User's Guide

Troubleshooting and Maintenance
Configuring the Computer
Corporate Evaluator’s Guide 149
Main Menu
Setting Description Default
BIOS Revision Shows the current BIOS version. Detected
automatically.
System Time Sets the time using 24-hour format. Values set take effect
immediately.
System Date
Sets the date using dd/mm/yy format (except English, which
uses mm/dd/yy format).
Internal Hard Disk Sets the hard disk drive type and various parameters. Detected
automatically.
Video Configuration Press ENTER to see or change the video settings below.
Press ESC to return to the main menu.
Quiet Boot When enabled, hides summary of power-on self-test and
messages during boot.
Enabled
Video Display Device
Sets whether the built-in display automatically switches to an
external display, if one is detected.
Auto
Video Expansion When enabled, the video image covers the entire display in
lower resolution modes. When disabled, the video image is
centered in the display.
Disabled
Primary Video
Adapter
Sets whether the computer automatically switches to an
external video adapter connected to the docking system, if
one is detected.
Auto
Television Type
Controls the signal format (NTSC or PAL) output by the
S-video port.
NTSC
System Memory Shows the system memory size. 640 KB
Extended Memory Shows the extended memory size.
Detected
automatically.
Unique Dock ID Sets whether the computer creates a unique hardware profile
for each dock (Enabled) or uses a common profile for all
docks (Disabled).
Enabled
UUID Displays the value of the 16-byte UUID (Universally Unique
ID) as 32 hex characters.
Detected
automatically.
MAC Address Displays the MAC network address of the internal (wired)
LAN.
Detected
automatically.
Serial Number Displays the serial number as shown on the back of the unit. Detected
automatically.
Service ID Displays an identifier used for repair service.
Detected
automatically.