User's Guide

Troubleshooting and Maintenance
Configuring the Computer
150 Corporate Evaluator’s Guide
System Devices Menu
Setting Description Default
PS/2 Pointing Devices Disables the internal pointing devices when an external PS/2
mouse is connected.
Auto
FDD Controller Enables the floppy drive. Enabled
Legacy USB Support Enables BIOS support for USB mouse, keyboard, and floppy
disk drive.
Disabled
Internal LAN Enables the internal (wired) LAN. Enabled
Mini PCI Slot 1 Enables the PCI slot normally used for a wireless LAN, which
is located under the door on the bottom of unit.
Enabled
Mini PCI Slot 2 Enables the PCI slot sometimes used for a modem. Enabled
Serial port Enables the serial port. Enabled
Base I/O address Sets the I/O address. 3F8h
Interrupt Sets the I/O interrupt. IRQ4
Infrared port Enables the infrared port. Disabled
Mode Sets the hardware to support FIR (Fast IR) or SIR (Standard
IR) infrared communications.
FIR
Base I/O address Sets the I/O address. 2F8h
Interrupt Sets the I/O interrupt. IRQ3
DMA channel Sets the DMA channel for Fast IR (FIR) mode. DMA0
Parallel Port Enables the parallel port. Enabled
Mode Sets the port to output only, bi-directional, EPP, or ECP. ECP
Base I/O Sets the I/O address. 378h
Interrupt Sets the I/O interrupt. IRQ7
DMA channel Sets the DMA channel for ECP mode. DMA3