HP Officejet 6800
HP Officejet 6800 Benutzerhandbuch
Copyright-Informationen Hinweise von Hewlett-Packard Marken © 2014 Copyright Hewlett-Packard Development Company, L.P. Die in diesem Dokument enthaltenen Informationen können ohne vorherige Ankündigung geändert werden. Microsoft, Windows, Windows XP, Windows Vista, Windows 7, Windows 8 und Windows 8.1 sind in den USA eingetragene Warenzeichen der Microsoft Corporation. 1. Ausgabe, 7/2014 Alle Rechte vorbehalten.
Sicherheitsinformationen Befolgen Sie bei Verwendung dieses Geräts stets die grundlegenden Sicherheitsvorkehrungen, um die Verletzungsgefahr durch Brand oder Stromschlag auf ein Minimum zu reduzieren. 1. Lesen und beachten Sie unbedingt die Anweisungen in der Dokumentation, die dem Drucker beiliegt. 2. Beachten Sie sämtliche auf dem Produkt angebrachten Warnhinweise und Anweisungen. 3. Ziehen Sie vor dem Reinigen des Produkts den Netzstecker. 4.
Inhaltsverzeichnis 1 Vorgehensweise ............................................................................................................................................... 1 2 Erste Schritte .................................................................................................................................................... 2 Eingabehilfen ........................................................................................................................................
Drucken mit AirPrintTM ...................................................................................................................... 33 4 Kopieren und scannen .................................................................................................................................... 34 Kopieren ............................................................................................................................................. 34 Scannen ..............................................
Ändern der Faxeinstellungen ............................................................................................................. 56 Einrichten der Faxkopfzeile ............................................................................................... 57 Einstellen des Antwortmodus (Autom. Annehmen) ........................................................... 57 Einstellen der Ruftonanzahl bis zur Rufannahme ..............................................................
Einrichten des Druckers im Wireless-Netzwerk ................................................................. 77 Wechseln des Verbindungstyps ........................................................................................ 77 Testen der Wireless-Verbindung ....................................................................................... 78 Ein- oder Ausschalten der Wireless-Funktionen des Druckers ......................................... 79 Ändern der Netzwerkeinstellungen ..................
Beim Senden und Empfangen von Faxnachrichten mit dem Drucker treten Probleme auf .................................................................................................................................... 112 Das Senden von Faxen mit dem Drucker ist nicht möglich, das Empfangen von Faxen dagegen schon ................................................................................................................
Konformitätserklärung ...................................................................................................... 147 Zulassungshinweise für Wireless-Produkte ..................................................................... 148 Belastung durch Hochfrequenzstrahlung ........................................................ 148 Hinweis für Benutzer in Brasilien .................................................................... 148 Hinweis für Benutzer in Kanada ...............................
Gemeinsame Leitung für Telefon-/Faxanrufe und DSL-/ADSL-Modem .......... 171 Szenario I: Gemeinsamer Anschluss für Telefon-/Faxanrufe mit Anrufbeantworter ........ 173 Szenario J: Gemeinsame Leitung für Telefon-/Faxanrufe, Computermodem und Anrufbeantworter ............................................................................................................. 174 Gemeinsame Leitung für Telefon-/Faxanrufe, Computermodem und Anrufbeantworter ..............................................................
Geschützte HP Patrone eingesetzt .................................................................................................. 189 Index .................................................................................................................................................................
1 DEWW Vorgehensweise ● „Erste Schritte“ ● „Drucken“ ● „Kopieren und scannen“ ● „Fax“ ● „Webdienste“ ● „Arbeiten mit Tintenpatronen“ ● „Beheben von Problemen“ 1
2 Erste Schritte Dieses Handbuch enthält Informationen zur Verwendung des Produkts und zur Problembehandlung.
HP EcoSolutions (HP und die Umwelt) Hewlett-Packard engagiert sich zusammen mit Ihnen für ein möglichst umweltschonendes Drucken – sei es zu Hause oder im Büro. Detaillierte Informationen zu den Umweltrichtlinien, die HP beim Fertigungsprozess berücksichtigt, finden Sie unter Programm zur umweltfreundlichen Produktherstellung. Weitere Informationen zu den Umweltinitiativen von HP finden Sie unter www.hp.com/ecosolutions.
● Verwenden Sie HP Smart Print zum Drucken von Webinhalten, um Tinte und Papier einzusparen. Weitere Informationen finden Sie unter www.hp.com/go/smartprint. ● Ändern Sie die Druckqualität im Druckertreiber auf eine Einstellung für Entwurfsdruck. Bei dieser Einstellung wird weniger Tinte verbraucht. ● Reinigen Sie den Druckkopf nur, wenn es nötig ist. Andernfalls verschwenden Sie Tinte und verkürzen die Lebensdauer der Patronen.
Bereich für Verbrauchsmaterial 1 Druckkopf 2 Tintenpatronen HINWEIS: Die Tintenpatronen müssen im Drucker verbleiben, um mögliche Probleme bei der Druckqualität und Schäden am Druckkopf zu vermeiden. Nehmen Sie Verbrauchsmaterialien nicht für längere Zeit aus dem Drucker heraus. Schalten Sie den Drucker nicht aus, wenn eine Patrone fehlt.
Verwenden des Druckerbedienfelds Dieser Abschnitt behandelt folgende Themen: ● Tasten und LEDs auf einen Blick ● Symbole – Bedienfelddisplay ● Ändern der Druckereinstellungen Tasten und LEDs auf einen Blick Die folgende Abbildung und die dazugehörige Tabelle geben eine Übersicht über das Bedienfeld des Druckers. Kennzeichnung Name und Beschreibung 1 Wireless (LED): Zeigt den Status der Wireless-Verbindung des Druckers an.
Symbol Beschreibung Zeigt an, dass HP ePrint aktiviert ist. Weitere Informationen hierzu finden Sie unter HP ePrint. Dient zum Anzeigen eines Bildschirms, in dem Sie Faxnachrichten senden oder Faxeinstellungen ändern können. Öffnet eine Anzeige, über die Sie scannen können. Dient zum Öffnen einer Anzeige, über die Sie verschiedene HP Drucksachen verwenden können. Dabei handelt es sich um Apps für Ihren Drucker. Dient zum Öffnen der Anzeige „Foto“, über die Sie Fotos drucken und Passfotos erstellen können.
1. Tippen Sie auf das Bedienfelddisplay und fahren Sie mit dem Finger über die Anzeige. Tippen Sie dann auf das Symbol, um die gewünschte Funktion auszuwählen. 2. Tippen Sie nach dem Auswählen einer Funktion auf die verfügbaren Einstellungen und blättern Sie durch diese Einstellungen. Tippen Sie dann auf die Einstellung, die Sie ändern möchten. 3. Befolgen Sie die Anweisungen auf dem Bedienfelddisplay, um die Einstellungen zu ändern.
Fotodruck ● HP Premium Plus Fotopapier HP Premium Plus Fotopapier ist das hochwertigste HP Fotopapier für Ihre besten Fotos. Bei HP Premium Plus Fotopapier erhalten Sie exzellente Fotos, die sofort trocknen. Somit können Sie diese gleich nach dem Drucken aus dem Drucker herausnehmen und zeigen.
Normales Drucken Alle Papiere, die für den alltäglichen Druck aufgelistet sind, verfügen über die ColorLok-Technologie für geringeres Verschmieren, kräftigere Schwarztöne und brillante Farben. ● HP Inkjet-Papier, hochweiß HP Inkjet Papier, hochweiß ermöglicht kontrastreiche Farben und gestochen scharfen Text. Das Papier ist nicht durchscheinend, sodass es sich für beidseitigen Farbdruck eignet. Es ist also die ideale Wahl für Newsletter, Berichte und Flugblätter.
◦ Druckmedien, deren Oberfläche stark strukturiert bzw. geprägt ist oder die Tinte nicht gut aufnehmen ◦ Zu leichte oder leicht dehnbare Druckmedien ◦ Medien mit Heft- oder Büroklammern Weitere Informationen zum Einlegen von Papier finden Sie unter Einlegen von Papier oder Einlegen von Originalen in den Vorlageneinzug. Einlegen von Papier So legen Sie Standardpapier ein 1. Heben Sie das Ausgabefach an. 2. Ziehen Sie das Zufuhrfach heraus, um es zu verlängern.
4. Legen Sie das Papier mit der zu bedruckenden Seite nach unten in die Mitte des Fachs. Stellen Sie sicher, dass das Papier an den entsprechenden Papierformatlinien unten im Zufuhrfach ausgerichtet ist und der Stapel die seitliche Markierung für die Stapelhöhe nicht überschreitet. HINWEIS: Legen Sie kein Papier ein, während der Drucker druckt. 5. 12 Schieben Sie die Papierquerführungen im Fach bündig an die Kante des Papierstapels heran und schließen Sie dann das Fach.
6. In einer Meldung auf dem Bedienfelddisplay werden Sie aufgefordert, die Papiereinstellung zu ändern, wenn der Medientyp geändert wurde, oder die Einstellung beizubehalten, wenn die zuvor eingelegten Medien ausgetauscht wurden. 7. Ziehen Sie die Ausgabefachverlängerung heraus. So legen Sie Briefumschläge ein DEWW 1. Heben Sie das Ausgabefach an. 2. Ziehen Sie das Zufuhrfach heraus, um es zu verlängern.
3. Legen Sie die Briefumschläge mit der zu bedruckenden Seite nach unten ein. Beachten Sie dabei die Abbildung. Stellen Sie sicher, dass das Papier an den entsprechenden Papierformatlinien unten im Zufuhrfach ausgerichtet ist und der Stapel die seitliche Markierung für die Stapelhöhe nicht überschreitet. HINWEIS: Legen Sie keine Umschläge ein, während der Drucker druckt. 14 4.
So legen Sie Karten und Fotopapier ein 1. Heben Sie das Ausgabefach an. 2. Ziehen Sie das Zufuhrfach heraus, um es zu verlängern. 3. Legen Sie das Papier mit der zu bedruckenden Seite nach unten in die Mitte des Fachs. Stellen Sie sicher, dass das Papier an den entsprechenden Papierformatlinien unten im Zufuhrfach ausgerichtet ist und der Stapel die seitliche Markierung für die Stapelhöhe nicht überschreitet. HINWEIS: Legen Sie kein Papier ein, während der Drucker druckt.
4. Schieben Sie die Papierquerführungen im Fach bündig an die Kante des Papierstapels heran und schließen Sie dann das Fach. 5. In einer Meldung auf dem Bedienfelddisplay werden Sie aufgefordert, die Papiereinstellung zu ändern, wenn der Medientyp geändert wurde, oder die Einstellung beizubehalten, wenn die zuvor eingelegten Medien ausgetauscht wurden. 6. Ziehen Sie die Ausgabefachverlängerung heraus.
2. Legen Sie das Original mit der Druckseite nach unten ein (siehe folgende Abbildung). TIPP: Die eingravierten Linien entlang der Kanten des Scannerglases bieten beim Auflegen von Originalen eine Orientierungshilfe. 3. Schließen Sie die Abdeckung. Einlegen von Originalen in den Vorlageneinzug Sie können ein Dokument kopieren, scannen oder faxen, indem Sie es in den Vorlageneinzug einlegen. Der Vorlageneinzug kann maximal 35 Blatt Normalpapier im Format DIN A4, Letter oder Legal aufnehmen.
2. Schieben Sie die Papierquerführungen nach innen bis an die linke und rechte Kante des Papiers heran. Einsetzen eines USB-Flash-Laufwerks Sie können ein USB-Flash-Laufwerk in den Anschluss an der Vorderseite des Druckers einsetzen. Sie können Dateien vom USB-Flash-Laufwerk auf Ihren Computer übertragen oder vom Drucker aus Dateien auf das USB-Flash-Laufwerk scannen. ACHTUNG: Nehmen Sie das Flash-Laufwerk nicht aus dem USB-Anschluss des Druckers, während vom Drucker darauf zugegriffen wird.
So aktivieren Sie auf dem Drucker die automatische Suche nach Aktualisierungen HINWEIS: Die Standardeinstellung für Autom. Aktualisierung lautet Ein. 1. Tippen Sie auf dem Bedienfelddisplay des Druckers auf 2. Tippen Sie auf OK. 3. Tippen Sie auf Einst. und dann auf Aktualisieren des Druckers. 4. Tippen Sie auf Autom. Aktualisierung und dann auf Ein. (HP ePrint). So aktualisieren Sie den Drucker mithilfe des eingebetteten Webservers (EWS) 1. Öffnen Sie den EWS.
3 Drucken Die meisten Druckeinstellungen werden von der Anwendung automatisch festgelegt. Sie müssen die Einstellungen lediglich dann manuell ändern, wenn Sie die Druckqualität ändern, auf bestimmten Papiertypen drucken oder Sonderfunktionen verwenden möchten. Weitere Informationen zur Auswahl des besten Druckerpapiers für Ihre Dokumente finden Sie unter Grundlagen zum Papier.
● Wählen Sie auf der Registerkarte Layout die Orientierung Portrait oder Querformat aus. ● Wählen Sie auf der Registerkarte Papier/Qualität im Bereich Fachauswahl in der Dropdown-Liste Medien den entsprechenden Papiertyp aus. Wählen Sie dann in der Dropdown-Liste Qualitätseinstellungen die entsprechende Druckqualität aus. ● Klicken Sie im Bereich Papier/Ausgabe auf die Schaltfläche Erweitert und wählen Sie das entsprechende Papierformat im Dropdown-Menü Papierformat aus.
HINWEIS: Wenn die Druckeinstellungen für alle Druckaufträge verwendet werden sollen, nehmen Sie die Änderungen in der mit dem Drucker gelieferten HP Software vor. Weitere Informationen zur HP Software finden Sie unter „Druckerverwaltungstools“. 5. Wählen Sie die gewünschten Optionen aus. ● Wählen Sie auf der Registerkarte Layout die Orientierung Portrait oder Querformat aus.
● Dicke, unregelmäßige oder wellige Kanten ● Bereiche, die geknittert, abgerissen oder auf andere Art beschädigt sind Legen Sie in den Drucker nur Umschläge ein, deren Kanten fest gefaltet sind. HINWEIS: Weitere Informationen zum Drucken auf Briefumschlägen finden Sie in der Dokumentation, die mit dem verwendeten Softwareprogramm geliefert wird. So bedrucken Sie Umschläge (Windows) 1. Legen Sie Briefumschläge in das Fach ein. Weitere Informationen hierzu finden Sie unter Einlegen von Papier. 2.
a. Wählen Sie im Einblendmenü Papierformat das gewünschte Umschlagformat aus. HINWEIS: Wenn Sie das Papierformat ändern, müssen Sie sicherstellen, dass das korrekte Papierformat eingelegt ist. Anschließend stellen Sie das entsprechende Papierformat über das Bedienfeld des Druckers ein. b. 5. Wählen Sie im Einblendmenü die Option Papiertyp/Qualität aus. Vergewissern Sie sich, dass der Papiertyp auf Normalpapier eingestellt ist. Klicken Sie auf Drucken.
6. Klicken Sie auf OK, um zum Dialogfenster Eigenschaften zurückzukehren. 7. Klicken Sie auf OK und anschließend im Dialogfenster Drucken auf Drucken oder OK. HINWEIS: Nehmen Sie nach dem Drucken nicht verwendetes Fotopapier aus dem Zufuhrfach heraus. Bewahren Sie das Fotopapier so auf, dass es sich nicht wellt, um eine stets hohe Druckqualität zu erhalten. So drucken Sie Fotos vom Computer aus (OS X) 1. Legen Sie Papier in das Fach ein. Weitere Informationen finden Sie unter Einlegen von Papier. 2.
1. Setzen Sie das USB-Flash-Laufwerk in den vorderen USB-Anschluss ein. 2. Tippen Sie auf dem Bedienfelddisplay auf Fotos drucken. 3. Tippen Sie auf dem Bedienfelddisplay auf Anzeigen und drucken, um Fotos anzuzeigen. 4. Wählen Sie auf dem Druckerdisplay das zu druckende Foto aus und tippen Sie dann auf Weiter. 5. Blättern Sie nach oben bzw. nach unten, um die Anzahl der zu druckenden Fotos anzugeben. 6.
1. Legen Sie das entsprechende Papier in das Fach ein. Weitere Informationen hierzu finden Sie unter Einlegen von Papier. 2. Klicken Sie in Ihrem Softwareprogramm im Menü Datei auf die Option Drucken. 3. Stellen Sie sicher, dass Ihr Drucker ausgewählt wurde. 4. Klicken Sie auf die Schaltfläche zum Öffnen des Dialogfensters Eigenschaften. Je nach Softwareprogramm heißt diese Schaltfläche Eigenschaften, Optionen, Druckereinrichtung, Druckereigenschaften, Drucker oder Voreinstellungen.
3. Stellen Sie sicher, dass Ihr Drucker ausgewählt wurde. Wenn keine Optionen im Dialogfenster „Drucken“ angezeigt werden, klicken Sie auf Details einblenden. 4. Wählen Sie im Einblendmenü ein Papierformat aus. Wenn im Dialogfenster Drucken kein Einblendmenü Papierformat angezeigt wird, klicken Sie auf die Schaltfläche Seiteneinrichtung. Nach dem Auswählen des Papierformats klicken Sie auf OK, um das Dialogfenster Seiteneinrichtung zu schließen und zum Dialogfenster Drucken zurückzukehren.
HINWEIS: Wenn Sie das Papierformat ändern, müssen Sie sicherstellen, dass das korrekte Papierformat eingelegt ist. Anschließend stellen Sie das entsprechende Papierformat über das Bedienfeld des Druckers ein. Informationen zu weiteren Druckoptionen finden Sie unter Tipps für erfolgreiches Drucken. 5. Klicken Sie zum Drucken auf OK. So drucken Sie auf beiden Papierseiten (OS X) 1. Klicken Sie im Menü Ablage Ihrer Software auf Drucken. 2.
So drucken Sie mit maximaler Auflösung (in dpi) (OS X) 1. Klicken Sie im Menü Ablage Ihrer Software auf Drucken. 2. Stellen Sie sicher, dass Ihr Drucker ausgewählt wurde. 3. Stellen Sie die Druckoptionen ein. Wenn keine Optionen im Dialogfenster „Drucken“ angezeigt werden, klicken Sie auf Details einblenden. HINWEIS: Die folgenden Optionen sind für Ihren Drucker verfügbar. Die Position der Optionen kann je nach Programm variieren. a.
Weitere Informationen hierzu finden Sie unter Überprüfen der geschätzten Tintenfüllstände. HINWEIS: Wenn eine Warnung in Bezug auf einen niedrigen Tintenfüllstand angezeigt wird, sollten Sie eine Ersatzpatrone bereithalten, um mögliche Verzögerungen beim Druck zu vermeiden. Sie müssen die Patronen erst auswechseln, wenn die Druckqualität nicht mehr ausreichend ist. ● Schalten Sie den Drucker immer über werden können.
HINWEIS: In der Vorschau auf der Registerkarte Layout kann die von Ihnen getroffene Auswahl in den Dropdown-Listen Mehrfachseitenlayout, Broschüre oder Seitenränder nicht widergespiegelt werden. ◦ In Graustufen drucken: Ermöglicht Ihnen ein Schwarzweißdokument ausschließlich mit schwarzer Tinte zu drucken. Wählen Sie Nur schwarze Tinte aus und klicken Sie anschließend auf OK.
Tipps zu den Druckereinstellungen (OS X) ● Wählen Sie im Dialogfenster „Drucken“ im Einblendmenü Papierformat das Format des in den Drucker eingelegten Papiers aus. ● Wählen Sie im Dialogfenster „Drucken“ das Einblendmenü Papier/Qualität und dann den geeigneten Papiertyp und die gewünschte Qualität aus. ● Soll ein Dokument in Schwarzweiß nur mit schwarzer Tinte gedruckt werden, wählen Sie im Einblendmenü die Option Papiertyp/Qualität aus.
4 Kopieren und scannen ● Kopieren ● Scannen Kopieren So kopieren Sie Dokumente: 1. Stellen Sie sicher, dass sich im Hauptpapierfach Papier befindet. Weitere Informationen finden Sie unter Einlegen von Papier. 2. Legen Sie das Original mit der bedruckten Seite nach unten auf das Scannerglas oder mit der bedruckten Seite nach oben in den Vorlageneinzug. Weitere Informationen finden Sie unter Auflegen von Originalen auf das Scannerglas oder Einlegen von Originalen in den Vorlageneinzug. 3.
Scannen Sie können Dokumente, Fotos und weitere Papiertypen scannen und an verschiedene Ziele wie einen Ordner auf einem Computer oder einen E-Mail-Empfänger senden. Wenn Sie Dokumente mit der HP Druckersoftware scannen, können Sie in einem Format scannen, das sich durchsuchen und bearbeiten lässt. Wenn Sie ein randloses Original scannen, verwenden Sie das Scannerglas und nicht den Vorlageneinzug. HINWEIS: Einige Scanfunktionen stehen erst nach der Installation der HP Druckersoftware zur Verfügung.
So scannen Sie ein Original über das Bedienfeld des Druckers 1. Legen Sie das Original mit der bedruckten Seite nach unten auf das Scannerglas oder mit der bedruckten Seite nach oben in den Vorlageneinzug ein. Weitere Informationen finden Sie unter Auflegen von Originalen auf das Scannerglas oder Einlegen von Originalen in den Vorlageneinzug. 2. Tippen Sie auf Scannen, und wählen Sie dann Computer aus. 3. Tippen Sie auf den Computer, an den der Scan gesendet werden soll. 4.
Scannen auf ein Speichergerät Sie können über das Druckerbedienfeld direkt auf ein USB-Flash-Laufwerk scannen, ohne hierfür einen Computer oder die HP Druckersoftware im Lieferumfang des Druckers zu benötigen. HINWEIS: Sie können auch die HP Druckersoftware verwenden, um Dokumente als bearbeitbaren Text zu scannen. Weitere Informationen finden Sie unter Scannen von Dokumenten als bearbeitbarer Text. So scannen Sie ein Original über das Druckerbedienfeld auf ein Speichergerät: 1.
9. Wählen Sie den Scantyp aus, indem Sie auf Foto oder Dokument tippen. 10. Wählen Sie für Fotos die Scaneinstellungen aus und tippen Sie auf Weiter. Fahren Sie bei Dokumenten mit dem nächsten Schritt fort. 11. Überprüfen Sie die E-Mail-Daten und tippen Sie auf Weiter. 12. Tippen Sie auf An E-Mail scannen. 13. Tippen Sie nach Abschluss des Scanvorgangs auf OK. Tippen Sie dann auf Ja, um eine weitere E-Mail zu senden, oder auf Nein, um die Anwendung zu schließen.
● PIN ändern ● Konto löschen Scannen mithilfe von Webscan Webscan ist eine Funktion des eingebetteten Webservers, mit der Sie Fotos und Dokumente mithilfe eines Webbrowsers mit Ihrem Drucker scannen und auf Ihrem Computer verwenden können. Diese Funktion ist auch dann verfügbar, wenn die Druckersoftware nicht auf dem Computer installiert wurde. Weitere Informationen finden Sie unter Eingebetteter Webserver. HINWEIS: Standardmäßig ist Webscan ausgeschaltet.
● Scannen von Dokumenten als bearbeitbaren Text ● Richtlinien zum Scannen von Dokumenten als editierbaren Text Scannen von Dokumenten als bearbeitbaren Text Beachten Sie die folgenden Richtlinien, wenn Sie Dokumente als editierbaren Text scannen. So scannen Sie Dokumente als bearbeitbaren Text (Windows) 1. Legen Sie das Original mit der bedruckten Seite nach unten auf das Scannerglas oder mit der bedruckten Seite nach oben in den Vorlageneinzug ein.
3. Klicken Sie auf die Schaltfläche Scannen. Sie werden in einem Dialogfenster aufgefordert, das Scangerät und die voreingestellten Scaneinstellungen zu bestätigen. 4. Befolgen Sie zum Fertigstellen des Scanvorgangs die angezeigten Anweisungen. 5. Nachdem alle Seiten gescannt wurden, wählen Sie im Menü Ablage die Option Sichern aus. Das Dialogfenster „Sichern“ wird angezeigt. 6. Wählen Sie den Typ des bearbeitbaren Textes aus. 7. Druckanforderung...
Vergewissern Sie sich, dass Sie eine Verknüpfung oder eine Voreinstellung auswählen, die das Scannen als bearbeitbaren Text ermöglicht. Bei diesen Optionen werden Scaneinstellungen verwendet, die Sie eine bestmögliche Qualität für den OCR-Scan erzielen lassen. Windows: Verwenden Sie die Verknüpfung Bearbeitbarer Text (OCR) oder Als PDF speichern. OS X: Verwenden Sie die Voreinstellung Dokumente. ● Speichern Sie die Datei im richtigen Format.
5 Fax Sie können mit dem Drucker Faxnachrichten (auch in Farbe) senden und empfangen. Sie können das Senden von Faxnachrichten für einen späteren Zeitpunkt planen und Telefonbuchkontakte einrichten, um Faxnachrichten schnell und einfach an häufig verwendete Nummern zu senden. Über das Bedienfeld des Druckers können Sie verschiedene Faxoptionen einstellen, z. B. Auflösung und Kontrast zwischen hellen und dunklen Bereichen der zu sendenden Faxnachricht.
So senden Sie eine Standard-Faxnachricht über das Bedienfeld des Druckers: 1. Legen Sie das Original mit der bedruckten Seite nach unten auf das Scannerglas oder mit der bedruckten Seite nach oben in den Vorlageneinzug ein. Weitere Informationen finden Sie unter Auflegen von Originalen auf das Scannerglas oder Einlegen von Originalen in den Vorlageneinzug. 2. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Faxen. 3. Tippen Sie auf Jetzt senden. 4.
4. Geben Sie eine Faxnummer oder einen Namen aus der Liste mit Ihren Kontakten ein, für den bereits eine Faxnummer eingetragen ist. 5. Nach dem Eingeben der Faxdaten klicken Sie auf Faxen. Senden einer Faxnachricht von einem Telefon aus Sie können Faxnachrichten über Ihre Nebenstellenanlage senden. Auf diese Weise können Sie mit dem beabsichtigten Empfänger sprechen, bevor Sie das Fax senden. So senden Sie eine Faxnachricht von einem Nebenstellentelefon aus 1.
So senden Sie eine Faxnachricht unter Verwendung der Wahlüberwachung über das Bedienfeld des Druckers: 1. Legen Sie das Original mit der bedruckten Seite nach unten auf das Scannerglas oder mit der bedruckten Seite nach oben in den Vorlageneinzug ein. Weitere Informationen finden Sie unter Auflegen von Originalen auf das Scannerglas oder Einlegen von Originalen in den Vorlageneinzug. 2. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Faxen. 3. Tippen Sie auf Neues Fax senden. 4.
6. Geben Sie die Faxnummer über das Tastenfeld ein. Tippen Sie auf (Telefonbuch), um einen Telefonbuchkontakt oder eine zuvor gewählte Nummer oder Nummer eines empfangenen Anrufs auszuwählen. 7. Tippen Sie auf Schwarzweiß. Der Drucker scannt die Originale in den Speicher und sendet das Fax, wenn das empfangende Faxgerät verfügbar ist.
So aktivieren oder deaktivieren Sie den Fehlerkorrekturmodus über das Bedienfeld: 1. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Einrichtung. 2. Tippen Sie auf Faxeinrichtung. 3. Tippen Sie auf Voreinstellungen. 4. Tippen Sie zum Ein- oder Ausschalten auf Fehlerkorrekturmodus. 5. Wählen Sie Ein oder Aus aus. Empfangen einer Faxnachricht Faxnachrichten können automatisch oder manuell empfangen werden. Wenn Sie die Option Autom.
4. Wenn Sie mit dem Absender telefonieren, bitten Sie ihn, an seinem Faxgerät Start zu drücken. 5. Wenn Sie Faxtöne von einem sendenden Faxgerät hören, gehen Sie folgendermaßen vor: a. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Faxen, Senden und empfangen und dann auf Jetzt empfangen. b. Nachdem der Faxempfang vom Drucker gestartet wurde, können Sie den Hörer auflegen oder in der Leitung bleiben. Die Telefonleitung kann während der Faxübertragung nicht verwendet werden.
In Abhängigkeit von der Größe der Faxe im Speicher können Sie bis zu 30 der zuletzt empfangenen Faxe erneut drucken, wenn sie sich noch im Speicher befinden. Dies ist beispielsweise hilfreich, wenn der letzte Ausdruck verloren gegangen ist. So drucken Sie Faxe aus dem Speicher erneut über das Bedienfeld des Druckers: 1. Stellen Sie sicher, dass sich im Hauptpapierfach Papier befindet. Weitere Informationen finden Sie unter Einlegen von Papier. 2.
Einstellen der automatischen Verkleinerung für eingehende Faxe Die Einstellung Automatische Verkleinerung bestimmt, wie der Drucker vorgeht, wenn ein Fax empfangen wird, das für das eingelegte Papierformat zu groß ist. Diese Einstellung ist standardmäßig aktiviert. Die eingehende Faxnachricht wird bei dieser Einstellung so verkleinert, dass sie möglichst auf eine Seite passt. Wenn diese Funktion deaktiviert ist, werden die Daten, die nicht auf die erste Seite passen, auf eine zweite Seite gedruckt.
So entfernen Sie Nummern aus der Junk-Fax-Liste Wenn eine Faxnummer nicht mehr blockiert werden soll, können Sie diese aus der Junk-Fax-Liste entfernen. 1. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Einrichtung. 2. Tippen Sie auf Faxeinrichtung. 3. Tippen Sie auf Voreinstellungen. 4. Tippen Sie auf Junk-Fax-Sperre. 5. Tippen Sie auf die zu entfernende Nummer und anschließend auf Entfernen. So drucken Sie eine Junk-Fax-Liste 1.
Aktivieren von HP Digitales Fax So richten Sie HP Digitales Fax ein (Windows) 1. Öffnen Sie die HP Druckersoftware. Weitere Informationen finden Sie unter Öffnen der HP Druckersoftware (Windows). 2. Klicken Sie auf Drucken, Scannen und Faxen und Einrichtungsassistent für digitales Faxen. 3. Befolgen Sie die angezeigten Anweisungen. So richten Sie HP Digitales Fax ein (OS X) 1. Öffnen Sie das HP Dienstprogramm. Weitere Informationen finden Sie unter HP Dienstprogramm (OS X). 2.
Ausschalten von HP Digitales Fax 1. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Einrichtung. 2. Tippen Sie auf Faxeinrichtung. 3. Tippen Sie auf Voreinstellungen und dann auf HP Digitales Fax. 4. Tippen Sie auf HP Digitales Fax ausschalten. 5. Tippen Sie auf Ja. Einrichten von Telefonbuchkontakten Für häufig verwendete Faxnummern können Sie Telefonbuchkontakte einrichten. Dies ermöglicht das schnelle Wählen der Nummern über das Bedienfeld des Druckers.
So ändern Sie Telefonbuchkontakte 1. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Faxen. 2. Tippen Sie auf Jetzt senden. 3. Tippen Sie auf 4. Tippen Sie auf 5. Tippen Sie auf 6. Tippen Sie auf den zu bearbeitenden Telefonbuchkontakt. 7. Tippen Sie auf Name und bearbeiten Sie den Namen für den Telefonbuchkontakt. Tippen Sie dann auf Fertig. 8. Tippen Sie auf Faxnummer und bearbeiten Sie die Faxnummer für den Telefonbuchkontakt. Tippen Sie dann auf Fertig. (Telefonbuch).
5. Tippen Sie auf 6. Tippen Sie auf den zu bearbeitenden Gruppen-Telefonbuchkontakt. 7. Tippen Sie auf Name und bearbeiten Sie den Namen für den Gruppen-Telefonbuchkontakt. Tippen Sie dann auf Fertig. 8. Tippen Sie auf Anzahl Mitglieder. 9. Wählen Sie die Telefonbuchkontakte aus, die aus der Gruppe entfernt werden sollen, oder (Pluszeichen), um einen Kontakt zur Gruppe hinzuzufügen. tippen Sie auf (Bearbeiten), um eine Gruppe zu bearbeiten. 10. Tippen Sie auf Fertig.
● Einstellen der Wahlwiederholungsoptionen ● Einstellen der Faxgeschwindigkeit ● Einstellen der Lautstärke für Faxtöne Einrichten der Faxkopfzeile Mit der Faxkopfzeile werden Ihr Name und Ihre Faxnummer oben auf jedes gesendete Fax gedruckt. HP empfiehlt, dass Sie die Faxkopfzeile in der mit dem Drucker gelieferten HP Software einrichten. Sie können die Faxkopfzeile jedoch auch wie hier beschrieben über das Bedienfeld des Druckers einrichten.
dem Drucker entgegennehmen soll. Die Anzahl der Ruftöne bis zur Entgegennahme eines Anrufs müssen für den Drucker also höher sein als für den Anrufbeantworter. Stellen Sie den Anrufbeantworter auf eine niedrigere Ruftonanzahl und den Drucker auf die maximal unterstützte Ruftonanzahl ein. (Die maximale Ruftonanzahl variiert je nach Land/Region.) In diesem Fall nimmt der Anrufbeantworter eingehende Anrufe entgegen, wobei der Drucker die Leitung auf Faxtöne überwacht.
● Tippen Sie auf das Ruftonmuster, das Ihre Telefongesellschaft für Faxanrufe zugeordnet hat. ● Tippen Sie auf Ruftonmustererkennung, und befolgen Sie danach die Anweisungen auf dem Bedienfeld des Druckers. HINWEIS: Falls das Ruftonmuster nicht erkannt werden konnte oder wenn Sie die Erkennungsfunktion unterbrechen, wird das Ruftonmuster automatisch auf die Standardeinstellung Alle Ruftöne gesetzt.
3. Tippen Sie auf Automatisch neu wählen. 4. Tippen Sie auf Wahlwiederh. wenn besetzt, Keine Verb.: Wahlwiederholung oder Verbindungsproblem, Wahlwiederh. und wählen Sie dann die geeigneten Optionen aus. Einstellen der Faxgeschwindigkeit Sie können die Faxgeschwindigkeit für die Kommunikation des Druckers mit anderen Faxgeräten beim Senden und Empfangen einstellen.
● DSL: DSL-Dienst Ihrer Telefongesellschaft. (DSL wird in Ihrem Land/Ihrer Region möglicherweise als ADSL bezeichnet.) ● PBX: Nebenstellenanlage (PBX – Private Branch Exchange) ● ISDN: Diensteintegrierendes digitales Telekommunikationsnetz (Integrated Services Digital Network – ISDN) ● FoIP: Preiswerter Telefondienst, der es Ihnen ermöglicht, mit dem Drucker Faxnachrichten über das Internet zu senden und zu empfangen.
Verwenden von Berichten Sie können den Drucker so einrichten, dass er automatisch Fehlerberichte und Bestätigungsberichte für jedes Fax druckt, das Sie senden und empfangen. Bei Bedarf können Sie manuell Systemberichte drucken, die wertvolle Systeminformationen über den Drucker liefern. Standardmäßig ist der Drucker so eingestellt, dass nur dann ein Bericht gedruckt wird, wenn beim Senden oder Empfangen von Faxnachrichten ein Problem auftritt.
Aus Wenn Sie Faxe erfolgreich senden und empfangen, wird kein Bestätigungsbericht gedruckt. Dies ist die Standardeinstellung. Ein (Faxversand) Für jede von Ihnen gesendete Faxnachricht wird ein Bestätigungsbericht gedruckt. Ein (Faxempfang) Für jede von Ihnen empfangene Faxnachricht wird ein Bestätigungsbericht gedruckt. Ein (Faxversand und empfang) Für jede von Ihnen gesendete und empfangene Faxnachricht wird ein Bestätigungsbericht gedruckt. So übernehmen Sie ein Bild eines Fax in den Bericht: 1.
Entfernen der Daten aus dem Faxprotokoll Beim Löschen des Faxprotokolls werden auch alle im Speicher abgelegten Faxnachrichten gelöscht. So löschen Sie das Faxprotokoll: 1. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Einrichtung. 2. Tippen Sie auf Faxeinrichtung und dann auf Extras. 3. Tippen Sie auf Faxprotokoll löschen. Drucken der Details der letzten Faxtransaktion Der Bericht zur letzten Faxtransaktion enthält die Details der letzten auszuführenden Faxtransaktion.
6 Webdienste Der Drucker verfügt über innovative webfähige Lösungen, mit denen Sie schnell auf das Internet zugreifen, Dokumente abrufen und schneller und einfacher drucken können – ohne dazu einen Computer zu benutzen. HINWEIS: Um diese Webfunktionen zu verwenden, muss der Drucker mit dem Internet verbunden sein (über ein Ethernet-Kabel oder eine Wireless-Verbindung). Die Webfunktionen sind nicht verfügbar, wenn der Drucker über ein USB-Kabel angeschlossen ist.
Einrichten der Webdienste Damit Sie die Webdienste einrichten können, müssen Sie sich zunächst vergewissern, dass Ihr Drucker mit dem Internet verbunden ist (Ethernet oder wireless). Verwenden Sie eine der folgenden Methoden, um die Webdienste einzurichten. So richten Sie die Webdienste über das Bedienfeld des Druckers ein 1. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Einrichtung. 2. Tippen Sie auf Webdienste – Einr.. 3.
So richten Sie die Webdienste mithilfe der HP Druckersoftware ein (Windows) 1. Öffnen Sie die HP Druckersoftware. Weitere Informationen finden Sie unter Öffnen der HP Druckersoftware (Windows). 2. Doppelklicken Sie im daraufhin angezeigten Fenster auf Drucken, Scannen und Faxen und wählen Sie dann unter „Drucken“ die Option Drucker mit dem Internet verbinden aus. Die Startseite des Druckers (der eingebettete Webserver) wird geöffnet. 3. Klicken Sie auf die Registerkarte Webdienste. 4.
So drucken Sie Dokumente mithilfe von HP ePrint 1. Öffnen Sie auf dem Computer oder dem mobilen Gerät Ihre E-Mail-Anwendung. 2. Verfassen Sie eine neue E-Mail-Nachricht und hängen Sie die zu druckende Datei an die E-Mail an. 3. Geben Sie die E-Mail-Adresse des Druckers in die Zeile „An“ der E-Mail-Nachricht ein. Wählen Sie dann die Option zum Senden der E-Mail-Nachricht aus. HINWEIS: Geben Sie keine weiteren E-Mail-Adressen in die anderen Felder („An“ oder „Cc“) ein.
Ausschalten von HP Drucksachen 1. Tippen Sie auf dem Bedienfeld des Druckers auf (HP ePrint) und dann auf (Webdienste – Einst.). 2. Tippen Sie auf HP Drucksachen und dann auf Aus. HINWEIS: Weitere Informationen zum Entfernen der Webdienste finden Sie unter Entfernen der Webdienste. Entfernen der Webdienste Führen Sie die folgenden Schritte aus, um die Webdienste zu entfernen: 1. Tippen Sie auf dem Bedienfeld des Druckers auf (HP ePrint), und dann auf (Webdienste – Einst.). 2.
7 Arbeiten mit Tintenpatronen Dieser Abschnitt behandelt folgende Themen: ● Informationen zu Tintenpatronen und zum Druckkopf ● Überprüfen der geschätzten Tintenfüllstände ● Auswechseln der Tintenpatronen ● Bestellen von Tintenpatronen ● Lagerung von Verbrauchsmaterial ● Speicher für anonyme Nutzungsdaten ● Informationen zu den Garantiebedingungen für Tintenpatronen Informationen zu Tintenpatronen und zum Druckkopf Die folgenden Tipps tragen dazu bei, schonend mit HP Tintenpatronen umzugehen
Überprüfen der geschätzten Tintenfüllstände Sie können den ungefähren Tintenfüllstand entweder mit der Druckersoftware oder über das Bedienfeld des Druckers überprüfen. Informationen zum Verwenden der Druckersoftware finden Sie unter „Druckerverwaltungstools“. Diese Informationen erhalten Sie ebenfalls, wenn Sie den Druckerstatusbericht drucken (siehe Druckerstatusbericht).
2. Öffnen Sie die Zugangsklappe zu den Tintenpatronen. HINWEIS: Warten Sie, bis der Patronenwagen zum Stillstand kommt, bevor Sie fortfahren. 72 3. Drücken Sie auf die Vorderseite der Tintenpatrone, um sie frei zu geben, und nehmen Sie diese anschließend aus der Halterung. 4. Nehmen Sie die neue Tintenpatrone aus der Verpackung.
5. Schieben Sie die Tintenpatrone unter Beachtung der farbigen Kennzeichnungen in die jeweilige leere Halterung, bis sie fest in der Halterung einrastet. Stellen Sie sicher, dass Sie die Tintenpatrone in die Halterung mit demselben farbigen Buchstaben einsetzen. 6. Wiederholen Sie die Schritte 3 bis 5 für alle auszuwechselnden Tintenpatronen. 7. Schließen Sie die Zugangsklappe zu den Tintenpatronen. Bestellen von Tintenpatronen Rufen Sie www.hp.com auf, um Tintenpatronen zu bestellen.
Lagerung von Verbrauchsmaterial ● Bewahren Sie alle Tintenpatronen bis zur Verwendung in der versiegelten Originalverpackung auf. ● Tintenpatronen können auch über einen längeren Zeitraum im Drucker verbleiben. Achten Sie jedoch darauf, den Drucker stets korrekt auszuschalten, um den optimalen Zustand der Tintenpatronen sicherzustellen. Weitere Informationen hierzu finden Sie unter Ausschalten des Druckers. ● Bewahren Sie die Tintenpatronen bei Raumtemperatur auf (15 bis 35 °C oder 59 bis 95 °F).
Informationen zu den Garantiebedingungen für Tintenpatronen Die Gewährleistung für die HP Patronen gilt, wenn das Produkt im zugehörigen HP Druckgerät eingesetzt wird. Diese Gewährleistung umfasst keine HP Tintenprodukte, die wieder aufgefüllt, wieder verwertet, wieder aufbereitet, falsch verwendet oder an denen Änderungen vorgenommen wurden. Während des Garantiezeitraums gilt die Garantie für das Produkt, solange die HP Tinte nicht aufgebraucht und das Ende der Garantiefrist nicht erreicht wurde.
8 Netzwerkeinrichtung Zusätzliche erweiterte Einstellungen sind über die Startseite des Druckers verfügbar (eingebetteter Webserver oder EWS). Weitere Informationen hierzu finden Sie unter Eingebetteter Webserver.
nach. Wenn Sie diese Angaben weiterhin nicht finden, fragen Sie Ihren Netzwerkadministrator oder die Person, von der das Wireless-Netzwerk eingerichtet wurde. Einrichten des Druckers im Wireless-Netzwerk Verwenden Sie den Wireless-Einrichtungsassistenten über das Bedienfelddisplay des Druckers, um die Wireless-Kommunikation einzurichten. HINWEIS: Gehen Sie, bevor Sie fortfahren, die Liste unter Vorbereitungen durch. 1. Tippen Sie auf dem Bedienfeld des Druckers auf Einrichtung. 2.
● Windows 8.1: Klicken Sie auf der Startanzeige links unten auf den Pfeil nach unten, wählen Sie den Druckernamen aus und klicken Sie dann auf Dienstprogramme. ● Windows 8: Klicken Sie mit der rechten Maustaste auf einen leeren Bereich der Startanzeige. Klicken Sie in der App-Leiste auf Alle Apps, wählen Sie den Druckernamen aus und klicken Sie dann auf Dienstprogramme. ● Windows 7, Windows Vista und Windows XP: Klicken Sie auf dem Desktop des Computers auf Start und wählen Sie Alle Programme aus.
Ein- oder Ausschalten der Wireless-Funktionen des Druckers Wenn die blaue Wireless-LED auf dem Bedienfeld des Druckers leuchtet, sind die WirelessFunktionen des Druckers eingeschaltet. HINWEIS: Beim Anschließen eines Ethernet-Kabels werden die Wireless-Funktionen und die Wireless-LED vom Drucker automatisch ausgeschaltet. 1. Tippen Sie auf dem Bedienfeld des Druckers auf Einrichtung und dann auf Netzwerkeinrichtung. 2. Tippen Sie auf Wireless-Einst. 3.
1. Tippen Sie auf dem Bedienfeld des Druckers auf Einrichtung und dann auf Netzwerkeinrichtung. 2. Tippen Sie auf Ethernet-Einstellungen oder Wireless-Einst. 3. Tippen Sie auf Erweiterte Einstellungen. 4. Tippen Sie auf IP-Einstellungen. 5. Sie werden in einer Meldung gewarnt, dass bei Änderung der IP-Adresse der Drucker aus dem Netzwerk entfernt wird. Tippen Sie zum Fortfahren auf OK. 6. Standardmäßig wird Automatisch ausgewählt.
So schalten Sie HP Drahtlos direkt ein 1. Tippen Sie auf dem Bedienfeld des Druckers auf 2. Tippen Sie bei HP Drahtlos direkt auf Ein. (HP Drahtlos direkt). TIPP: Soll der Druck mit HP Drahtlos direkt mit erhöhter Sicherheit verwendet werden und wird vom Computer oder vom mobilen Gerät WPA2-Verschlüsselung unterstützt, tippen Sie auf Sicherheit, um die Sicherheitsfunktionen zu aktivieren oder zu deaktivieren.
die beiden Sternchen ** für zwei eindeutige Zeichen, die den Drucker kennzeichnen, und XXXX für das auf dem Drucker angegebene Druckermodell.) Wenn HP Drahtlos direkt mit Sicherheitsfunktionen eingeschaltet wurde, geben Sie nach der entsprechenden Eingabeaufforderung das Kennwort ein. 4. Fahren Sie mit Schritt 5 fort, wenn der Drucker über ein Wireless-Netzwerk installiert und mit dem Computer verbunden wurde.
Klicken Sie hier, um auf die Online-Fehlerbehebung für HP Drahtlos direkt oder weitere Hilfe zum Einrichten von HP Drahtlos direkt zuzugreifen. Zurzeit ist die Website ggf. nicht in allen Sprachen verfügbar.
9 Druckerverwaltungstools Dieser Abschnitt behandelt folgende Themen: ● Toolbox (Windows) ● HP Dienstprogramm (OS X) ● Eingebetteter Webserver Toolbox (Windows) Mit der Toolbox können Sie auf Wartungsinformationen zum Drucker zugreifen. HINWEIS: Die Toolbox kann von der HP Software-CD installiert werden, wenn der Computer die Systemanforderungen erfüllt. Die Systemanforderungen finden Sie in der Readme-Datei, die über die mit dem Drucker gelieferte CD mit der HP Druckersoftware verfügbar ist.
Eingebetteter Webserver Wenn der Drucker mit einem Netzwerk verbunden ist, können Sie mit dem eingebetteten Webserver (EWS) des Druckers Statusinformationen anzeigen, Einstellungen ändern und den Drucker von Ihrem Computer aus verwalten. HINWEIS: Zum Anzeigen oder Ändern bestimmter Einstellung benötigen Sie möglicherweise ein Kennwort. HINWEIS: Sie können den eingebetteten Webserver öffnen und verwenden, ohne dass eine Verbindung zum Internet besteht.
So öffnen Sie den eingebetteten Webserver über ein Netzwerk 1. Suchen Sie die IP-Adresse oder den Hostnamen des Druckers auf der Netzwerkkonfigurationsseite. Weitere Informationen hierzu finden Sie unter Netzwerkkonfigurationsseite. 2. Geben Sie in einem unterstützten Webbrowser auf Ihrem Computer die IP-Adresse oder den Hostnamen ein, die/der dem Drucker zugeordnet wurde. Wenn die IP-Adresse beispielsweise 123.123.123.123 lautet, geben Sie folgende Adresse in den Webbrowser ein: http://123.123.123.123.
Überprüfen des Webbrowsers ● Stellen Sie sicher, dass der Webbrowser den minimalen Systemanforderungen entspricht. Weitere Informationen zu den Systemanforderungen finden Sie in der Readme-Datei für den Drucker auf der CD mit der HP Druckersoftware. ● Wenn von Ihrem Webbrowser Proxy-Einstellungen zum Verbinden mit dem Internet verwendet werden, deaktivieren Sie diese Einstellungen. Weitere Informationen finden Sie in der Dokumentation zu Ihrem Webbrowser.
10 Beheben von Problemen Die Informationen in diesem Kapitel bieten Lösungen für gängige Probleme. Wenn der Drucker nicht einwandfrei funktioniert und sich das Problem nicht mithilfe dieser Vorschläge lösen lässt, nutzen Sie einen der unter HP Support aufgeführten Support-Dienste, um weitere Hilfe zu erhalten.
1. Schlagen Sie in der mit dem Drucker gelieferten Dokumentation nach. 2. Besuchen Sie die Website des HP Onlinesupports unter www.hp.com/support. Der HP Onlinesupport steht allen Kunden von HP zur Verfügung. Unsere Kunden erhalten hier immer die neuesten Produktinformationen und Hilfestellung von unseren erfahrenen Experten: 3.
Hinweise vor dem Anruf bei der Kundenunterstützung Rufen Sie den HP Support an, wenn Sie sich am Computer und dem damit verbundenen Drucker befinden.
● Druckerstatusbericht ● Netzwerkkonfigurationsseite ● Druckqualitätsbericht ● Wireless-Testbericht ● Webzugriffsbericht Druckerstatusbericht Der Druckerstatusbericht enthält aktuelle Informationen über den Drucker und den Status der Tintenpatronen. Der Druckerstatusbericht unterstützt Sie auch bei der Behebung von Problemen mit dem Drucker. Außerdem umfasst der Druckerstatusbericht ein Protokoll der letzten Ereignisse.
3. Tintenausgabe – Systeminformationen: Zeigt die geschätzten Tintenfüllstände (als Grafik), die Teilenummern und den Ablauf der Garantie für die Tintenpatronen an. HINWEIS: Die Warnungen und Hinweise in Bezug auf die Tintenfüllstände sind lediglich Schätzwerte, die der besseren Planung dienen. Wenn eine Warnung in Bezug auf einen niedrigen Tintenfüllstand angezeigt wird, sollten Sie eine Ersatzpatrone bereithalten, um mögliche Verzögerungen beim Druck zu vermeiden.
DEWW 1. Allgemeine Informationen: Zeigt Informationen zum aktuellen Status und aktiven Netzwerkverbindungstyp sowie die URL des eingebetteten Webservers an. 2. 802.3 Verkabelt: Zeigt Informationen zur aktiven Ethernet-Netzwerkverbindung an, z. B. IPAdresse, Subnetzmaske, Standard-Gateway und Hardwareadresse des Druckers. 3. 802.11 Wireless: Zeigt Informationen über die Wireless-Netzwerkverbindung an, z. B. Hostname, IP-Adresse, Subnetzmaske, Standardgateway und Server.
4. HP Drahtlos direkt: Zeigt Informationen über die Verbindung zu HP Drahtlos direkt an, z. B. Netzwerkname (SSID), IP-Adresse, Subnetzmaske, Standardgateway und Server. 5. Verschiedenes: Enthält Informationen zu erweiterten Netzwerkeinstellungen. ● Anschluss 9100: Der Drucker unterstützt den IP-Druck im Raw-Format über den TCPAnschluss 9100. Dieser proprietäre TCP/IP-Anschluss des Druckers ist der Standardanschluss zum Drucken.
Druckqualitätsbericht Druckqualitätsprobleme können viele Ursachen haben: Softwareeinstellungen, eine mangelhafte Bilddatei oder das Drucksystem selbst. Wenn Sie mit der Qualität der gedruckten Dokumente nicht zufrieden sind, können Sie eine Seite zur Druckqualitätsdiagnose drucken, um festzustellen, ob das Drucksystem korrekt funktioniert. So drucken Sie einen Druckqualitätsbericht: 1. Tippen Sie auf dem Bedienfeld des Druckers auf Einrichtung. 2. Tippen Sie auf Berichte. 3.
1. Falls die Farbbalken oder Muster im Druckqualitätsbericht ausgeblichen, unvollständig, streifig sind oder völlig fehlen, überprüfen Sie die Füllstände der Tintenpatronen und wechseln Sie die Patrone der betreffenden Farbe aus, deren Farbbalken oder Farbmuster fehlerhaft gedruckt wurde. Falls die Tinte in keiner Patrone aufgebraucht ist, nehmen Sie alle Tintenpatronen heraus und setzen sie wieder ein, um deren korrekte Installation sicherzustellen.
Beheben von Druckerproblemen TIPP: (Windows) Führen Sie den HP Print and Scan Doctor aus, um Probleme beim Drucken, Scannen und Kopieren automatisch diagnostizieren zu lassen. Die Anwendung ist ggf. nicht in allen Sprachen verfügbar. Der Drucker schaltet sich unerwartet aus ● Überprüfen Sie den Netzanschluss und die Netzkabel. ● Stellen Sie sicher, dass das Netzkabel fest mit einer funktionierenden Netzsteckdose verbunden ist.
legen Sie das Papier korrekt ein. Stellen Sie dabei sicher, dass die Papierführungen eng am Papier anliegen. ◦ ● Laden Sie während des Druckvorgangs kein Papier in den Drucker. Es werden mehrere Seiten gleichzeitig eingezogen ◦ Vergewissern Sie sich, dass die Papierquerführungen im Fach auf die korrekten Markierungen für das eingelegte Papierformat eingestellt sind. Kontrollieren Sie, ob die Papierquerführungen am Stapel anliegen, ohne dass sie dabei zu viel Druck ausüben.
LED zeigt an, dass ein Verbindungsproblem zwischen dem Drucker und dem Netzwerk besteht. Außerdem können Sie einen Wireless-Testbericht drucken, der Ihnen bei der Diagnose der Probleme hilft. ● Überprüfen der auf dem Computer installierten Firewallsoftware Eine Software-Firewall ist ein Sicherheitsprogramm, das den Computer vor unberechtigtem Zugriff schützt. Unter Umständen blockiert die Firewall aber auch die Kommunikation zwischen Computer und Drucker.
Druckqualität ist nicht zufriedenstellend 1. Stellen Sie sicher, dass Sie Original HP Tintenpatronen verwenden. Original HP Tintenpatronen wurden für HP Drucker entwickelt und getestet, sodass Sie immer hervorragende Druckergebnisse erzielen. HINWEIS: HP kann die Qualität und Zuverlässigkeit des Zubehörs und der Verbrauchsmaterialien von anderen Herstellern nicht garantieren.
Bewahren Sie Spezialdruckpapier in der Originalverpackung in einem wieder verschließbaren Kunststoffbeutel auf einer ebenen Fläche an einem kühlen, trockenen Ort auf. Entnehmen Sie zum Drucken nur die sofort benötigte Papiermenge. Legen Sie nicht verwendetes Fotopapier nach dem Drucken zurück in den Kunststoffbeutel. Dadurch wird verhindert, dass sich das Fotopapier wellt. 5. Klicken Sie zum Überprüfen der Druckeinstellungen auf die Schaltfläche zum Öffnen des Dialogfensters Eigenschaften.
Das Bild wird verkleinert ● Über das Bedienfeld wurde „Vergrößern/Verkleinern“ oder eine andere Kopierfunktion eingestellt, um das gescannte Bild zu verkleinern. Vergewissern Sie sich, dass Normalformat für den Kopierauftrag eingestellt ist. ● Ein verschmutztes Scannerglas kann sich negativ auf die Qualität des gescannten Bilds auswirken. Reinigen Sie das Scannerglas und die Unterseite der Abdeckung Weitere Informationen hierzu finden Sie unter Warten des Druckers.
Der Scanner funktioniert nicht ● Überprüfen des Originals Stellen Sie sicher, dass das Original richtig eingelegt wurde. Weitere Informationen finden Sie unter Auflegen von Originalen auf das Scannerglas oder Einlegen von Originalen in den Vorlageneinzug. ● Überprüfen des Druckers Der Drucker befand sich ggf. nach einer Inaktivitätsphase im Ruhemodus, wodurch sich die Verarbeitung leicht verzögert.
spezielle Aufgabe ausgeführt wird. Weitere Informationen zum Ändern der Eigenschaften finden Sie in der Onlinehilfe zur HP Druckersoftware. Der Text kann nicht bearbeitet werden ● Vergewissern Sie sich, dass das OCR-Programm (OCR – Optical Character Recognition) installiert ist: Führen Sie je nach Betriebssystem einen der folgenden Schritte aus: ◦ Windows 8.1: Klicken Sie auf der Startanzeige links unten auf den Pfeil nach unten, wählen Sie den Druckernamen aus und klicken Sie dann auf Dienstprogramme.
Die Qualität des eingescannten Bildes ist schlecht ● Text oder Bilder von der Rückseite eines beidseitig bedruckten Originals werden im gescannten Bild angezeigt Bei beidseitig bedruckten Originalen können auf der Rückseite gedruckte Texte oder Bilder auf dem gescannten Bild erscheinen, wenn die Originale auf Papier gedruckt sind, das zu dünn oder transparent ist.
Einige E-Mail-Server sind so konfiguriert, dass E-Mail-Nachrichten oberhalb einer festgelegten Größe abgewiesen werden. Ermitteln Sie anhand der Dokumentation Ihres E-Mail-Anbieters, ob Ihr E-Mail-Server eine Begrenzung der Dateigröße besitzt. Falls der E-Mail-Server eine solche Größenbeschränkung besitzt, ändern Sie die maximale Größe von E-Mail-Anhängen für das Profil für ausgehende E-Mails in einen kleineren Wert als denjenigen des E-Mail-Servers.
Der „Faxhardwaretest“ schlägt fehl ● Schalten Sie den Drucker über (Netz) auf dem Bedienfeld des Druckers aus und ziehen Sie anschließend das Netzkabel an der Rückseite des Druckers ab. Schließen Sie das Netzkabel nach einigen Sekunden wieder an und schalten Sie den Drucker ein. Führen Sie den Test erneut durch. Wenn der Test erneut fehlschlägt, lesen Sie die weiteren Fehlerbehebungsinformationen in diesem Abschnitt. ● Versuchen Sie, eine Textfaxnachricht zu senden oder zu empfangen.
● Schließen Sie ein funktionsfähiges Telefon über das korrekte Telefonkabel an die Telefonsteckdose an, die Sie für den Drucker verwenden, und überprüfen Sie, ob ein Wählton zu hören ist. Wenn Sie keinen Wählton hören, wenden Sie sich an Ihre Telefongesellschaft, und lassen Sie die Leitung überprüfen. ● Versuchen Sie, eine Textfaxnachricht zu senden oder zu empfangen. Wenn das Fax erfolgreich gesendet bzw. empfangen wird, liegt möglicherweise kein Problem vor.
Der Test „Verwendung eines korrekten Telefonkabels mit dem Faxgerät“ schlägt fehl ● Schließen Sie den Drucker mit dem im Lieferumfang enthaltenen Kabel an die Telefonsteckdose an. Wie in der Abbildung zu sehen ist, muss das eine Ende des Telefonkabels an den Anschluss 1-LINE auf der Rückseite des Druckers und das andere Ende an die Telefonsteckdose angeschlossen werden. 1 Telefonsteckdose 2 Schließen Sie das im Lieferumfang des Druckers enthaltene Telefonkabel an den 1-LINE-Anschluss an.
Der Test „Wähltonerkennung“ schlägt fehl ● Andere Geräte, die dieselbe Telefonleitung wie der Drucker verwenden, lassen den Test möglicherweise fehlschlagen. Trennen Sie alle anderen Geräte von der Telefonleitung, und führen Sie den Test erneut durch, um sicherzustellen, dass das Problem nicht durch ein anderes Gerät verursacht wird. Wenn der Test für die Wähltonerkennung ohne die anderen Geräte erfolgreich durchgeführt werden kann, wird das Problem durch eines oder mehrere der Geräte verursacht.
Der Test „Zustand der Faxleitung“ schlägt fehl ● Vergewissern Sie sich, dass Sie den Drucker an eine analoge Telefonleitung anschließen. Ansonsten können Sie Faxe weder senden noch empfangen. Schließen Sie ein normales analoges Telefon an die Leitung an, und überprüfen Sie, ob ein Wählton zu hören ist, um herauszufinden, ob Sie über eine digitale Telefonleitung verfügen. Wenn Sie keinen normalen Wählton hören, handelt es sich wahrscheinlich um eine Telefonleitung für digitale Telefone.
Telefonhörer eines Nebenanschlusses nicht aufgelegt ist oder Sie gerade ein Computermodem zum Senden von E-Mails oder für den Zugriff auf das Internet verwenden. Beim Senden und Empfangen von Faxnachrichten mit dem Drucker treten Probleme auf ● Schalten Sie den Drucker ein. Überprüfen Sie das Display des Druckers. Wenn nichts zu sehen ist und die LED (Netz) nicht leuchtet, ist der Drucker ausgeschaltet. Vergewissern Sie sich, dass das Netzkabel fest am Drucker und in eine Steckdose eingesteckt ist.
● Prüfen Sie, ob ein anderer Prozess einen Fehler verursacht hat. Überprüfen Sie das Display und Ihren Computerbildschirm auf Fehlermeldungen und Lösungsvorschläge. Falls ein Fehler vorliegt, muss dieser erst behoben werden, bevor der Drucker ein Fax senden oder empfangen kann. ● Die Telefonverbindung ist möglicherweise schlecht. Telefonleitungen mit schlechter Tonqualität (Rauschen) können zu Faxproblemen führen.
Das Senden von Faxen mit dem Drucker ist nicht möglich, das Empfangen von Faxen dagegen schon ● Wenn Sie keinen Spezialtondienst verwenden, stellen Sie die Option Spezialton des Druckers auf Alle Ruftöne ein. Weitere Informationen finden Sie unter Ändern des Ruftonmusters zur Ruftonunterscheidung. ● Wenn Autom. Empfang auf Aus eingestellt ist, müssen Sie Faxnachrichten manuell entgegennehmen. Andernfalls empfängt der Drucker die Faxnachricht nicht.
Ende der Ansage eine Sprechpause von mindestens 5 Sekunden. Dabei dürfen im Hintergrund keine Geräusche zu hören sein. Versuchen Sie erneut, ein Fax zu empfangen. HINWEIS: Bei einigen digitalen Anrufbeantwortern wird die aufgenommene Sprechpause am Ende der Ansage nicht beibehalten. Spielen Sie die Ansage ab, um dies zu überprüfen. ● Wenn der Drucker eine Telefonleitung gemeinsam mit anderen Telekommunikationsgeräten, z. B.
Anrufbeantworter nicht wie empfohlen anschließen, werden möglicherweise Faxsignaltöne auf dem Anrufbeantworter aufgezeichnet. ● Stellen Sie sicher, dass der Drucker für den automatischen Faxempfang konfiguriert und die Option Töne bis Antwort richtig eingestellt ist. Die Anzahl der Ruftöne bis zur Entgegennahme eines Anrufs müssen für den Drucker also höher sein als für den Anrufbeantworter.
Beheben von Problemen bei der Verwendung von Webdiensten Falls Probleme auftreten, wenn Sie Webdienste wie HP ePrint und HP Drucksachen verwenden, überprüfen Sie die folgenden Punkte: ● Vergewissern Sie sich, dass der Drucker über eine Ethernet- oder eine Wireless-Verbindung mit dem Internet verbunden ist. HINWEIS: Die Webfunktionen sind nicht verfügbar, wenn der Drucker über ein USB-Kabel angeschlossen ist.
TIPP: Besuchen Sie für weitere Unterstützung zur Einrichtung und Verwendung von Webdiensten HP Connected unter www.hpconnected.com. Beheben von Netzwerkproblemen In diesem Abschnitt finden Sie Lösungen zu gängigen Problemen, wenn Sie den Drucker nicht über Ihr Netzwerk verbinden oder verwenden können.
Stellen Sie Folgendes sicher: ● Wenn Sie eine Wireless-Verbindung verwenden, müssen Sie sich vergewissern, dass die Wireless-LED leuchtet. Weitere Informationen hierzu finden Sie unter Ein- oder Ausschalten der Wireless-Funktionen des Druckers. ● Stellen Sie bei einer Ethernet-Verbindung sicher, dass Sie das Ethernet-Kabel anschließen, wenn Sie beim Installieren der Software dazu aufgefordert werden.
Tabelle 10-1 Machen Sie sich mit dem Verhalten der Wireless-LED (802.11) am Drucker vertraut. (Fortsetzung) LED-Beschreibung/Leuchtmuster Beschreibung Die Wireless-LED leuchtet. Die Wireless-Funktionen des Druckers sind eingeschaltet, und der Drucker ist mit einem Netzwerk verbunden. Versuchen Sie mit den folgenden Schritten, den Drucker wireless zu verbinden. 1. Vergewissern Sie sich, dass die Wireless-LED (802.11) leuchtet.
a. Öffnen Sie die Druckersoftware. Weitere Informationen hierzu finden Sie unter Öffnen der HP Druckersoftware (Windows). b. Wählen Sie das Dienstprogramm IP-Adresse aktualisieren aus. Wenn während des Tests Fehler auftreten, lesen Sie die im Testbericht enthaltenen Anweisungen zur Fehlerbehebung. Führen Sie anschließend den Test erneut aus. 4. Führen Sie den Wireless-Test aus, um sicherzustellen, dass die Wireless-Verbindung korrekt funktioniert. a.
● Warten des Druckkopfs und der Tintenpatronen Scannerglas reinigen Staub und Schmutz auf dem Scannerglas, der Unterseite des Scanner-Deckels oder dem ScannerRahmen können die Leistung verlangsamen, die Scanqualität vermindern und die Genauigkeit von Sonderfunktionen, z. B. das Anpassen von Kopien an ein bestimmtes Papierformat, beeinträchtigen.
Reinigen des Vorlageneinzugs Wenn der Vorlageneinzug mehrere Seiten gleichzeitig einzieht oder wenn er Normalpapier nicht einzieht, sollten Sie die Walzen und den Trennsteg reinigen. So reinigen Sie die Walzen oder den Trennblock: VORSICHT! Schalten Sie vor der Reinigung den Drucker durch Drücken der Taste und ziehen Sie den Netzstecker aus der Netzsteckdose. 1. DEWW (Netz) aus Nehmen Sie alle Originale aus dem Vorlageneinzug.
2. Heben Sie die Abdeckung des Vorlageneinzugs an. Dadurch erhalten Sie einfachen Zugang zu den Walzen (1) und zum Trennsteg (2). 3. 1 Walzen 2 Trennblock Feuchten Sie ein sauberes fusselfreies Tuch leicht mit destilliertem Wasser an und wringen Sie überschüssige Flüssigkeit aus dem Tuch.
4. Wischen Sie mit dem angefeuchteten Tuch die Rückstände von den Walzen und vom Trennblock ab. HINWEIS: Wenn sich die Rückstände nicht mit destilliertem Wasser entfernen lassen, verwenden Sie Isopropylalkohol. 5. Schließen Sie die Abdeckung des Vorlageneinzugs. Warten des Druckkopfs und der Tintenpatronen Wenn Probleme beim Drucken auftreten, kann der Druckkopf die Ursache dafür sein.
So reinigen Sie die Druckköpfe, richten diese aus oder vermeiden Sie verschmierte Tinte 1. Legen Sie unbenutztes weißes Normalpapier im Format Letter oder DIN A4 in das Zufuhrfach ein. Weitere Informationen hierzu finden Sie unter Einlegen von Papier. 2. Tippen Sie auf dem Bedienfelddisplay des Druckers auf Einrichtung. 3. Tippen Sie auf Druckerwartung, wählen Sie die gewünschte Option aus und befolgen Sie dann die angezeigten Anweisungen.
b. Suchen Sie im Drucker nach gestautem Papier, ergreifen Sie dieses mit beiden Händen und ziehen Sie es in Ihre Richtung. ACHTUNG: Wenn das Papier reißt, während Sie versuchen, es zwischen den Walzen hervorzuziehen, untersuchen Sie Walzen und Rädchen gründlich auf zurückgebliebene Papierstückchen und entfernen Sie diese. Wenn Sie nicht alle Papierreste aus dem Drucker entfernen, kommt es mit großer Wahrscheinlichkeit zu weiteren Papierstaus.
c. 3. Setzen Sie die Papierpfadabdeckung wieder in den Drucker ein, bis diese einrastet. Besteht das Problem danach weiterhin, überprüfen Sie den Druckpatronenbereich im Drucker. ACHTUNG: ist. a. Vermeiden Sie dabei, das Kabel zu berühren, das am Patronenwagen angebracht Wenn gestautes Papier vorhanden ist, schieben Sie den Patronenwagen im Drucker ganz nach rechts. Greifen Sie das gestaute Papier mit beiden Händen und ziehen Sie es in Ihre Richtung.
b. 4. Schließen Sie die Zugangsklappe zu den Tintenpatronen. 5. Besteht das Problem weiterhin, überprüfen Sie den Bereich mit den Fächern. a. DEWW Schieben Sie den Patronenwagen im Drucker ganz nach links und gehen Sie wie im vorherigen Arbeitsschritt vor, um abgerissene Papierstücke zu entfernen. Heben Sie das Ausgabefach an.
b. Ziehen Sie das Zufuhrfach heraus, um es zu verlängern. c. Drücken Sie die Tasten an beiden Seiten des Zufuhrfachs nach unten und ziehen Sie das Zufuhrfach heraus. d. Überprüfen Sie die Öffnung im Drucker, in der sich zuvor das Zufuhrfach befand. Ist gestautes Papier vorhanden, ergreifen Sie mit beiden Händen das Papier in der Öffnung und ziehen Sie es in Ihre Richtung.
e. Setzen Sie das Zufuhrfach ein, legen Sie Papier ein und klappen Sie das Ausgabefach nach unten. Klicken Sie hier, um mithilfe der HP Online-Fehlerbehebungsfunktion Papierstaus zu beheben. Wenn der Patronenwagen klemmt, klicken Sie hier, um mithilfe der HP OnlineFehlerbehebungsfunktion den Patronenwagen frei zu geben. Zurzeit ist die Website ggf. nicht in allen Sprachen verfügbar. So beseitigen Sie Papierstaus im Vorlageneinzug 1. DEWW Heben Sie die Abdeckung des Vorlageneinzugs an.
2. Heben Sie die grüne Arretierung an der vorderen Kante des Vorlageneinzugs an.
3. Ziehen Sie das gestaute Papier vorsichtig aus den Walzen heraus. ACHTUNG: Wenn das Papier reißt, während Sie versuchen, es zwischen den Walzen hervorzuziehen, untersuchen Sie Walzen und Rädchen gründlich auf Papierreste. Diese dürfen nicht im Drucker verbleiben. Wenn Sie nicht alle Papierreste aus dem Drucker entfernen, kommt es mit großer Wahrscheinlichkeit zu weiteren Papierstaus. 4. Schließen Sie die Abdeckung des Vorlageneinzugs, indem Sie diese bis zum Einrasten nach unten drücken.
● Legen Sie ausschließlich Stapel mit identischem Papiertyp und -format in das Zufuhrfach ein. ● Stellen Sie die Papierquerführungen im Zufuhrfach so ein, dass sie eng am Papier anliegen. Vergewissern Sie sich, dass die Papierquerführungen das Papier im Zufuhrfach nicht zusammendrücken. ● Schieben Sie das Papier nicht zu weit in das Zufuhrfach hinein. ● Wenn Papier beidseitig bedruckt wird, dürfen Sie keine Bilder mit hoch gesättigten Farben auf leichtes Papier drucken.
● Foto ● Netzwerk ● Webdienste ● Druckereinrichtung Tippen Sie auf Wiederherstellen. 6. Daraufhin wird in einer Meldung mitgeteilt, dass die Einstellungen wiederhergestellt wurden. Tippen Sie auf Ja. So stellen Sie die werkseitigen Standardeinstellungen auf dem Drucker wieder her 1. Tippen Sie auf dem Bedienfeld des Druckers auf Einrichtung. 2. Tippen Sie auf Druckerwartung. 3. Tippen Sie auf Wiederherstellen. 4. Tippen Sie auf Werkseinst. wiederherstellen.
A Technische Daten Dieser Abschnitt behandelt folgende Themen: ● Spezifikationen ● Zulassungshinweise ● Programm zur umweltfreundlichen Produktherstellung Spezifikationen Weitere Informationen finden Sie unter www.hp.com/support. Wählen Sie Ihr Land/Ihre Region aus. Klicken Sie auf Produkte Support & Fehlerbehebung. Geben Sie den Namen ein, der an der Vorderseite des Druckers steht und wählen Sie dann Suchen aus. Klicken Sie auf Produktinformationen und dann auf Produktspezifikationen.
Papierformat und -gewicht Eine vollständige Liste der unterstützten Papierformate finden Sie in der HP Druckersoftware.
Medium (1) Linker Rand (2) Rechter Rand (3) Oberer Rand (4) Unterer Rand US-Letter 3 mm (0,12 Zoll) 3 mm (0,12 Zoll) 3 mm (0,12 Zoll) 3 mm (0,12 Zoll) 3 mm (0,12 Zoll) 3 mm (0,12 Zoll) 16,5 mm (0,65 Zoll) 16,5 mm (0,65 Zoll) US-Legal A4 US-Executive B5 A5 Karten Medien in Sonderformaten Fotomedien Umschläge Kopierspezifikationen ● Digitale Bildverarbeitung ● Die Kopiergeschwindigkeit variiert je nach Komplexität des Dokuments und je nach Modell ● Bis zu 99 Kopien eines Originals ● Digi
Faxspezifikationen ● Eigenständiges Schwarzweiß- und Farbfaxgerät. ● Manuelles Senden und Empfangen von Faxnachrichten. ● Automatische Wahlwiederholung bei belegter Leitung mit bis zu fünf Versuchen (je nach Land/ Region). ● Automatische Wahlwiederholung bei keiner Antwort bis zu zwei Mal (je nach Land/Region) ● Automatische Wahlwiederholung bei Kommunikationsproblemen mit bis zu fünf Versuchen (je nach Land/Region). ● Bestätigungs- und Aktivitätsberichte.
● FCC-Erklärung ● Hinweis für Benutzer in Korea ● VCCI (Klasse B)-Konformitätserklärung für Benutzer in Japan ● Hinweis zum Netzkabel für Benutzer in Japan ● Hinweis zur Geräuschemission (für Deutschland) ● Hinweis zu Bildschirmarbeitsplätzen in Deutschland ● Hinweis für Benutzer des US-amerikanischen Telefonnetzes: FCC-Anforderungen ● Hinweis für Benutzer des kanadischen Telefonnetzes ● Hinweis für Benutzer im Europäischen Wirtschaftsraum ● Hinweis für Benutzer des deutschen Telefonnetze
FCC-Erklärung Hinweis für Benutzer in Korea VCCI (Klasse B)-Konformitätserklärung für Benutzer in Japan Hinweis zum Netzkabel für Benutzer in Japan DEWW Zulassungshinweise 141
Hinweis zur Geräuschemission (für Deutschland) Hinweis zu Bildschirmarbeitsplätzen in Deutschland 142 Anhang A Technische Daten DEWW
Hinweis für Benutzer des US-amerikanischen Telefonnetzes: FCCAnforderungen DEWW Zulassungshinweise 143
Hinweis für Benutzer des kanadischen Telefonnetzes Hinweis für Benutzer im Europäischen Wirtschaftsraum 144 Anhang A Technische Daten DEWW
Hinweis für Benutzer des deutschen Telefonnetzes Hinweise zu Fax (verkabelt) in Australien Europäische Union – Rechtlicher Hinweis Produkte, die das CE-Siegel tragen, erfüllen mindestens eine der folgenden EG-Richtlinien: Niederspannungsrichtlinie 2006/95/EG, EMV-Richtlinie 2004/108/EG, Ökodesign-Richtlinie 2009/125/ EG, Telekommunikationsrichtlinie 1999/5/EG, RoHS-Richtlinie 2011/65/EU.
Erklärung zu Telefonnetzen in Europa (Modem/Fax) HP Produkte mit Faxfunktionalität erfüllen die Anforderungen der Telekommunikationsrichtline 1999/5/EG (Anhang II) und tragen das entsprechende CE-Siegel. Aufgrund der Unterschiede zwischen den jeweiligen öffentlichen Telefonnetzen in den einzelnen Ländern/Regionen bietet die Genehmigung an sich jedoch keine bedingungslose Gewährleistung für den einwandfreien Betrieb an jedem Hauptanschluss des öffentlichen Telefonnetzes.
Konformitätserklärung DEWW Zulassungshinweise 147
Zulassungshinweise für Wireless-Produkte Dieser Abschnitt enthält folgende Informationen über gesetzliche Regelungen zu Wireless-Produkten: ● Belastung durch Hochfrequenzstrahlung ● Hinweis für Benutzer in Brasilien ● Hinweis für Benutzer in Kanada ● Hinweis für Benutzer in Taiwan ● Hinweis für Benutzer in Mexiko ● Hinweis zum Funkbetrieb für Benutzer in Japan Belastung durch Hochfrequenzstrahlung Hinweis für Benutzer in Brasilien 148 Anhang A Technische Daten DEWW
Hinweis für Benutzer in Kanada Hinweis für Benutzer in Taiwan DEWW Zulassungshinweise 149
Hinweis für Benutzer in Mexiko Hinweis zum Funkbetrieb für Benutzer in Japan Programm zur umweltfreundlichen Produktherstellung Hewlett-Packard hat sich zur umweltfreundlichen Herstellung nachhaltiger Produkte verpflichtet. ● Das Produkt ist so konzipiert, dass es recycelt werden kann. ● Die Anzahl der verwendeten Materialien wurde auf ein Minimum reduziert, ohne die Funktionalität und Zuverlässigkeit des Druckers einzuschränken. ● Verbundstoffe wurden so entwickelt, dass sie einfach zu trennen sind.
● Richtlinie zur Beschränkung der Verwendung gefährlicher Stoffe (Indien) ● EPEAT ● China SEPA Öko-Label – Benutzerinformationen Papierverbrauch Dieses Produkt ist für die Verwendung von Recyclingpapier gemäß DIN 19309 und EN 12281:2002 geeignet. Kunststoff Kunststoffteile mit einem Gewicht von mehr als 25 Gramm sind gemäß internationalen Normen gekennzeichnet, um die Identifizierung des Kunststoffs zu Recyclingzwecken nach Ablauf der Lebensdauer des Produkts zu vereinfachen.
Leistungsaufnahme Hewlett-Packard Druck- und Bildbearbeitungsausstattung, die mit dem ENERGY STAR® Logo versehen ist, wurde gemäß den ENERGY STAR Spezifikationen für Bildbearbeitungsausstattung der US-Umweltschutzbehörde zertifiziert. Auf ENERGY STAR zertifizierten Bildbearbeitungsprodukten befindet sich das folgende Zeichen: Weitere Informationen zu Produktmodellen, die für ENERGY STAR zertifiziert sind, finden Sie unter: www.hp.
Tabelle mit giftigen und gefährlichen Stoffen (China) Richtlinie zur Beschränkung der Verwendung gefährlicher Stoffe (Ukraine) Richtlinie zur Beschränkung der Verwendung gefährlicher Stoffe (Indien) EPEAT DEWW Programm zur umweltfreundlichen Produktherstellung 153
China SEPA Öko-Label – Benutzerinformationen 154 Anhang A Technische Daten DEWW
B Zusätzliche Faxeinrichtung Wenn Sie alle Schritte des Leitfadens zur Inbetriebnahme ausgeführt haben, können Sie mit den Anweisungen in diesem Abschnitt das Einrichten der Faxfunktion abschließen. Bewahren Sie den Leitfaden zur Inbetriebnahme für die spätere Verwendung auf. In diesem Abschnitt wird das Einrichten der Faxfunktion des Druckers erläutert, damit diese mit Geräten und Diensten, die über eine einzelne Telefonleitung angeschlossen sind, verwendet werden kann.
Tabelle B-1 Länder/Regionen mit einem parallelen Telefonsystem Argentinien Australien Brasilien Kanada Chile China Kolumbien Griechenland Indien Indonesien Irland Japan Korea Lateinamerika Malaysia Mexiko Philippinen Polen Portugal Russland Saudi-Arabien Singapur Spanien Taiwan (Republik China) Thailand USA Venezuela Vietnam Wenn Sie nicht genau wissen, über welches Telefonsystem Sie verfügen (seriell oder parallel), wenden Sie sich an Ihre Telefongesellschaft.
1. Prüfen Sie, ob es sich bei Ihrem Telefonsystem um ein serielles oder ein paralleles System handelt. Weitere Informationen hierzu finden Sie unter Einrichten der Faxfunktion (für parallele Telefonsysteme). 2. 3. a. Serielles Telefonsystem – siehe Faxeinrichtung für serielle Telefonsysteme. b. Paralleles Telefonsystem – wechseln Sie zu Schritt 2. Wählen Sie die Kombination aus Ausstattung und Diensten aus, die die Faxleitung gemeinsam verwenden. ● DSL: DSL-Dienst Ihrer Telefongesellschaft.
Andere Geräte/Dienste an der Faxleitung DSL PBX Anru-ferunterscheidungsDienst Tele-fonan-rufe Empfohlene Faxeinrichtung Compu-termodem Anruf-beantworter Voice-mailDienst Szenario A: Separater Faxanschluss (es werden keine Telefongespräche geführt) Szenario B: Einrichten des Druckers für DSL Szenario C: Einrichten des Druckers für ein PBXSystem oder einen ISDNAnschluss Szenario D: Faxfunktion mit Rufzeichenmuster am gleichen Anschluss Szenario E: Gemeinsamer Anschluss für Telefon-/ Faxanrufe Szenario
Szenario A: Separater Faxanschluss (es werden keine Telefongespräche geführt) Wenn Sie eine separate Telefonleitung besitzen, auf der Sie keine Telefonanrufe empfangen und an die keine weiteren Geräte angeschlossen sind, richten Sie den Drucker wie in diesem Abschnitt beschrieben ein. Abbildung B-1 Rückansicht des Druckers 1 Telefonsteckdose 2 Schließen Sie das im Lieferumfang des Druckers enthaltene Telefonkabel an den 1-LINEAnschluss an. Sie müssen das mitgelieferte Telefonkabel ggf.
Szenario B: Einrichten des Druckers für DSL Wenn Sie über einen DSL-Dienst Ihrer Telefongesellschaft verfügen und keine weitere Ausstattung an den Drucker anschließen, finden Sie im folgenden Abschnitt Anweisungen zum Anschließen eines DSL-Filters zwischen der Telefonsteckdose und dem Drucker. Der DSL-Filter filtert das Digitalsignal, das Ihren Drucker daran hindert, ordnungsgemäß mit der Telefonleitung zu kommunizieren. (DSL wird in Ihrem Land/Ihrer Region möglicherweise als ADSL bezeichnet.
3. Schließen Sie den DSL-Filter mit einem weiteren Telefonkabel an die Telefonsteckdose an. 4. Testen Sie die Faxfunktion. Sollten Probleme beim Einrichten des Druckers mit der optionalen Ausstattung auftreten, bitten Sie Ihren lokalen Dienstanbieter oder Händler um Unterstützung.
Szenario D: Faxfunktion mit Rufzeichenmuster am gleichen Anschluss Wenn Sie einen Spezialtondienst Ihres Telekommunikationsanbieters nutzen, der mehrere Telefonnummern mit unterschiedlichen Ruftonfolgen an einer Telefonleitung unterstützt, richten Sie den Drucker wie in diesem Abschnitt beschrieben ein. Abbildung B-3 Rückansicht des Druckers 1 Telefonsteckdose 2 Schließen Sie das im Lieferumfang des Druckers enthaltene Telefonkabel an den 1-LINEAnschluss an.
TIPP: Sie können die Ruftonunterscheidung auch mit der Funktion „Sonderrufton“ am Bedienfeld des Druckers einstellen. Bei dieser Funktion wird das Ruftonmuster eines eingehenden Anrufs vom Drucker erkannt und aufgezeichnet. Dieser Anruf dient zur automatischen Erkennung des Ruftonmusters, das von Ihrer Telefongesellschaft für Faxanrufe zugeordnet wurde. Weitere Informationen finden Sie unter Ändern des Ruftonmusters zur Ruftonunterscheidung. 4.
So richten Sie den Drucker für die Verwendung eines gemeinsamen Telefon-/Faxanschlusses ein: 1. Schließen Sie ein Ende des mit dem Drucker gelieferten Telefonkabels an die Telefonsteckdose und das andere Ende an den 1-LINE-Anschluss an der Rückseite des Druckers an. HINWEIS: Sie müssen das mitgelieferte Telefonkabel ggf. an den mitgelieferten Adapter für Ihr Land/Ihre Region anschließen.
Abbildung B-5 Rückansicht des Druckers 1 Telefonsteckdose 2 Schließen Sie das im Lieferumfang des Druckers enthaltene Telefonkabel an den 1-LINEAnschluss an. Sie müssen das mitgelieferte Telefonkabel ggf. an den mitgelieferten Adapter für Ihr Land/ Ihre Region anschließen. So richten Sie den Drucker für die Verwendung mit einem Voicemail-Dienst ein: 1.
HINWEIS: Wenn Sie ein Computermodem verwenden, wird die Telefonleitung gemeinsam vom Modem und vom Drucker verwendet. Sie können das Modem und den Drucker nicht gleichzeitig verwenden. Sie können beispielsweise keine Faxe mit dem Drucker senden, wenn Sie gerade das Computermodem zum Senden von E-Mail-Nachrichten oder zum Zugreifen auf das Internet verwenden.
3. Schließen Sie ein Ende des mit dem Drucker gelieferten Telefonkabels an die Telefonsteckdose und das andere Ende an den 1-LINE-Anschluss an der Rückseite des Druckers an. HINWEIS: Sie müssen das mitgelieferte Telefonkabel ggf. an den mitgelieferten Adapter für Ihr Land/Ihre Region anschließen. Wenn Sie den Drucker nicht mit dem mitgelieferten Kabel an das Telefonnetz anschließen, können Sie möglicherweise keine Faxnachrichten senden.
3 DSL-/ADSL-Filter Schließen Sie ein Ende des Telefonkabels, das mit dem Drucker geliefert wurde, an den Anschluss 1-LINE auf der Rückseite des Druckers an. Schließen Sie das andere Ende des Kabels an den DSL/ADSL-Filter an. Sie müssen das mitgelieferte Telefonkabel ggf. an den mitgelieferten Adapter für Ihr Land/ Ihre Region anschließen. 4 Computer 5 DSL-/ADSL-Modem HINWEIS: Sie benötigen einen Splitter für parallele Leitungen.
HINWEIS: Wenn Ihr Computer nur über einen Telefonanschluss verfügt, müssen Sie einen Splitter für parallele Leitungen (auch Koppler genannt) verwenden, wie in der Abbildung gezeigt. (Ein Splitter für parallele Leitungen verfügt über einen RJ-11-Anschluss auf der Vorderseite und zwei RJ-11Anschlüsse auf der Rückseite.
3 Splitter für parallele Leitungen 4 Computer mit Modem 5 Telefon So richten Sie den Drucker für denselben Telefonanschluss ein, der von einem Computer mit zwei Telefonsteckdosen verwendet wird 1. Ziehen Sie den weißen Stecker aus dem 2-EXT-Anschluss an der Rückseite des Druckers. 2. Suchen Sie das Telefonkabel, das von Ihrem Computer bzw. Computermodem zur Telefonsteckdose führt.
Sollten Probleme beim Einrichten des Druckers mit der optionalen Ausstattung auftreten, bitten Sie Ihren lokalen Dienstanbieter oder Händler um Unterstützung. Gemeinsame Leitung für Telefon-/Faxanrufe und DSL-/ADSL-Modem Befolgen Sie diese Anweisungen, wenn der Computer über ein DSL-/ADSL-Modem verfügt.
So richten Sie den Drucker für die Verwendung mit einem DSL-/ADSL-Modem ein: 1. Besorgen Sie sich einen DSL-Filter von Ihrem DSL-Provider. HINWEIS: Andere Telefone im Haushalt/Büro, die dieselbe Rufnummer wie der DSL-Dienst besitzen, müssen an zusätzliche DSL-Filter angeschlossen werden, um Rauschen beim Führen von Sprachanrufen zu verhindern. 2.
Szenario I: Gemeinsamer Anschluss für Telefon-/Faxanrufe mit Anrufbeantworter Wenn Sie unter derselben Telefonnummer sowohl Telefon- als auch Faxanrufe empfangen und darüber hinaus diese Telefonleitung für einen Anrufbeantworter verwenden, richten Sie den Drucker wie in diesem Abschnitt beschrieben ein. Abbildung B-11 Rückansicht des Druckers 1 Telefonsteckdose 2 Schließen Sie das im Lieferumfang des Druckers enthaltene Telefonkabel an den 1-LINEAnschluss an der Rückseite des Druckers an.
3. Schließen Sie ein Ende des mit dem Drucker gelieferten Telefonkabels an die Telefonsteckdose und das andere Ende an den 1-LINE-Anschluss an der Rückseite des Druckers an. HINWEIS: Sie müssen das mitgelieferte Telefonkabel ggf. an den mitgelieferten Adapter für Ihr Land/Ihre Region anschließen. Wenn Sie den Drucker nicht mit dem mitgelieferten Kabel an das Telefonnetz anschließen, können Sie möglicherweise keine Faxnachrichten senden.
HINWEIS: Wenn Ihr Computer nur über einen Telefonanschluss verfügt, müssen Sie einen Splitter für parallele Leitungen (auch Koppler genannt) verwenden, wie in der Abbildung gezeigt. (Ein Splitter für parallele Leitungen verfügt über einen RJ-11-Anschluss auf der Vorderseite und zwei RJ-11Anschlüsse auf der Rückseite.
3. Ziehen Sie das Kabel des Anrufbeantworters aus der Telefonsteckdose, und schließen Sie es an den Anschluss „OUT“ auf der Rückseite des Computers (dem Computermodem) an. 4. Schließen Sie ein Ende des mit dem Drucker gelieferten Telefonkabels an die Telefonsteckdose und das andere Ende an den 1-LINE-Anschluss an der Rückseite des Druckers an. HINWEIS: Sie müssen das mitgelieferte Telefonkabel ggf. an den mitgelieferten Adapter für Ihr Land/Ihre Region anschließen.
Gemeinsame Leitung für Telefon-/Faxanrufe, DSL-/ADSL-Modem und Anrufbeantworter 1 Telefonsteckdose 2 Splitter für parallele Leitungen 3 DSL-/ADSL-Filter 4 Mitgeliefertes Telefonkabel, angeschlossen am 1-LINE-Anschluss an der Rückseite des Druckers Sie müssen das mitgelieferte Telefonkabel ggf. an den mitgelieferten Adapter für Ihr Land/ Ihre Region anschließen. 5 DSL-/ADSL-Modem 6 Computer 7 Anrufbeantworter 8 Telefon (optional) HINWEIS: Sie benötigen einen Splitter für parallele Leitungen.
So richten Sie den Drucker für die Verwendung mit einem DSL-/ADSL-Modem ein: 1. Erwerben Sie von Ihrem DSL-/ADSL-Anbieter einen DSL-/ADSL-Filter. HINWEIS: Andere Telefone im Haushalt/Büro, die dieselbe Rufnummer wie der DSL-/ADSLDienst besitzen, müssen an zusätzliche DSL-/ADSL-Filter angeschlossen werden, um Rauschen beim Führen von Sprachanrufen zu verhindern. 2.
HINWEIS: Faxsendungen können nicht automatisch empfangen werden, wenn Sie einen VoicemailDienst für dieselbe Telefonnummer nutzen, die Sie für den Faxempfang verwenden. Sie müssen eingehende Faxanrufe demnach manuell entgegennehmen. Wenn Sie Faxnachrichten automatisch empfangen möchten, wenden Sie sich für die Einrichtung eines Rufzeichenmusters oder eines separaten Faxanschlusses an Ihren Telekommunikationsanbieter.
3 Computer mit Modem 4 Telefon So richten Sie den Drucker für denselben Telefonanschluss ein, der von einem Computer mit zwei Telefonsteckdosen verwendet wird: 1. Ziehen Sie den weißen Stecker aus dem 2-EXT-Anschluss an der Rückseite des Druckers. 2. Suchen Sie das Telefonkabel, das von Ihrem Computer bzw. Computermodem zur Telefonsteckdose führt. Ziehen Sie das Kabel aus der Telefonsteckdose, und schließen Sie es an den 2-EXT-Anschluss auf der Rückseite des Druckers an. 3.
Schweden www.hp.se/faxconfig Norwegen www.hp.no/faxconfig Niederlande www.hp.nl/faxconfig Belgien (niederländisch) www.hp.be/nl/faxconfig Belgien (Französisch) www.hp.be/fr/faxconfig Portugal www.hp.pt/faxconfig Spanien www.hp.es/faxconfig Frankreich www.hp.com/fr/faxconfig Irland www.hp.com/ie/faxconfig Italien www.hp.
korrekt sind. Eine nicht ausgefüllte oder falsche Faxeinstellung kann zu Faxproblemen führen. ● Wenn der Test fehlschlägt, untersuchen Sie den Bericht auf nähere Informationen zur Beseitigung des aufgetretenen Problems.
C Fehler (Windows) ● Niedriger Tintenstand ● Sehr wenig Tinte ● Probleme mit den Tintenpatronen ● Falsches Format ● Tintenpatronenwagen ist blockiert ● Papierstau oder Problem mit dem Fach ● Kein Papier mehr ● Dokument konnte nicht gedruckt werden ● Druckerfehler ● Klappe offen ● Tintenpatrone defekt ● Problem beim Druckerzubehör-Upgrade ● Beratung bei gefälschten Patronen ● SETUP-Patronen verwenden ● Keine SETUP-Patronen verwenden ● Inkompatible Tintenpatronen ● Problem be
Die Warnungen und Hinweise in Bezug auf die Tintenfüllstände sind lediglich Schätzwerte, die der besseren Planung dienen. Wenn eine Warnung in Bezug auf einen niedrigen Tintenfüllstand angezeigt wird, sollten Sie eine Ersatzpatrone bereithalten, um mögliche Verzögerungen beim Druck zu vermeiden. Sie müssen die Druckpatronen erst auswechseln, wenn die Druckqualität nicht mehr zufriedenstellend ist. Die Informationen zum Auswechseln der Tintenpatronen finden Sie unter Auswechseln der Tintenpatronen.
Stellen Sie sicher, dass alle Tintenpatronen korrekt eingesetzt sind: 1. Schalten Sie den Drucker ein. 2. Öffnen Sie die Zugangsklappe zu den Tintenpatronen. HINWEIS: Warten Sie, bis der Patronenwagen zum Stillstand kommt, bevor Sie fortfahren. 3. Drücken Sie auf die Vorderseite der Tintenpatrone, um sie frei zu geben, und nehmen Sie diese anschließend aus der Halterung. 4. Setzen Sie die Patrone in die Halterung ein. Drücken Sie fest auf die Patrone, um guten Kontakt zu gewährleisten. 5.
Weitere Informationen finden Sie unter Einlegen von Papier. Dokument konnte nicht gedruckt werden Das Dokument konnte nicht gedruckt werden, weil ein Problem im Drucksystem aufgetreten ist. Informationen zum Beheben von Druckproblemen finden Sie im Abschnitt Beheben von Druckerproblemen. Druckerfehler Es lag ein Problem mit dem Drucker oder dem Tintensystem vor. In der Regel lassen sich derartige Probleme mit den folgenden Schritten beheben: 1. Drücken Sie 2.
SETUP-Patronen verwenden Beim ersten Einrichten des Druckers müssen Sie die Patronen einsetzen, die im Karton mit dem Drucker geliefert wurden. Diese Patronen sind mit der Aufschrift SETUP gekennzeichnet, und sie dienen zum Kalibrieren des Druckers, bevor der erste Druckauftrag ausgeführt wird. Wenn die SETUP-Patronen bei der anfänglichen Einrichtung des Produkts nicht eingesetzt sind, führt dies zu einem Fehler.
1. Schalten Sie den Drucker ein. 2. Öffnen Sie die Zugangsklappe zu den Tintenpatronen. HINWEIS: Warten Sie, bis der Patronenwagen zum Stillstand kommt, bevor Sie fortfahren. 3. Drücken Sie auf die Vorderseite der Tintenpatrone, um sie frei zu geben, und nehmen Sie diese anschließend aus der Halterung. 4. Setzen Sie die Patrone in die Halterung ein. Drücken Sie fest auf die Patrone, um guten Kontakt zu gewährleisten. 5. Schließen Sie die Zugangsklappe zu den Tintenpatronen.
Drucken nicht möglich Der Drucker muss mit HP Connected verbunden werden, um den Instant Ink Status des Druckers zu aktualisieren. Sie können nicht drucken, bis die Verbindung zum Drucker hergestellt wurde, um den Instant Ink Status zu aktualisieren. Weitere Informationen zum Herstellen der Verbindung finden Sie auf dem Druckerbedienfeld. Ausgabefach geschlossen Öffnen Sie das Ausgabefach, um den Druckvorgang fortzusetzen.
Index A ADSL, Faxeinrichtung für parallele Telefonsysteme 160 Anrufbeantworter einrichten mit Fax und Modem 174 Faxtöne werden aufgezeichnet 115 mit Fax einrichten (parallele Telefonsysteme) 173 Anschlüsse, Position 5 Antwortruftonmuster parallele Telefonsysteme 162 Anzeigen Netzwerkeinstellungen 79 Ausgabefach Position 4 Automatische Verkleinerung von Faxnachrichten 51 B Baud-Rate 60 Bearbeiten Text in OCR-Programm 39 Bedienfeld LEDs 6 Symbole für Status 6 Tasten 6 Beide Seiten, drucken auf 28 Beidseitiger
Einrichtungsbedingungen für die Faxfunktion 156 Fax, für parallele Telefonsysteme 155 gemeinsamer Telefonanschluss (parallele Telefonsysteme) 163 ISDN-Anschluss (parallele Telefonsysteme) 161 PBX-System (parallele Telefonsysteme) 161 Rufzeichenmuster (parallele Telefonsysteme) 162 separater Faxanschluss (parallele Telefonsysteme) 159 Voicemail (parallele Telefonsysteme) 164 Voicemail und Computermodem (parallele Telefonsysteme) 178 Einrichtung Faxtest 181 Ruftonunterscheidung 58 Einrichtung (Schaltfläche) 7
Faxfunktion Fehlerkorrekturmodus 47 Spezifikationen 139 Faxkopfzeile 57 Faxnachricht Anrufbeantworter und Modem, gemeinsam (parallele Telefonsysteme) 174 empfangen 48 erneut drucken 49 Modem und Anrufbeantworter, gemeinsam (parallele Telefonsysteme) 174 über Internetprotokoll 61 Wahlüberwachung 47 Faxnachrichten senden aus dem Speicher 46 einfaches Fax 43 von einem Telefon aus 45 Wahlüberwachung 47 Faxnachrichten weiterleiten 50 Faxsicherung 49 Fehlende oder fehlerhafte Informationen, Fehlerbehebung 99 Fehl
Luftfeuchtigkeit 136 M Mac OS 22 Manuelles Faxen Empfangen 48 Senden 45 Medien Duplexdruck 28 Mehrfacheinzug, Fehlerbehebung 98 Modellnummer 91 Modem an gemeinsamem Anschluss für Telefon-/Faxanrufe (parallele Telefonsysteme) 168 an gemeinsamem Anschluss mit Fax und Voicemail (parallele Telefonsysteme) 178 gemeinsamer Anschluss mit Fax (parallele Telefonsysteme) 165 gemeinsam mit Fax und Anrufbeantworter (parallele Telefonsysteme) 174 N Nach Ablauf des Supportzeitraums 90 Netzanschluss, Position 5 Netzwerk
Senden einer Faxnachricht an mehrere Empfänger senden 47 Senden von Faxen Fehlerbehebung 112, 115 Senden von Faxnachrichten Wahlüberwachung 45 Senden von Scans Fehlerbehebung 102 für OCR 39 Serielle Telefonsysteme Einrichtungstypen 156 Länder/Regionen mit 155 Seriennummer 91 Software OCR 39 Webscan 39 Speicher Faxe speichern 49 Faxnachrichten erneut drucken 49 Speichern Faxe im Speicher 49 Spezifikationen Abmessungen und Gewicht 136 Geräuschemissionen 139 Papier 137 Systemanforderungen 136 Status Druckersta
Einzugsprobleme, Fehlerbehebung 123 reinigen 123 W Wähltontest, fehlgeschlagen 110 Wähltyp, Einstellung 59 Wahlüberwachung 45, 47 Wahlwiederholungsoptionen, Einstellung 59 Warten Druckkopf 125 Verschmierte Tinte 125 Wartung Auswechseln der Tintenpatronen 71 Diagnoseseite 95 Druckkopf 125 Druckkopf ausrichten 125 Druckkopf reinigen 126 reinigen 122 Tintenfüllstände überprüfen 71 Webscan 39 Websites Informationen zu Eingabehilfen 2 Kundendienst 89 Umweltprogramme 150 Webzugriffsbericht 96 Weiße Streifen oder
© 2014 Hewlett-Packard Development Company, L.P. www.hp.