1. On the printer control panel, touch 2. Touch Wi-Fi Protected Setup, and then follow the onscreen instructions. (right arrow), touch Setup, and then touch Network. 3. 4. When prompted, touch Push Button. On the wireless router or wireless access point, press and hold the WPS button for 3 seconds. Wait for about 2 minutes. If the printer connects successfully, the wireless light stops blinking but remains lit.
Appendix D Follow the instructions for your operating system. Windows 1. On the computer desktop, click Start, select Programs or All Programs, click HP, select your printer name, and then click Printer Setup & Software. 2. Click Connect a new printer, and then click Convert a USB connected printer to wireless. 3. Follow the display instructions to complete the setup. Mac OS X 1. Open HP Utility. For more information, see To open HP Utility. 2. Click the Applications on the HP Utility toolbar. 3.
Overview of security settings To help improve the security of the wireless network and prevent unauthorized access, the printer supports many common types of network authentication, including WEP, WPA, and WPA2. • • • WEP: Provides security by encrypting data sent over radio waves from one wireless device to another wireless device. Devices on a WEP-enabled network use WEP keys to encode data. If your network uses WEP, you must know the WEP key(s) it uses.
Appendix D • Turn off administrative access over wireless if possible. If you do this, you need to connect to the router with a wired Ethernet connection when you want to make configuration changes. • Turn off remote administrative access over the Internet on your router, if possible. You can use Remote Desktop to make an encrypted connection to a computer running behind your router and make configuration changes from the local computer you are accessing over the Internet.
This section contains the following topics: Set link speed • • View IP settings • • Change IP settings Reset network settings Set link speed You can change the speed at which data is transmitted over the network. The default is Automatic. 1. Touch (right arrow), touch Setup, and then touch Network. 2. Select Advanced Setup, then touch Link Speed. 3.
Appendix D Uninstall and reinstall the HP software If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the HP software installation screen, you might need to uninstall and then reinstall the HP software that came with the printer. Do not simply delete the printer application files from your computer. To uninstall from a Windows computer: 1. On the computer desktop, click Start, select Settings, click Control Panel, and then click Add/Remove Programs.
E Printer management tools This section contains the following topics: • Toolbox (Windows) • HP Utility (Mac OS X) • Embedded web server Toolbox (Windows) The Toolbox provides maintenance information about the printer. NOTE: The Toolbox can be installed from the HP Software CD if the computer meets the system requirements. Open the Toolbox 1.
Appendix E example, if you have configured the EWS language, a cookie helps remember which language you have selected so that the next time you access the EWS, the pages are displayed in that language. Though some cookies are cleared at the end of each session (such as the cookie that stores the selected language), others (such as the cookie that stores customer-specific preferences) are stored on the computer until you clear them manually.
F How do I? • Get started • Print • Scan • Copy • Fax • Web Services • Work with ink cartridges • Solve a problem How do I? 205
G Errors (Windows) Fax memory full If Backup Fax Reception or HP Digital Fax (Fax to PC or Fax to Mac) is enabled and the printer has a problem (such as a paper jam), the printer saves incoming faxes to memory until the problem is resolved. However, the printer’s memory might fill up with faxes that have not been printed yet or transferred to the computer. To solve this problem, resolve any problems with the printer. For more information, see Solve fax problems.
NOTE: If the cartridge is identified in the message as incompatible, see Order printing supplies online for information about obtaining cartridges for the printer. To solve this problem, try the following solutions. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Turn the printer off and on. • Solution 2: Install the ink cartridges correctly.
Appendix G For instructions on clearing jams, as well as more information about how to avoid jams, see Clear jams. The printer is out of paper The default tray is empty. Load more paper, and then touch OK. For more information, see Load media. Printer Offline The printer is currently offline. While offline, the printer cannot be used. To change the printer's status, complete the following steps. 1. Click Start, and then click Printers or Printers and Faxes or Devices and Printers.
Door or cover open Before the printer can print documents, all doors and covers must be closed. TIP: When completely closed, most doors and covers snap into place. If the problem persists after you’ve securely closed all doors and covers, contact HP support. For more information, see HP support. Previously used ink cartridge installed The ink cartridge identified in the message was previously used in a different printer.
Appendix G Non-HP ink cartridges installed HP cannot guarantee the quality or reliability of non-HP supplies. Printer service or repairs required as a result of using a non-HP supply will not be covered under warranty. If you believe you purchased original HP ink cartridges, visit HP at www.hp.com/go/anticounterfeit for more information or to report fraud. Using Original HP Cartridges has its Rewards HP rewards loyal customers for using original HP supplies.
To temporarily print using Black ink only, click Use Black Only. The printer will replace color with grayscale. The empty cartridges will need to be replaced soon. CAUTION: Do NOT remove the empty color cartridge to print in Use Black Only mode. Use color ink only? The black cartridge is out of ink. Solutions: To temporarily replace black with color, click Use Color Only. Black will be simulated. Text and photo quality will differ from those printed when using all cartridges.
Appendix G Solutions: Replace the black ink cartridge. For information about how to install new cartridges, see Replace the ink cartridges. CAUTION: Do NOT remove the empty black cartridge to print in Use Color Only mode. To temporarily replace black with color, click Cancel Print and re-send the print job. The Use color ink only? message appears before the job prints. The black cartridge will need to be replaced soon.
Index A accessibility 3, 9 accessories printer status report 129 warranty 136 acoustic emissions 147 ADF (automatic document feeder) load originals 19 media sizes supported 141 ADSL, fax setup with parallel phone systems 175 after the support period 82 align printhead 92 answer ring pattern change 61 parallel phone systems 177 answering machine fax tones recorded 114 set up with fax (parallel phone systems) 186 set up with fax and modem 187 automatic document feeder (ADF) clean 26 feeding problems, troubles
dots or streaks, troubleshoot copies 96 dots, troubleshoot scan 101 double-sided printing 36 driver warranty 136 DSL, fax setup with parallel phone systems 175 duplexer clear jams 131 media types and weights supported 143 duty cycle 139 E ECM.
Index graphics incompletely filled on copies 97 look different from original scan 101 H hardware, fax setup test 103 head 91 header, fax 60 Help 14 Hewlett-Packard Company notices 3 HP Utility (Mac OS X) opening 203 humidity specifications 146 I ink cartridges check ink levels 74 locating 11 ordering online 169 part numbers 129, 169 replace 75 status 129 supported 138 tips 73 warranty 136 warranty expiration dates 129 yields 138 ink level icons 14 ink levels, check 74 ink-cartridge access door, locating 1
link speed 201 operating systems supported 139 protocols supported 140 settings, change 200 solve problems 127 system requirements 140 view and print settings 200 wireless communication setup 195 wireless settings 129 noise information 147 O OCR edit scanned documents 40 troubleshoot 99 operating environment specifications 146 operating systems supported 139 originals scan 38 output tray locating 11 media supported 143 P pages per month (duty cycle) 139 paper jams 131, 134 size, set for fax 54 paper-feed
Index reduce fax 54 regulatory information 148, 154 regulatory model number 148 replace ink cartridges 75 reports confirmation, fax 65 diagnostic 89 error, fax 66 fax test failed 102 print quality 89 printhead 91 reprint faxes from memory 52 right navigation button 13 rings to answer 61 S save faxes in memory 52 scan error messages 100 from printer control panel 38 from Webscan 40 OCR 40 quality 100 Scan screen 14 scan specifications 145 slow 98 troubleshoot 97 Scan screen 14 scanner glass clean 25 load or
tests, fax dial tone, failed 106 failed 102 fax line condition 107 fax phone cord type test failed 105 hardware, failed 103 port connection, failed 104 setup 194 telephone wall jack 103 text cannot be edited after scan, troubleshoot 99 incompletely filled on copies 97 missing from scan, troubleshoot 98 splotchy on copies 97 troubleshoot 86 unclear on copies, troubleshoot 97 unclear scans 102 tone dialing 62 tray 2 capacity 143 media sizes supported 141 media types and weights supported 143 trays capacities